Production of monodisperse water-in-oil emulsions consisting of highly uniform droplets using asymmetric straight-through microchannel arrays

This paper reports the production of monodisperse water-in-oil (W/O) emulsions using new microchannel emulsification (MCE) devices, asymmetric straight-through MC arrays that were hydrophobically modified. The silicon asymmetric straight-through MC arrays consisted of numerous pairs of microslots and circular microholes whose cross-sectional sizes were 10 μm. This paper primarily focused on investigating the effect of the osmotic pressure of a dispersed phase (Π_d) on MCE. This paper also investigated the effects of the type of continuous-phase oils and the dispersed-phase flux (J _d) on MCE. The dispersed phases were Milli-Q water and Milli-Q water solutions containing sodium chloride. The continuous phases were decane (as control), hexane, medium chain triacylglyceride (MCT), and refined soybean oil (RSO) solutions containing tetraglycerin monolaurate condensed ricinoleic acid ester (TGCR) as a surfactant. At Π_d of exceeding threshold, highly uniform aqueous droplets with coefficients of variation of less than 3% were stably generated via hydrophobic asymmetric straight-through MCs. Monodisperse W/O emulsions with average droplet diameters between 32 and 45 μm were produced using the alkane–oil and triglyceride–oil solutions as the continuous phase. This work also demonstrated that the hydrophobic asymmetric straight-through MC array had remarkable ability to produce highly uniform aqueous droplets at very high J _d of up to 1,200 L m⁻² h⁻¹.     

Superconductivity in the tetragonal phase of La1.9Bi0.1CuO4+δ annealed under high oxygen pressure

We have investigated the relation between the crystal structure and superconductivity in La_1.9Bi_0.1CuO₄₊ , in which the phase separation observed in La₂CuO₄₊ is suppressed. A phase diagram in theT– plane is given for La_1.9Bi_0.1CuO₄₊ with excess oxygen. For very small values, the crystal structure is orthorhombic, and an orthorhombic-tetragonal phase transition occurs markedly at 0.03 in the measured temperature range between 13 and 293 K. Superconductivity is observed in the range of 0.04<<0.11. This is clear evidence thathigh-T _c superconductivity also appears in the tetragonal phase.     

A low wall-loading DEMO reactor design with high priority for early and reliable realization of a tokamak fusion reactor over the cost performance

Based on scientific databases adopted for designing ITER plasmas and on the advancement of fusion nuclear technology from the recent R&D program, a low wall-loading DEMO fusion reactor has been designed, where high priority has been given to the early and reliable realization of a tokamak fusion plasma over the cost performance. Since the major radius of this DEMO reactor is chosen to be 10 m, plasma ignition is achievable with a low fusion power of 0.8 GW and an operation period of 4–5 hours is available only with inductive current drive. The low ignition power makes it possible to adopt a first wall with an austenitic stainless steel, for which significant databases and operating experience exists, due to its use in the presence of neutron irradiation in fission reactors. In step with development of advanced materials, a step-wise increase of the fusion power seems to be feasible and realistic, because this DEMO reactor has the potential to produce a fusion power of 5 GW.     

Revolving Vernier Mechanism Controls Size of Linear Homomultimer

A new kind of the Vernier mechanism that is able to control the size of linear assembly of DNA origami nanostructures is proposed. The mechanism is realized by mechanical design of DNA origami, which consists of a hollow cylinder and a rotatable shaft in it connected through the same scaffold. This nanostructure stacks with each other by the shape complementarity at its top and bottom surfaces of the cylinder, while the number of stacking is limited by twisting angle of the shaft. Experiments have shown that the size distribution of multimeric assembly of the origami depends on the twisting angle of the shaft; the average lengths of the multimer are decamer, hexamer, and tetramer for 0°, 10°, and 20° twist, respectively. In summary, it is possible to affect the number of polymerization by adjusting the precise shape and movability of a molecular structure.     

Deformation and Fracture of Micron‐Sized Metal‐Coated Polymer Spheres: An In Situ Study

In situ imaging and analysis of the mechanical behavior of micron‐sized metal‐coated polymer particles under compression is reported. A nanoindentation set‐up mounted in a scanning electron microscope is used to observe the deformation and fracture of 10 μm polymer spheres with Ni, Ni/Au, Au, and Ag coatings. The spheres fracture in one of two metallization‐dependent modes, brittle, and ductile, depending only on the presence of a nickel layer. The metal coating always fractures parallel to the direction of compression. The mechanical properties up to the point of coating fracture are rate‐dependent due to the viscoelastic polymer core. Metal‐coated polymer spheres are an important composite material in electronics packaging, and this study demonstrates a novel method of evaluating the mechanical properties of particles to tailor them for electronic materials.

