Fabrication of a polymer-coated silver hollow optical fiber with high performance

The techniques for fabricating a hollow optical fiber with an inner silver layer and a cyclic olefin polymer (COP) layer have been improved to reduce the surface roughness of these two layers. The loss spectrum was thereby drastically reduced over a wide wavelength range, from visible to near infrared. Optimization of the COP layer thickness resulted in low loss simultaneously at several key laser wavelengths. Infrared hollow fiber with low loss was developed for Er:YAG and Nd:YAG lasers. It can also deliver green and red pilot beams with low loss. Use of this fiber in therapeutic and pilot lasers should prove useful for research and development in laser medicine.     

Phase diagram calculations of ZrO2-based ceramics with an emphasis on the reduction/oxidation equilibria of cerium ions in the ZrO2-YO1.5-CeO2-CeO1.5 system

Phase diagram calculations that were made previously for the ZrO₂-MO _m/2 (m = 2, 3, 4) systems and for the ZrO₂-YO_1.5-MO _m/2 (M = transition metals) systems have been extended to the ZrO₂-YO_1.5-CeO₂(-CeO_1.5) system to make an attempt to explain (1) thermogravimetric (TG) results as a function of oxygen potential, (2) electronic conductivity as a function of oxygen potential, and (3) a miscibility gap observed in air. The interaction parameters for the CeO₂-CeO_1.5-YO_1.5 system were obtained from the reported oxygen nonstoichiometry in CeO_2−x and rate earth doped ceria, (Ce,RE)O_2−δ . The interaction parameters for the ZrO₂-CeO₂ subsystem were obtained so as to reproduce the observed miscibility gap at 1273 K. Those thermodynamic properties can reproduce consistently the experimental behaviors of the electronic conductivity and the TG results in the (Zr_1−x Ce _x )_0.8Y_0.2O_1.9 solid solutions; these indicate the enhancement of reduction of CeO₂.     

Effect of Pore–Grain-Boundary Interactions on Discontinuous Grain Growth

Pore behavior as influenced by migration of an abnormal grain boundary was studied. The pore behavior during the discontinuous growth of hot-pressed spinel (MgAl₂O₄) — whether the pore can move attached to the grain boundary — is particularly governed by the pore size and the matrix grain size. These phenomena can be understood from the interaction between the pore and the abnormal grain boundary.     

Synthesis of 2-alkyloyl-1,4,3,6-dianhydrosorbitol-5-sulfates and evaluation of the surface active properties

New anionic surfactants 2-alkyloyl-1,4,3,6-dianhydrosorbitol-5-sulfates were synthesized by sulfation of 2-alkyloyl-1,4,3,6-dianhydrosorbitol. Studies on the surface active properties such as surface tension, dispersibility and emulsifiability of these surfactants were carried out. The results showed these surfactants are better dispersants and emulsifiers than Span 80 and Span 85.     

Controller design of desktop-size NC machine tool with multi-application function

In this paper, a desktop-size NC machine tool is first presented to have multi-application function, such as 3D-machining modes with and without handling a machining force, and profiling-control modes with and without using stick-slip motion. The NC machine tool consists of three single-axis devices with a high resolution of 1???m in position. A ball end mill called router bit or a thin wood-stick tool can be attached to the tip of the z-axis. The proposed machine tool realizes compliant motion required for the profiling control along a desired trajectory. The profiling-control mode can be applied to the lapping process of a metallic LED lens cavity. Next, a control strategy with fine stick-slip motion is further added to the profiling-control system to improve the lapping performance. The fine stick-slip motion is generated orthogonally to the direction of the tool movement. Generally, the stick-slip motion is an undesirable phenomenon to be eliminated in precision machineries. However, the proposed machine tool employs the fine stick-slip motion to partly regulate slight finishing energy. The effectiveness of the machine tool is demonstrated through an actual machining test of a wood material and a lapping test of a metallic LED lens cavity.     

Nuclear data sensitivity/uncertainty analysis for XT-ADS

The XT-ADS, an accelerator-driven system for an experimental demonstration, has been investigated in the framework of IP EUROTRANS FP6 project. In this study, the sensitivity and uncertainty analyses were performed to comprehend the reliability of the XT-ADS neutronic design.     

Evaluating the protective effects of radon inhalation or ascorbic acid treatment after transient global cerebral ischemic injury in gerbils

In this study, we compared the protective effects of radon inhalation and ascorbic acid administration on transient global cerebral ischemic injury in gerbils. Gerbils were treated with radon inhalation (2000 Bq/m³, 24 hours) or ascorbic acid (100, 300, or 500 mg/kg body weight). Then, transient global cerebral ischemia was induced by bilateral occlusion of the common carotid artery. Results showed that the number of damaged neurons was significantly increased in gerbils that underwent ischemia compared with that in control gerbils. However, the number of damaged neurons in gerbils treated with radon or 500 mg/kg of ascorbic acid before ischemia was significantly lower than gerbils who were subjected to ischemia without any pretreatment, and the protective effects of radon inhalation were similar to the effects of administering 500 mg/kg ascorbic acid. The levels of superoxide dismutase (SOD) and total glutathione (t-GSH) in brain tissue were increased to a similar extent by pretreatment with radon inhalation or 500 mg/kg of ascorbic acid. These findings suggested that radon inhalation has a protective antioxidative effect against transient global cerebral ischemic injury similar to 500 mg/kg ascorbic acid treatment.     

Chemical Removal of CeO2 Segregated on the Surface of CeO2–ZrO2 Binary Oxides for Improvement of OSC

A chemical treatment to remove residual CeO₂ phase on CeO₂–ZrO₂ (CZ) solid solution was carried out. A CZ was treated by H₂O₂ for the reduction of Ce⁴⁺ to Ce³⁺ and then HNO₃ for the dissolution of Ce³⁺ compounds (H–CZ). H₂-TPR, TEM-EDX and XPS analyses revealed the removal of CeO₂ phase and the homogeneous distribution of Ce species. About 20% improvement in oxygen storage capacity (OSC) of H–CZ was confirmed at 773 K by the weight measurements under H₂/N₂ and air atmospheres, indicating that the HNO₃/H₂O₂ treatment was effective to avoid the deterioration of the OSC by segregated CeO₂ on the CZ binary oxides.     

Accumulation of triosephosphate isomerase, with sequence homology to Beta amyloid peptides, in vessel walls of the newborn piglet hippocampus

We investigated whether beta-amyloid (Abeta)-like immunoreactivity was seen in the brains of newborn piglets. The immunoreactivity for Abeta(1-42) and Abeta(1-40) proteins, but not Abeta precursor protein, was present in CD68-positive perivascular cells of the hippocampus and in parts of the meninges. It was colocalized with immunoreactivity for receptor for advanced glycation end product and tumor necrosis factor-alpha. The protein with a molecular mass of 27 kDa, which was recognized by the Abeta antibodies, was identified as triosephosphate isomerase (TPI) with sequence homology to Abeta peptides by N-terminal amino acid sequencing, mass fingerprint analysis using matrix-associated laser desorption/ionization mass spectrometry, and Western blotting. Western blotting assay also revealed that detectable expression of Abeta proteins were not seen in the piglet brains. These findings indicate that TPI with sequence homology to Abeta peptides accumulates in perivascular cells of the microglia/macrophage lineage located around arterial vessels of the newborn piglet hippocampus.