Effect of surface properties of silica nanoparticles on their cytotoxicity and cellular distribution in murine macrophages

In this study, complexes composed of poly-l-tyrosine (pLT) and single-walled carbon nanotubes (SWCNTs) were produced and the dispersibility of the pLT/SWCNT complexes in water by measuring the ζ potential of the complexes and the turbidity of the solution were investigated. It is found that the absolute value of the ζ potential of the pLT/SWCNT complexes is as high as that of SWCNTs modified with double-stranded DNA (dsDNA) and that the complexes remain stably dispersed in the water at least for two weeks. Thermogravimetry analysis (TGA) and visualization of the surface structures of pLT/SWCNT complexes using an atomic force microscope (AFM) were also carried out.     

Toughening of cyanate ester resin by N‐phenylmaleimide–N‐(p‐hydroxy)phenyl‐maleimide–styrene terpolymers and their hybrid modifiers

N‐Phenylmaleimide–N‐(p‐hydroxy)phenylmaleimide–styrene terpolymer (HPMS), carrying reactive p‐hydroxyphenyl groups, was prepared and used to improve the toughness of cyanate ester resins. Hybrid modifiers composed of N‐phenylmaleimide–styrene copolymer (PMS) and HPMS were also examined for further improvement in toughness. Balanced properties of the modified resins were obtained by using the hybrid modifiers. The morphology of the modified resins depends on HPMS structure, molecular weight and content, and hybrid modifier compositions. The most effective modification of the cyanate ester resin was attained because of the co‐continuous phase structure of the modified resin. Inclusion of the modifier composed of 10 wt% PMS (M_w 136 000 g mol^?1) and 2.5 wt% HPMS (hydroxyphenyl unit 3 mol%, M_w 15 500 g mol^?1) led to 135% increase in the fracture toughness (K_IC) for the modified resin with a slight loss of flexural strength and retention of flexural modulus and glass transition temperature, compared with the values for the unmodified resin. Furthermore, the effect of the curing conditions on the mechanical and thermal properties of the modified resins was examined. The toughening mechanism is discussed in terms of the morphological and dynamic viscoelastic behaviour of the modified cyanate ester resin system. © 2001 Society of Chemical Industry     

Poly(N‐isopropylacrylamide) gel‐based macroporous monolith for continuous‐flow recovery of palladium(II) ions

Macroporous monoliths, composed of thermoresponsive, tertiary‐aminated, and crosslinking monomers, were prepared for continuous‐flow separation of palladium(II) ions. N ‐Isopropylacrylamide was required to form the porous structure in the monoliths, indicating that the mechanism of porous structure formation involved polymerization‐induced phase separation of the poly(N ‐isopropylacrylamide) gel. Tertiary‐aminated monoliths showed adsorption selectivity for palladium(II) ions in hydrochloric media, compared with copper(II) ions. The maximum capacities of the monoliths with tertiary amine contents of 10, 20, 30, and 70 mol % for palladium(II) ions were 0.6, 1.1, 1.3, and 2.3 mmol/g, respectively. Darcy's permeabilities of water through the macroporous monolith were 10^?14 to 10^?13 m², and those were comparable to that through a commercially available membrane filter with a pore size of several micrometers. In the continuous‐flow process, the macroporous monolith with tertiary amine selectively adsorbed palladium(II) ions in the coexistence of copper(II) ions with 10 times higher concentration than the palladium(II) ions. The palladium(II) ions were eluted from the macroporous monolith, and the concentration of palladium(II) ions in the eluate was up to 45 times of that in the feed solution. The average enrichment factor and total recovery percentage of palladium(II) ions were 8.7 times and 95%, respectively. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44385.     

Measurement of self-diffusion coefficients in Li ionic conductors by using the short-lived radiotracer of 8Li

For the effective use of short-lived radioactive beams, soon to be available at the Tokai Radioactive Ion Accelerator Complex, the authors have developed a radiotracer method for diffusion studies in solids. The experimental test was performed by the measurement of the diffusion coefficients of Li in a sample of the compound βLiAl using an α-emitting radiotracer of ⁸Li (T_1/2=0.84 s). It was found that the time-dependent yields of the α particles from the diffusing ⁸Li that was initially implanted in the sample could be used as a measure of the diffusivity of the tracer in a nondestructive way. The method was applied to measure the self-diffusion coefficients of Li in βLiGa, and for investigating how the Li diffusion in the Li ionic conductors is affected by the concentration of atomic defects (i.e., the existence of the atomic vacancies of Li and the defects in Ga sites that are replaced by Li).     

Effect of Oxygen on the Self-formation of Carbonaceous Tribo-layer with Carbon Nitride Coatings under a Nitrogen Atmosphere