     

Rank 2 proximal Cantor systems are residually scrambled

Downarowicz and Maass [7 T. Downarowicz and A. Maass, Finite-rank Bratteli–Vershik diagrams are expansive, Ergod. Th. Dynam. Sys. 28 (2008), pp. 739–747.[Web of Science ®] , [Google Scholar]] proposed topological ranks for all homeomorphic Cantor minimal dynamical systems using properly ordered Bratteli diagrams. In this study, we adopt this definition to the case of the essentially minimal zero-dimensional systems. We consider the cases in which topological ranks are 2 and unique minimal sets are fixed points. Akin and Kolyada [2 E. Akin and S. Kolyada, Li–Yorke sensitivity, Nonlinearity 16(4) (2003), pp. 1421–1433.[Crossref], [Web of Science ®] , [Google Scholar]], had shown that if the unique minimal set of an essentially minimal system is a fixed point, then the system must be proximal. The finite topological rank implies expansiveness; furthermore, in the case of proximal Cantor systems with topological rank 2, the expansiveness is always from the lowest degree. Rank 2 proximal Cantor systems are residually scrambled. We present a necessary and sufficient condition for the unique ergodicity of these systems. In addition, we show that the number of ergodic measures of the systems that are topologically mixing can be 1 and 2. Moreover, we present examples that are topologically weakly mixing, not topologically mixing, and uniquely ergodic. Finally, we show that the number of ergodic measures of the systems that are not weakly mixing can be 1 and 2.     

Phylogenetic analyses of the matrix and non-structural genes of equine influenza viruses

Matrix (M) and nonstructural (NS) genes of thirteen equine H3N8 and H7N7 influenza viruses were sequenced and analyzed from an evolutionary point of view. The M and NS genes of H3N8 viruses isolated between 1989 and 1993 evolved into two minor branch clusters, including isolates from Europe and the American continent, respectively. It was noteworthy to reveal that the nucleotide sequences of the M and NS genes of an earlier American strain showed highest homology to those of recent European viruses. "Frozen evolution" was observed in the M and NS genes of A/eq/LaPlata/1/88. It was also evident that the NS gene of an H7N7 virus from 1977 was very similar to that of a 1979-H3N8 virus, while the M gene was closest phylogenetically to that of the earliest H7N7 virus isolated in 1956. Furthermore, the M2 protein of A/eq/Newmarket/1/77 virus contained a carboxyl terminal deletion of three amino acids. The evolutionary rates of the M and NS genes of H3N8 equine influenza viruses were estimated to be 5.4 x 10(-4) and 5.1 x 10(-4) substitutions per site per year, respectively, which were slower than those of human viruses.     

Anisotropy in the resistive superconducting transition under magnetic fields in single crystal Pb2Sr2Ho0.5Ca0.5Cu3O8

Anisotropie properties of the single crystal Pb₂Sr₂Ho_0.5Ca_0.5Cu₃O₈ have been investigated by measuring the electrical resistivity in theab-planeρ _ab (H, θ,T), which depends on the angleθ between theab-plane and the magnetic-field direction, in various constant fieldsH perpendicular to the current direction. All the angle-dependent values ofρ _ab (H, θ,T) at a constant temperature are scaled to be on one curve as a function of reduced field. The anisotropic parameter γ≡(m _c ^* /m _ab ^* )^1/2 is estimated as 12–13, which is larger than that of YBa₂Cu₃O₇ and much smaller than that of Bi₂Sr₂CaCu₂O₈. It has been concluded that the anisotropy does not always depend on the thickness of the blocking layer but seems to depend on the overlap of the electronic wave functions along thec-axis. Anisotropy in the pinning potential has also been discussed from the resistive tail in the temperature dependence ofρ _ab (H,θ,T).     

Two complementary operations inspired by the DNA hairpin formation: Completion and reduction

We consider two complementary operations: Hairpin completion introduced in [D. Cheptea, C. Martin-Vide, V. Mitrana, A new operation on words suggested by DNA biochemistry: Hairpin completion, in: Proc. Transgressive Computing, 2006, pp. 216–228] with motivations coming from DNA biochemistry and hairpin reduction as the inverse operation of the hairpin completion. Both operations are viewed here as formal operations on words and languages. We settle the closure properties of the classes of regular and linear context-free languages under hairpin completion in comparison with hairpin reduction. While the class of linear context-free languages is exactly the weak-code image of the class of the hairpin completion of regular languages, rather surprisingly, the weak-code image of the class of the hairpin completion of linear context-free languages is a class of mildly context-sensitive languages. The closure properties with respect to the hairpin reduction of some time and space complexity classes are also studied. We show that the factors found in the general cases are not necessary for regular and context-free languages. This part of the paper completes the results given in the earlier paper, where a similar investigation was made for hairpin completion. Finally, we briefly discuss the iterated variants of these operations.     

Solving the irregular strip packing problem via guided local search for overlap minimization

The irregular strip-packing problem (ISP) requires a given set of non-convex polygons to be placed without overlap within a rectangular container having a fixed width and a variable length, which is to be minimized. As a core sub-problem to solve ISP, we consider an overlap minimization problem (OMP) whose objective is to place all polygons into a container with given width and length so that the total amount of overlap between polygons is made as small as possible. We propose to use directional penetration depths to measure the amount of overlap between a pair of polygons, and present an efficient algorithm to find a position with the minimum overlap for each polygon when it is translated in a specified direction. Based on this, we develop a local search algorithm for OMP that translates a polygon in horizontal and vertical directions alternately. Then we incorporate it in our algorithm for OMP, which is a variant of the guided local search algorithm. Computational results show that our algorithm improves the best-known values of some well-known benchmark instances.