Nuclear data sensitivity/uncertainty analysis for XT-ADS

The XT-ADS, an accelerator-driven system for an experimental demonstration, has been investigated in the framework of IP EUROTRANS FP6 project. In this study, the sensitivity and uncertainty analyses were performed to comprehend the reliability of the XT-ADS neutronic design.     

Development of water pipe cooling system for power cables intunnels

A full-size test line was constructed to study the water pipe cooling system for a bulk-power transmission line installed in a tunnel. Based on the test data and their analysis, a technique for designing the system has been established. The results have indicated an effective layout of the cooling pipes in the tunnel, and have validated the accuracy of the computer models to determine thermal characteristics of the tunnel system. An efficient control method to operate the cooling system according to the load changes of the cables was developed. The chosen layout is shown to be more effective than the dispersed layout because it accelerates the air convection and makes the air temperature more uniform. Furthermore, the thermal convection resistance between the tunnel wall and the air is reduced. It was also verified that the air temperature distribution along the vertical shaft could be predicted by thermal convection analysis. This cooling system is scheduled to be applied to a 154 kV power cable line in 1990     

Long-term results of Watson-Jones tenodesis of the ankle. Clinical and radiographic findings after ten to eighteen years of follow-up

Thirty-seven chronically unstable ankles in thirty-six patients were operated on with use of a Watson-Jones tenodesis. Thirty-four ankles (thirty-three patients) were followed for a mean duration of thirteen years and eight months (range, ten to eighteen years) after the operation. There were nine male and twenty-four female patients. The mean age of the patients was thirty-one years (range, fourteen to fifty-seven years) at the time of the operation and forty-four years (range, twenty-eight to seventy years) at the time of the latest follow-up. At the time of the most recent follow-up evaluation, twenty-seven patients (twenty-eight ankles) were examined directly by one of us and twenty-five patients (twenty-six ankles) also were evaluated radiographically. The other six patients were interviewed, with use of a questionnaire, by telephone. Of the thirty-four ankles, nineteen had an excellent result (grade 1), eleven had a good result (grade 2), three had a fair result (grade 3), and one had a poor result (grade 4) according to the rating system of Good et al. The mean score (and standard deviation) on the ankle-hindfoot scale of the American Orthopaedic Foot and Ankle Society for the twenty-eight ankles that were examined directly by one of us was 90 +/- 9.3 points (range, 68 to 100 points). Progression of an exostosis at the edge of the joint was detected in eighteen (69 percent) of the twenty-six ankles that were examined radiographically, but narrowing of the joint space was not seen in any ankle. No relationship was detected between the clinical results and radiographic osteoarthrotic changes or the duration of follow-up. The results did not deteriorate over the long term.     

Low resistivity transparent conducting Al-doped ZnO films prepared by pulsed laser deposition

A series of AZO films were grown on glass substrates by a method of pulsed laser deposition using a split target divided into AZO (Al₂O₃: 1 wt.%) and AZO (Al₂O₃: 2 wt.%). The film deposition took place at a substrate temperature of 230 °C within a magnetic field applied perpendicularly to the plume. To suppress the droplet generation caused by the intense laser energy, the laser energy density was reduced to 0.75 J/cm² (15 mJ). For an approximately 280-nm thick-AZO film grown at a target-to-substrate distance of 25 mm, we obtained the lowest resistivity of 8.54×10⁻⁵ Ω·cm and an average transmittance of more than 88% in the visible range. In the cross-sectional TEM observation and XRD spectra, the regularity in the crystal growth was generated immediately from the interface between the substrate and the film.     

Studies on chitin. VI. Binding of metal cations

The adsorption abilities of chitin and its congeners with two series of degrees of deacetylation prepared by two different deacetylation procedures were compared. Among the polysaccharides obtained by the heterogeneous method, those with higher amino group content had higher adsorption ability. Plots of collection percentages versus amino group content, however, did not give straight lines. The plot for the chelation on the congeners that were prepared by homogeneous hydrolysis had a maximum at about 50% amino group content, and the value was higher than that for the sample with the highest amino group content, which was prepared by heterogeneous hydrolysis. These results suggest that the polysaccharides with about 50% amino group content obtained by the homogeneous procedure are potentially useful for the removal of metals.     

EFFECT OF BAFFLE ON TRAY UNDER OSCILLATING CONDITION

Effect of baffle on a tray under oscillating conditions has been examined experimentally. To reduce the degree of liquid mixing and liquid channeling under oscillating conditions, it is necessary to install the baffles on tray.

Experiments were conducted with the air-water system, ft was found that the pressure drop change can be expressed as a sinusoidal function and the period coincides with tray oscillation. The degree of liquid mixing decreases when the baffles are installed on tray and it also decreases with the increase of liquid flow rate. The pressure drop increases with the installation of baffle on tray.

The suitable baffle number on tray is from 4 to 8 and in this region, the degree of liquid mixing reaches minimum and the liquid holdup takes a maximum value. @KEYWORDS: Tray, Oscillating, Liquid mixing, Baffle, Pressure drop, Liquid holdup.     

Emissivity of chlorinated polyethylene

The emissivity of chlorinated polyethylene containing varying amounts of combined chlorine has been investigated. It was found that the emissivity of these compounds increases significantly with increase in chlorination.     

Aging and thermal stability of Mg/SiC and Mg/Y2O3 reflection multilayers in the 25-35 nm region

Reflection measurements in the 25-35 nm region were made for Mg/SiC and Mg/Y2O3 multilayers kept in a low-humidity atmosphere for 4 or 5 years. Aged Mg/SiC multilayers keep their reflectances, and the reflectance value at 31.2 nm is 0.44 at 10 degrees of the normal angle of incidence. Aged Mg/Y2O3 multilayers change reflectance as top layer materials, and the best value at 30.1 nm is 0.40 at 10 degrees. Reflection measurements are also made for Mg-based multilayers that are annealed from room temperature to 400 degrees C at 50 degrees C intervals. Both multilayers keep their reflectance at annealing temperatures of 200 degrees C. These results suggest that both Mg-based multilayers can be applied to practical optics.     

An analysis of the spillover effects based on patents and inter-industrial transactions for an emerging blockchain technology

Scientometrics - A simple and robust approach to predict the spillover effects of emerging technologies enables proper formulation of investment strategies. In this study, we propose the method in...     

Theoretical study of the adsorption of Cs,Cs+, I,I−, and CsI on C60 fullerene

Theoretical investigation for the adsorption of the cesium atom (Cs), the cesium iodide molecule (CsI), the iodine atom (I), the cesium cation (Cs⁺), and the iodide anion (I^?) onto the surface of a single fullerene molecule (C₆₀) are reported. A hybrid exchange–correlation functional using the Coulomb-attenuating method (CAM-B3LYP) is employed. The adsorption energies, i.e., the opposite of enthalpy change through adsorption, are calculated to be 143, 12, 9, 46, and 49 kJ mol^?1 for Cs, CsI, I, Cs⁺, and I^?, respectively. The equilibrium constant for Cs is calculated to be 7×10³ atm^?1 at the temperature of 1000 K and is seven orders of magnitude higher than that for CsI, indicating that the C₆₀ molecule adsorb the Cs atom highly selectively against the CsI molecule.