Breeding of a high tyrosol‐producing sake yeast by isolation of an ethanol‐resistant mutant from a trp3 mutant

A novel breeding strategy for a high tyrosol‐producing sake yeast was developed by isolating an ethanol‐resistant mutant from a tryptophan auxotrophic mutant of a sake brewery yeast. Since tyrosol has antioxidant, cardioprotective and taste‐sharpening effects, increasing the tyrosol level of alcohol beverages could be beneficial in alcohol production. Since the transporters of aromatic amino acids are degraded by several stresses and mutants defective in the synthesis of aromatic amino acids are sensitive to ethanol, it was hypothesized that the degradation of these transporters should be inhibited in ethanol resistant mutants isolated from the auxotrophic mutants of aromatic amino acids, and that the uptake of aromatic amino acids would be increased in the mutants. Consistent with this hypothesis, sake was brewed with the ethanol‐resistant mutant of a tryptophan auxotrophic mutant and the sake was found to contain a lesser content of tyrosine and a higher content of tyrosol relative to the sake brewed with the parental strains. The taste of the sake brewed with the mutant strain could be discriminated from the sake brewed with the parental strains, probably because of the altered concentrations of tyrosol and certain amino acids and organic acids. The results suggest that combining the isolation of an ethanol‐resistant mutant and an auxotrophic mutant is an effective method to breed a brewing strain with a modified metabolism of these substances. Copyright © 2012 The Institute of Brewing & Distilling     

Consideration on the Relationship Between Dielectric Breakdown Voltage and Water Content in Fatty Acid Esters

Mineral oil is commonly used as an electrical insulating oil in transformers because of its relatively high electrical insulating ability and fluidity. Considering the depletion of resources and environmental problems, however, fatty acid esters synthesized from natural plant oils are attracting attention as an environmentally friendly insulating oil. In addition, fatty acid esters such as methyl octanoate, methyl dodecanoate, 2-ethylhexyl octanoate, and 2-ethylhexyl dodecanoate have high fluidity, and also show excellent moisture tolerance against dielectric breakdown compared to mineral oil. In the present study, to clarify the reason for the superior moisture tolerance of fatty acid esters, the status of dissolved water in esters is investigated with IR spectroscopic measurements and density functional theory (DFT) calculations. It is revealed that water molecules in fatty acid esters are trapped by the ester moiety of fatty acid esters. As a result, fatty acid esters have a higher moisture tolerance against dielectric breakdown than mineral oil.     

The hyperpolarization‐activated current regulates synchronization of gap–junction‐coupled dopaminergic neurons in the midbrain—a combined approach between computational modeling and electrophysiological recording

To examine the functional role of hyperpolarization‐activated and cyclic nucleotide‐gated (HCN) current observed in mesencephalic dopaminergic neurons, we constructed a conductance‐based model that can mimic the electrical properties obtained in electrophysiological recordings of rat brain slices. In the model, blocking the HCN current resulted in a reduction of spontaneous firing rate and a change in the properties of autonomous pacemaking. In addition, reduced one‐dimensional phase equations and their coupled oscillators were analyzed. The analysis indicated that HCN channels can regulate the extent of synchronization of coupled dopaminergic neurons through gap–junction connections. Thus, the HCN current can effectively shape the autonomous and cooperative firing of dopaminergic neurons in the midbrain. © 2012 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Evaluation of diagnostic results by Bayes' theorem

Application of Bayes' theorem for the evaluation of diagnostic results of electric facilities is described. A concept of risk assessment method based on the diagnosis results is proposed and the effects of various parameters on the risk are clarified. Based on these results, a rational renewal scheme using diagnostic results is proposed. In addition, the prior probability based on the data of actual facilities is investigated and it is found that the data available so far is insufficient and more data are required for the detailed analysis. © 2012 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Optical timing distribution system with femtosecond stability

Stable timing distribution is a key technology for the many fields that use timing signals for synchronization. The frequency of the timing signal depends on the field and multiple timing signals are sometimes required. In our DWDM‐based timing distribution system, phase deviation is detected by high‐speed round‐trip signal (10 GHz signal is used as this control signal). Fiber stretchers are controlled so as to minimize the phase deviation of the control signal. Multiple signals and the control signal are densely multiplexed and transmitted through the same stretchers. Therefore, the transmission of all signals is stabilized. This configuration provides a flexible platform for distributing various RF or microwave signals. As an example of arbitrary timing signals, a 1 GHz signal is transmitted over a length‐stabilized 400‐m fiber for more than 1 day. The recorded propagation time fluctuations are 10.4 and 2.8 fs rms for the 1 and 10 GHz signals, respectively. The Allan deviations are 2.7 × 10⁻¹⁹ (1 GHz) and 6.0 × 10⁻²⁰ (10 GHz) for the averaging time of 10⁵ s. © 2012 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

A multiscale simulation of polymer processing using parameter-based bridging in melt rheology

