An image analyzing system using an artificial neural network forevaluating the parenchymal echo pattern of cirrhotic liver and chronichepatitis

To objectively evaluate the parenchymal echo pattern of cirrhotic liver and chronic hepatitis, the authors applied an image analyzing system (IAS) using a neural network. Autopsy specimens in a water tank (n=13) were used to examine the relationship between the diameter of the regenerative nodule and the coarse score (CS) calculated by IAS. CS was significantly correlated with the diameter of the regenerative nodule (p<0.0001, r=0.966). CS is considered to be useful for evaluating the coarseness of the parenchymal echo pattern     

Mechanical alloying in the Al-Bi alloy system

Mechanical alloying (MA) was carried out to investigate the MA behaviour of the immiscible Al-10, 30 at % Bi alloys. After the MA processing, the Al and Bi were finely and homogeneously alloyed. The Bi crystallite size decreased to 25 nm and 30 nm in the Al-10 at % Bi and Al-30 at % Bi alloys, respectively. By increasing the MA time, the hardness increased up to a value of 80 H _v, which is larger than that obtained from the rule of mixtures. The lattice parameter of Bi decreased by about 0.27%, which shows the formation of a non-equilibrium hcp Bi super-saturated solid solution. The extended solubility of Al in Bi was 1.9% in the Al-30 at % Bi alloy. Due to the extended solubility, depression of the melting temperature of hcp Bi was confirmed in the mechanically alloyed Al-Bi alloys. The maximum depression in the temperature was about 10 K. The measured values corresponded well with those estimated from the extrapolation of the solidus line.     

Soft-decision Viterbi decoding with diversity combining formulti-beam mobile satellite communication systems

Diversity combining methods for mobile satellite communication systems employing convolutional encoding and soft-decision Viterbi decoding are evaluated. Computer simulation clarifies that the pre-Viterbi-decoding maximal ratio combining method has better performance than other methods in Rician fading channels. The simulation results agree with the Pe (bit error probability) performance derived from the numerical analysis for slow fading using the approximate Pe performance of Viterbi decoding in AWGN (additive white Gaussian noise) channels and the probability density function of Rician fading. Applying this diversity method to the multi-beam mobile satellite communication systems, a satellite beam diversity reception scheme is proposed. A computer simulation result shows that the proposed scheme decreases the packet error rate of the control signals to less than 1/100 around the satellite beam boundary     

Solid-Phase Syntheses of Two Deacetyl-Thymosin β4 Analogues with Substitution at Position 12 and Their Effects on Impaired Blastogenic Response of T Lymphocytes of Uremic Patients

Two deacetyl-thymosin β₄ analogues containing Phe(4Br) or D-Phe(4Br) as position 12 were synthesized by the manual solid-phase method, and their immunological effects on the impaired blastogenic response of phytohemagglutinin-stimulated T lymphocytes of uremic patients with infectious diseases were studied. Bromination of the p-position of Phe¹² resulted in a marked restorative effect on the impaired blastogenic response of T lympocytes compared with that of our synthetic deacetyl-thymosin β₄ The synthetic [Phe(4Br)¹²]deacetyl-thymsin β₄ was approximately equal in potency to our synthetic [Phe(4F)¹²]deacetyl-thymosin β₄ in uremic patients, but the other analogue, [D-Phe(4Br)¹²]deacetyl-thymosin β₄, had no effect.     

Effects of nondensifying inclusions on the densification and microstructure of zinc oxide matrix composites

The densification and microstructure development of ZnO containing Zn₇Sb₂O₁₂, ZrO₂, and aggregated ZnO were investigated to elucidate the effect of nondensifying inclusions on the sintering of ceramic/ceramic composites. The inclusion retarded the densification, and the degree of retardation was found to depend on the chemical species of inclusion; Zn₇Sb₂O₁₂ had the largest effect, followed by ZrO₂ and then aggregated ZnO last. The experimental results for aggregated ZnO was explained by the theory which predicts the generation of backstresses. The backstresses give a less significant effect on the densification. For Zn₇Sb₂O₁₂ and ZrO₂, the microstructure of the matrix varied with distance from an inclusion particle; much porosity was observed in the region surrounding the inclusion. Circumferential voids, which are responsible for the suppression of densification, form during the initial stage of sintering. Inclusion particles generate an anchoring effect which retards the densification of the matrix immediately surrounding the inclusion particle during the intermediate stage.Supported by the Inamori Foundation.     

Relationship between the binding sites for an alpha-conotoxin and snake venom neurotoxins in the nicotinic acetylcholine receptor from Torpedo californica

Photoinduced cross-links between the iodinated Lys26-p-azidobenzoyl derivative of neurotoxin II from Naja naja oxiana cobra venom and nicotinic acetylcholine receptor from Torpedo californica (AChR) have been studied in the presence of alpha-conotoxin GI from the marine snail C. geographus. Preincubation of the AChR-enriched membranes with increasing concentrations of alpha-conotoxin GI protects first the gamma subunit from photolabelling and then the delta subunit, the IC50 values being 0.76 and 5.01 microM, respectively. The results obtained, in view of the relevant data in literature, demonstrate that the (alpha + gamma) site, which is the high affinity site for d-tubocurarine, has also a higher affinity for an alpha-conotoxin than the (alpha + delta) containing site. The latter has a somewhat higher affinity than the (alpha + gamma) site towards some naturally occurring snake venom alpha-neurotoxins or their derivatives.     

Low-threshold, highly reliable 630 nm-band AlGaIP visible laserdiodes with AlInP buried waveguide

Low-threshold, highly reliable 630 nm-band AlGaInP visible laser diodes have been developed by employing a low-loss optical waveguide buried in the AlInP layer. A low-threshold current of 19 mA at 25°C is obtained with a cavity length of 310 μm. This current is the lowest value for 630 nm-band AlGaInP visible laser diodes, to our knowledge. Our AlInP-buried laser diodes with a cavity length of 500 μm operated over 7000 h without significant degradation at 60°C and 5 mW     

Development of 170 GHz/500 kW gyrotron

A development of 170GHz/500kW level gyrotron was carried out as R&D work of ITER. The oscillation mode is TE_31,8. In a short pulse experiment, the maximum power of 750kW was achieved at 85kV/40A. The efficiency was 22%. In the depressed collector operation, 500kW/36%/50ms was obtained. The maximum efficiency of 40% was obtained at P_RF=470kW whereas the power decrease by the electron trapping was observed. Pulse extension was done up to 10s at P_RF=170kW with the depressed collector operation. The power was limited by the temperature increase of the output window.     

Molecular cloning of a canine metallothionein cDNA

A canine metallothionein cDNA obtained from the liver of a cadmium-treated beagle was cloned and sequenced. Asn at position 4 conserved among all mammalian metallothionein-1 and metallothionein-2 is replaced by Asp in the canine metallothionein cDNA clone. Because the acidic amino acid doesn't exist at either position 10 or 11 in the deduced amino acid sequence, it is supposed that this cDNA is derived from canine metallothionein-1 mRNA. Northern blot analysis using the cDNA as a probe revealed the induction of the canine metallothionein mRNA expression in the liver and kidney of a cadmium-treated beagle. Thus, the canine metallothionein cDNA obtained in the present study should provide an useful tool for the molecular investigation of metallothionein in dog.