Photodetectors monolithically integrated on SOI substrate foroptical pickup using blue or near-infrared semiconductor laser

We made photodetectors on a silicon-on-insulator (SOI) substrate by a 0.35-μm BiCMOS fabrication process to detect the signal light used in an optical disk system. Investigating their characteristics at two wavelengths, 410 and 780 nm, for different structures, we found that the thickness of the silicon crystalline layer on the insulator strongly affected the frequency response at the longer wavelength, while the cutoff frequency was over 500 MHz for the shorter wavelength. We also simulated the frequency response     

Modelling and prediction of phyto- and zooplankton dynamics in Lake Kasumigaura by artificial neural networks

An artificial neural network model was developed for Lake Kasumigaura to predict timing and magnitudes for chlorophyll a, five species of blue-green algae and three zooplankton groups. The model was trained by 8 years of limnological time series and validated by two independent years. The validation showed the potential of neural networks as predictive tools for highly non-linear phenomena such as blue-green algal blooms in freshwater lakes.     

Energy‐Dissipative Matrices Enable Synergistic Toughening in Fiber Reinforced Soft Composites

Tough hydrogels have shown strong potential as structural biomaterials. These hydrogels alone, however, possess limited mechanical properties (such as low modulus) when compared to some load‐bearing tissues, e.g., ligaments and tendons. Developing both strong and tough soft materials is still a challenge. To overcome this obstacle, a new material design strategy has been recently introduced by combining tough hydrogels with woven fiber fabric to create fiber reinforced soft composites (FRSCs). The new FRSCs exhibit extremely high toughness and tensile properties, far superior to those of the neat components, indicating a synergistic effect. Here, focus is on understanding the role of energy dissipation of the soft matrix in the synergistic toughening of FRSCs. By selecting a range of soft matrix materials, from tough hydrogels to weak hydrogels and even a commercially available elastomer, the toughness of the matrix is determined to play a critical role in achieving extremely tough FRSCs. This work provides a good guide toward the universal design of soft composites with extraordinary fracture resistance capacity.     

Effect of GaAs surface pretreatment on electrical properties of MBE-ZnSe/GaAs substrate interfaces

Interface properties of MBE-grown ZnSe/GaAs substrate systems formed on variously pretreated GaAs surfaces, which include standard chemically etched (5H₂SO₄:1H₂O₂: 1H₂O), (NH₄)₂S_x-, NH₄I-, and HF-pretreated surfaces, are investigated by capacitance-voltage (C-V) and deep level transient spectroscopy (DLTS) measurements. A HF-pretreated and annealed ZnSe/p-GaAs sample showed marked reduction of interface state density, N_ss, with N_ss,_min below 4 x 10¹¹cm^-2 eV^-1 near E_c- E_FS= 1.0 eV. The value is about one order of magnitude smaller than that of the standard chemically etched interface, and comparable to (NH₄)₂S_x- pretreated interface. Nevertheless, C-V characteristics of ZnSe/nGaAs samples, which were measured for the first time, indicate that interface Fermi level, E_FS, is not completely unpinned due to the interface states located above the midgap. A consistent result was obtained by DLTS method in determining E_FS position. The influence of N_ss distribution on vertical current conduction is also analyzed. It is found that U-shaped interface states with N_ss(E) > 1 x 10¹³ cm^-2 eV^-1 above the midgap may cause an excess voltage drop larger than a few volts at the interface.     

A CMOS multichannel 10-Gb/s transceiver

We describe a CMOS multichannel transceiver that transmits and receives 10 Gb/s per channel over balanced copper media. The transceiver consists of two identical 10-Gb/s modules. Each module operates off a single 1.2-V supply and has a single 5-GHz phase-locked loop to supply a reference clock to two transmitter (Tx) channels and two receiver (Rx) channels. To track the input-signal phase, the Rx channel has a clock recovery unit (CRU), which uses a phase-interpolator-based timing generator and digital loop filter. The CRU can adjust the recovered clock phase with a resolution of 1.56 ps. Two sets of two-channel transceiver units were fabricated in 0.11-/spl mu/m CMOS on a single test chip. The transceiver unit size was 1.6 mm /spl times/ 2.6 mm. The Rx sensitivity was 120-mVp-p differential with a 70-ps phase margin for a common-mode voltage ranging from 0.6 to 1.0 V. The evaluated jitter tolerance curve met the OC-192 specification.     