To investigate the effect of molecular structure on macroscopic flow behavior of polymeric liquid, attempts have been made to embed the microscopic information into the flow simulation. Constitutive equation based on the theory of polymer dynamics is ideal but the theory is still under development. The CONNFFESSIT approach (where microscopic simulation is embedded into calculation grid in macroscopic simulation) is another promising direction but the computational cost is not practical yet. In this study, we propose another simple method using parameter-based bridging where the parameters for phenomenological constitutive equations in macroscopic flow simulation are obtained from coarse-grained molecular simulation. As an example, we performed a simulation of injection molding and examined the effect of molecular weight on warpage of the molded product. We used the primitive chain network simulation to calculate linear viscoelasticity of linear monodispersed polystyrenes from molecular weight. The obtained linear viscoelasticity was converted into the relaxation spectrum and into the flow curve to be used in the macroscopic simulations. From the flow curve, the parameters of an inelastic non-Newtonian constitutive equation were obtained and used for the simulation of filling process. The relaxation spectrum was used to calculate residual stress from the flow profile in the filling process. From the residual stress and thermal shrinkage, warpage of the product was obtained. For the examined thin plate product, significant change in the warpage direction was demonstrated according to the molecular weight of the material. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Direct synthesis and melt‐drawing property of aramids by bulk polycondensation of isophthalic acid with m‐phenylenediamine and 3,4′‐oxydianiline

The direct polycondensation of isophthalic acid with a mixture of 1,3‐phenylenediamine (m‐PDA) and 3,4′‐diaminodiphenyl ether (3,4′‐ODA) could be successfully performed in the bulk to afford the expected co‐aramids for the first time. The co‐aramids with low molecular weights and 3,4′‐ODA contents higher than 50 mol% display excellent thermoplasticity and melt‐drawing property. Indeed, several meters long filaments with 12 μm diameter could be produced. In addition, the environmentally friendly method for the preparation of aramid materials as well as the demonstration of their filament formation will open up the new possibility to prepare aramid fibers. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Molecular weight dependence in a relaxation phenomenon at glassy state: Physical aging of polycarbonate

At the glassy state of polymers, the reptation-type molecular motion should be frozen-in and the relaxation should be only by local motions, such as rotation, vibration, and torsion. Such local motions would not depend on molecular weight. This may be current understanding of the polymer glass. By contrast, we found that the rate of enthalpy relaxation in polycarbonate at 100 °C (50 °C below T_g) clearly depends on molecular weight. Deterioration of impact strength was also found to depend on molecular weight. The surprising results are presented in this letter.     

Resistances to UV-C irradiation of Salmonella Typhimurium and Staphylococcus aureus in wet and dried suspensions on surface with egg residues

To clarify the effects of food sediments on ultraviolet-C (254 nm) sanitation in food-related environments, we examined the resistance of pathogenic bacteria (Salmonella Typhimurium and Staphylococcus aureus) cells, in wet and dried suspensions adhered with 1.5-15% w/v egg albumen, 1.5-15% yolk or 3.0-30% whole egg solutions, against UV-C irradiation. Bacterial suspensions (0.1 ml of 8 log CFU/ml) were put on 47 mmφ glass dishes and dried at room temperature (20-24 °C) for 180 min in a bio safety cabinet with ventilation. Viable S. Typhimurium and S. aureus cells in distilled water decreased during the drying period from 7.2 to 3.2 and from 8.0 to 6.5 log CFU/dish, respectively,. On the other hand, the bacteria cells were protected from drying by egg compounds, even by the lowest concentration. The UV-C treatment (0.16 mW/cm² for 10 min) showed a clear bactericidal effect in the absence of egg compounds. However, the bactericidal effect was inhibited by 15% yolk and 30% whole egg. Results in this study suggested that the small food sediment protect bacteria on the surfaces from dryness and UV-C irradiation and it might introduce cross contamination.     

Possible action of vasohibin-1 as an inhibitor in the regulation of vascularization of the bovine corpus luteum

The development of the corpus luteum (CL), which secretes large amounts of progesterone to establish pregnancy, is accompanied by active angiogenesis, vascularization, and lymphangiogenesis. Negative feedback regulation is a critical physiological mechanism. Vasohibin-1 (VASH1) was recently discovered as a novel endothelium-derived negative feedback regulator of vascularization. We therefore investigated the expression of VASH1 in the bovine CL. Expression of VASH1 mRNA and protein was predominantly localized to luteal endothelial cells (LECs). VASH1 expression in the CL was constant through the early to late luteal phases and decreased during CL regression relating with the action of luteolytic prostaglandin F(2)(α) in vivo. To investigate the role of VASH1, we determined whether VASH1 treatment affects angiogenesis and/or lymphangiogenesis using LECs and lymphatic endothelial cells (LyECs) in vitro. Vascular endothelial growth factor A (VEGFA) stimulated the expression of VASH1 in LECs but not in LyECs, and VASH1 completely blocked VEGFA-induced formation of capillary-like tube structures of LECs and LyECs in vitro. In summary, VASH1 is predominantly located on LECs in the bovine CL and inhibits the angiogenic and lymphangiogenic actions of VEGFA. Bovine CL therefore has a VEGFA-VASH1 system that may be involved in regulation of luteal function, especially in the development of the CL. The results indicate that VASH1 has the potential to act as a negative feedback regulator of angiogenesis and lymphangiogenesis in the CL in cows.