We have studied the rheological characteristics of Texaco gasifier slag at high-temperature. Slag samples have been analyzed by X-ray fluorescence, X-ray diffraction, and scanning electron microscopy. The rheological behavior of the slag has been investigated experimentally using a high-temperature rheometer at temperatures between 1200 °C and 1340 °C. The effects of the shear rate and temperature on the rheological behavior of the slag have been explored. Moreover, the observed rheological behavior of the slag has been correlated with its solid-phase content, as calculated with the aid of the computer software package FactSage. The results show that the sensitivity of the slag viscosity to temperature decreases with increasing rotation speed. Above its liquidus temperature calculated by FactSage, the slag behaves as a Newtonian fluid; below its liquidus temperature, however, the rheological behavior of the slag becomes non-Newtonian owing to its increased solid-phase content. Meanwhile, Slag containing a number of crystalline particles shows dramatic shear-thinning and thixotropic behavior. Moreover, the shear-thinning behavior of the slag becomes ever more distinct as the temperature is decreased. The yield stress values of the slag and the number and particle size of the crystalline particles in the slag increase with decreasing temperature. 相似文献
High-field magnetic measurements were carried out in order to investigate behaviors of field-induced reverse martensitic transformation and kinetic arrest of NiCoMnSn metamagnetic shape memory alloy. In the thermomagnetization curves, it was confirmed that the reverse martensitic transformation temperature decreases 67 K by applying magnetic field of 5 T, while in the magnetic field cooling process under 5 T, martensitic transformation does not occur down to low temperatures. Equilibrium magnetic field, defined from the critical magnetic fields of the metamagnetic evidence in the magnetization curves, exhibits almost constant below about 100 K, suggesting that the entropy change becomes zero, which is considered to cause kinetic arrest behavior. 相似文献
The solidification of hydroxyapatite (HA:Ca10(PO4)6(OH)2) and its bonding with Magnesium (Mg) alloys (AZ31; Mg–3Al–1Zn) were achieved simultaneously by using a hydrothermal hot-pressing method at a low temperature as low as 150 °C with no special surface treatment of Mg alloy. A mixture of calcium hydrogen phosphate dihydrate and calcium hydroxide was used as a starting powder material for solidifying HA. 3-point bending tests were conducted to obtain an estimate of the fracture toughness for the HA/Mg interface as well as for the HA ceramics only. The fracture toughness tests showed that the induced crack from the pre-crack tip deviated from the HA/Mg interface and propagated into the HA. The fracture toughness determined on the bonded HA/Mg specimen was close to that of the HA ceramics only (0.30 MPam1/2). 相似文献
The effect of water concentration on the foaming tendency of lubricating oil containing the detergent additives Ca-phenate and amide was investigated from a surface chemical standpoint. Foam volume, dynamic surface tension and surface viscosity were measured at various water concentrations. It was proved that the increase of surface viscosity with water content was the main factor affecting foaming in the case of Ca-phenate but, in contrast, the Marangoni effect played an essential role in the case of amide. 相似文献
We describe an interferometer system that uses two separate wavelengths to measure step height. The overlapping interference images detected by a CCD camera are easily separated by an ordinary integrating-bucket method and time-sharing sinusoidal phase modulation, in which two laser diodes are alternately modulated with a sinusoidal signal. A phase map is obtained only for the laser diode into which the modulation signal is injected. In this instance, a 1-microm step height was accurately detected. 相似文献
A surface profiler that incorporates a feedback controller to eliminate external disturbances is proposed and demonstrated. Its overall performance is dependent on the frequency response of the feedback loop. The frequency of the modulating signal strongly influences the response of the feedback controller. When we used the integrating-bucket method, the CCD camera had to be operated at a low-frequency video rate. Our technique uses a CCD camera equipped with an electronic shutter. The shutter function enables us to apply high-speed sinusoidal phase modulation to the conventional integrating-bucket method under the standard video rate. 相似文献
We carried out the growth of highly strained GaInAs-GaAs quantum wells (QWs) on a patterned substrate for extending emission wavelength on a GaAs substrate. We examined the shift of photoluminescence wavelength of the QWs and showed a large wavelength shift due to the spatial modulation in well thickness and indium composition. We demonstrated a single-mode multiple-wavelength vertical-cavity surface-emitting laser (VCSEL) array on a patterned GaAs substrate covering a new wavelength window of 1.1-1.2 /spl mu/m. By optimizing pattern shape, we achieved multiple-wavelength operation with widely and precisely controlled lasing wavelengths. The maximum lasing span is as large as 77 nm. We carried out a data transmission experiment through 5-km of single-mode fiber with a 2.5 Gb/s/channel. The total throughput reaches 10 Gb/s. The VCSEL-based wavelength-division-multiplexing (WDM) source would be a good candidate for WDM-LAN beyond 10 Gb/s. 相似文献
To control the electric polarisation of output light in surface emitting (SE) lasers, the stress effect on the resonance model of SE lasers with an elliptical holed region is investigated. For the first time, polarisation switching by external stress has been observed and the relation between the polarisation characteristics and the structural dependence on stress clarified.<> 相似文献
From the aspects of economical competitiveness, proliferation resistance, and minimizing waste problems, PNC has proposed an improved recycle concept for the FBR fuel cycle, termed Advanced Fuel Recycle System. Reprocessing in this system is based on the well-known PUREX flowsheet and features a “single cycle Pu/U co-extraction flowsheet” with lower decontamination factor (DF) than that in the conventional process. This feature is practical because of the FBR's low neutronic sensitivity to impurities.
Such a simplified extraction process without purification cycles should substantially reduce not only the number of process components but also the quantities of liquid to be treated in other related processes, so it will lead to the proportional reduction in waste processing, waste itself, and all other related equipments and facilities. This should improve overall economics. One method being examined to further reduce the liquid throughputs and simplify the process is to apply the crystallization technique to dissolver solution.
Overall, with this proposed concept, proliferation resistance will be significantly improved because plutonium is always recovered as a mixture with the uranium and DF of the plutonium product is low.
Reprocessing and fabrication processes are integrated into one fuel cycle plant in this system further contributing to these improvements. 相似文献