The ball-on-disk friction and wear tests of CN _X coatings (CN _X /CN _X ) were conducted under a nitrogen atmosphere with controlled relative humidity (RH) (3.4–40.0%RH) and oxygen concentration (100–21 × 10⁴ ppm) in this study. We found that the specific wear rate of CN _X coating on ball (W _b), which could give stable and low friction coefficient (<0.05), was below 3.0 × 10^?8 mm³/Nm. Average friction coefficients (µ _a) and W _b of CN _X /CN _X increased (µ _a: 0.02–0.33, W _b: 1.6 × 10^?8–2.4 × 10^?7 mm³/Nm) with increasing oxygen concentration (230–211,000 ppm) as well as RH (4.7–21.1%RH) under a nitrogen atmosphere. However, the W _b remained low value below 2.3 × 10^?8 mm³/Nm regardless of oxygen concentration (100–207,000 ppm) of a nitrogen atmosphere (3.4–3.9%RH) when CN _X -coated balls were slid against a hydrogenated CN _X (CN _X :H) coatings (CN _X /CN _X :H). Besides, the CN _X /CN _X :H achieved low and stable friction coefficient below 0.05 under a nitrogen atmosphere (10,000 ppmO₂) regardless of increasing RH up to 20%RH. Raman analysis indicated that the structure of carbon on the top surface of CN _X coating was changed from as-deposited CN _X coating in the case of low friction coefficient (<0.05). Furthermore, TOF-SIMS analysis provided the evidence that the carbon derived from CN _X -coated disk was considered to diffuse into the ball surface, and it mixed with the carbon derived from CN _X -coated ball on the wear scar, which formed the chemically bonded carbon tribo-layer. Low friction coefficient (<0.05) with CN _X coatings under a nitrogen atmosphere was achieved due to self-formation of the carbon tribo-layer.     

Chemical Removal of CeO2 Segregated on the Surface of CeO2–ZrO2 Binary Oxides for Improvement of OSC

A chemical treatment to remove residual CeO₂ phase on CeO₂–ZrO₂ (CZ) solid solution was carried out. A CZ was treated by H₂O₂ for the reduction of Ce⁴⁺ to Ce³⁺ and then HNO₃ for the dissolution of Ce³⁺ compounds (H–CZ). H₂-TPR, TEM-EDX and XPS analyses revealed the removal of CeO₂ phase and the homogeneous distribution of Ce species. About 20% improvement in oxygen storage capacity (OSC) of H–CZ was confirmed at 773 K by the weight measurements under H₂/N₂ and air atmospheres, indicating that the HNO₃/H₂O₂ treatment was effective to avoid the deterioration of the OSC by segregated CeO₂ on the CZ binary oxides.     

Molecular modeling of single polypeptide chain of calcium-binding protein p26olf from dimeric S100B()

P26olf from olfactory tissue of frog, which may be involvedin olfactory transduction or adaptation, is a Ca²⁺-binding proteinwith 217 amino acids. The p26olf molecule contains two homologousparts consisting of the N-terminal half with amino acids 1–109and the C-terminal half with amino acids 110–217. Eachhalf resembles S100 protein with about 100 amino acids and containstwo helix–loop–helix Ca²⁺-binding structural motifsknown as EF-hands: a normal EF-hand at the C-terminus and apseudo EF-hand at the N-terminus. Multiple alignment of thetwo S100-like domains of p26olf with 18 S100 proteins indicatedthat the C-terminal putative EF-hand of each domain containsa four-residue insertion when compared with the typical EF-handmotifs in the S100 protein, while the N-terminal EF-hand ishomologous to its pseudo EF-hand. We constructed a three-dimensionalmodel of the p26olf molecule based on results of the multiplealignment and NMR structures of dimeric S100B(ßß)in the Ca²⁺-free state. The predicted structure of the p26olfsingle polypeptide chain satisfactorily adopts a folding patternremarkably similar to dimeric S100B(ßß). Each domainof p26olf consists of a unicornate-type four-helix bundle andthey interact with each other in an antiparallel manner formingan X-type four-helix bundle between the two domains. The twoS100-like domains of p26olf are linked by a loop with no sterichindrance, suggesting that this loop might play an importantrole in the function of p26olf. The circular dichroism spectraldata support the predicted structure of p26olf and indicatethat Ca²⁺-dependent conformational changes occur. Since theC-terminal putative EF-hand of each domain fully keeps the helix–loop–helixmotif having a longer Ca²⁺-binding loop, regardless of the four-residueinsertion, we propose that it is a new, novel EF-hand, althoughit is unclear whether this EF-hand binds Ca²⁺. P26olf is a newmember of the S100 protein family.     

Deposition and structural analyses of molybdenum-disulfide (MoS2)–amorphous hydrogenated carbon (a-C:H) composite coatings

In this study we developed composite coatings consisting of amorphous hydrogenated carbon (a-C:H) and molybdenum-disulfide (MoS₂), and clarified their microstructure. In addition, we interpreted the tribological properties of the composite coatings in the viewpoint of a deposition-induced microstructural modification. The coatings were produced by the hybrid deposition technique of RF-generated methane and argon plasma and DC magnetron co-sputtering of MoS₂ target. The deposition parameter investigated in this study was methane flow rate. Structural analyses were performed using a transmission electron microscope (TEM) and an atomic force microscope (AFM). Friction tests were conducted using a ball-on-disk type tribometer. From an electron micrograph, it was confirmed that nano-clusters were embedded into an amorphous carbon host matrix. Surface roughness of the composite coating was ～ 0.25 nm in R_a compared to 5.0 nm in R_a of sputtered MoS₂. The concentration measurements were performed, and the results show that the sulfur and molybdenum concentration ratio, [S]/[Mo], is ～ 0.9, which indicates that the amount of sulfur was reduced due to the discharged plasma. In friction tests, composite coatings showed high friction in a vacuum condition. It was considered that lubricant MoS₂ lamellar structures showing super-low friction in a vacuum condition during friction could not be formed between ball and coating during friction because of the lack of sulfur in embedded clusters.