Incentive‐rewarding mechanism to stimulate activities in social networking services

We have developed an incentive‐rewarding mechanism that stimulates activities in social networking services (SNSs), including content uploading and link establishment. We particularly focus on changing the reward assignment ratio based on the different risks users perceive when uploading content with different privacy settings: public‐open and friend‐limited. Learning‐based simulation allowed us to observe that SNS activity, which we measured as the amount of browsed content within a certain period, can be controlled by a rewarding assignment ratio. We then analyzed how the amount of uploaded content and the increase of established links affect SNS activity. Results suggested that the optimal reward assignment ratio to maximize SNS activity changes depending on the total amount of available reward resources. Copyright © 2011 John Wiley & Sons, Ltd.     

Tough and Self‐Recoverable Thin Hydrogel Membranes for Biological Applications

Tough and self‐recoverable hydrogel membranes with micrometer‐scale thickness are promising for biomedical applications, which, however, rarely be realized due to the intrinsic brittleness of hydrogels. In this work, for the first time, by combing noncovalent DN strategy and spin‐coating method, we successfully fabricated thin (thickness: 5–100 µm), yet tough (work of extension at fracture: 10⁵–10⁷ J m^?3) and 100% self‐recoverable hydrogel membranes with high water content (62–97 wt%) in large size (≈100 cm²). Amphiphilic triblock copolymers, which form physical gels by self‐assembly, were used for the first network. Linear polymers that physically associate with the hydrophilic midblocks of the first network, were chosen for the second network. The inter‐network associations serve as reversible sacrificial bonds that impart toughness and self‐recovery properties on the hydrogel membranes. The excellent mechanical properties of these obtained tough and thin gel membranes are comparable, or even superior to many biological membranes. The in vitro and in vivo tests show that these hydrogel membranes are biocompatible, and postoperative nonadhesive to neighboring organs. The excellent mechanical and biocompatible properties make these thin hydrogel membranes potentially suitable for use as biological or postoperative antiadhesive membranes.     

Material and process challenges in 100 nm interconnects module technology and beyond

In order for ultra-large-integrated (ULSI) circuits manufacturing to minimize the Cost of Ownership (CoO) aspect in the wiring process and realize fabricating semiconductor devices over 100 nm node, several Cu/low-k wiring technologies have been proposed. The evidential criteria in choosing the most probable one are physical or material limitation and requirements from manufacturing. A development of module processes (e.g., processing from low-k dielectrics to metal CMP) with proven equipment and material is an appropriate approach and has a high potential in overcoming those difficulties. In this paper, an advantage of dual Damascene Cu wiring accompanied with low-k (dielectric constant ∼2.7) and prediction of 100 nm Cu wiring module will be discussed.     

Annealing effects of a high-quality ZnTe substrate

The sharp photoluminescence (PL) and optical-reflection spectra in the bandedge region of the high-quality nondoped ZnTe substrate (100) were observed at 4.2 K. Free exciton, associated with lower and upper polaritons (EX^L and EX^U) at 2.382 eV and 2.381 eV, respectively, were clearly observed. This meant that this substrate was high quality. The intensity of a bound exciton peak (2.375 eV), which is caused by a Zn vacancy, of a neutral acceptor decreased with an increase of the Zn vapor pressures.     

Development of an active targeting liposome encapsulated with high-density colloidal gold for transmission electron microscopy

Active targeting of the liposome is an attractive strategy for drug delivery and in vivo bio-imaging. We previously reported the specific accumulation of Sialyl Lewis X (SLX) liposome to inflamed tissue in arthritic model mice or tumor-bearing mice. SLX-liposome encapsulation with fluorescent substances allows for the visualization of these liposomes by the time-dependent transvascular accumulation of fluorescent signals in the histological sections. In the present study, we developed a new SLX-liposome encapsulated with colloidal gold for transmission electron microscopic observation. We herein describe the characterization of the colloidal gold-loaded SLX-liposomes and demonstrate its specific targeting to the endothelial cells of tumor blood vessels in tumor-bearing mice.