Dominant stress region for crack initiation at interface edge of microdot on a substrate

In order to examine the mechanics of crack initiation at the free interface edge of a microcomponent on a substrate, delamination tests are carried out for two specimen shapes of Cr microdots on a SiO₂ substrate. The microdots of the first specimen are shaped like the frustum of a round cone. The Cr microdots are successfully delaminated from the SiO₂ substrate in a brittle manner and the critical load is measured by atomic force microscopy (AFM) with a lateral loading apparatus. Stress analysis reveals that a singular stress field exists near the interface edge and the strength for the crack initiation is governed by the intensified normal stress field. The critical stress intensity parameter is evaluated as K_σC ≈ 0.24 MPa m^0.39. Similar delamination tests are conducted for microdots shaped like the frustum of an oval cone. The stress distributions at the crack initiation of this specimen shape show a higher normal stress than the first specimen shape in the region near the interface edge of about x < 40 nm, while it is lower in the region of about x > 50 nm (x: distance from the edge). This suggests a limitation of conventional fracture mechanics: namely, the crack initiation in these specimens is not uniquely governed by the intensity of the singular field. It is found that the delamination crack is initiated when the averaged stress σ_ya in the region of 90-130 nm reaches 190-270 MPa, regardless of the specimen shape. This indicates that the dominant stress region of crack initiation is roughly estimated as 90-130 nm and the criterion is given in terms of the averaged stress in the region.     

Distribution of double bonds in thermally degraded polyisobutylene

The distribution of double bonds in thermally degraded polyisobutylene was determined quantitatively by using pulsed Fourier transform ¹H n.m.r. spectroscopic analysis. The double bonds in the degraded polymer did not exist in the interior but at the terminal positions of the polymer chain. These olefins were of the terminal trisubstituted and terminal vinylidene types. The content of the former was much greater than that of the latter. This shows that radical chain transfer predominantly occurs at the methylene hydrogen rather than at the methyl groups of the polymer chain. The average number of double bonds per molecule, f, was greater than 1 and tended to be near 2. Thereby most of the degraded polyisobutylene was shown to have two terminal unsaturations per molecule.     

Deformation and fracture of α-β brass two-phase bicrystals at 150 K

The deformation up to fracture at 150 K was undertaken on α-β brass two-phase bicrystals. The variation of the slip systems during the proceeding deformation was studied and explained on the basis of incompatible stresses. The normal stress-strain curves were analyzed for various types of bicrystals and the bending that appeared in the specimens when unloaded was explained with respect to the occurrence of the Bauschinger effect in the α phase. Fracture modes other than those observed at room temperature were present. The results, and other minor problems, were discussed.     

Two-wavelength laser diode interferometer with time-sharing sinusoidal phase modulation

We describe an interferometer system that uses two separate wavelengths to measure step height. The overlapping interference images detected by a CCD camera are easily separated by an ordinary integrating-bucket method and time-sharing sinusoidal phase modulation, in which two laser diodes are alternately modulated with a sinusoidal signal. A phase map is obtained only for the laser diode into which the modulation signal is injected. In this instance, a 1-microm step height was accurately detected.     

Radical polymerization of methyl methacrylate with some 1,2-disubstituted tetraphenylethanes as thermal iniferters

Summary The bulk polymerization of methyl methacrylate (MMA) with 1,2-disubstituted tetraphenylethanes, tetraphenylsuccinodinitrile (TPSN), tetra(p-methoxyphenyl)succinodinitrile (TMPSN), and pentaphenylethane (PPE), was investigated. These compounds were found to serve as thermal iniferters to induce living radical polymerization via a mechanism close to the model proposed previously (see Eq. 2). However, the living nature was not so high, because undesirable side reactions occurred. The oligomer with molecular weight of 2500 was isolated from the reaction mixture of MMA with TPSN, which was found to cause further polymerization of MMA. From the polymerization of styrene (St) with the polymers obtained by these iniferters, the block copolymers were produced.     

Phase morphologies and mechanical properties of high‐impact polystyrene (HIPS) and polycarbonate blends compatibilized with polystyrene and polyarylate block copolymer

Phasemorphology and mechanical properties of blends of high‐impact polystyrene (HIPS) and polycarbonate (PC) blends compatibilized with a polystyrene (PS) and polyarylate (PAr) (PS–PAr) block copolymer were investigated. Over a broad range of composition from 50/50 through 30/70, HIPS/PC blends formed cocontinuous structures induced by the flow during the extrusion or injection‐molding processes. These cocontinuous phases had heterogeneity between the parallel and perpendicular directions to the flow. The micromorphology in the parallel direction to the flow consisted of stringlike phases, which were highly elongated along the flow. Their longitudinal size was long enough to be longer than 180 μm, while their lateral size was shorter than 5 μm, whereas that in the perpendicular direction to the flow showed a cocontinuous phase with regular spacing due to interconnection or blanching among the stringlike phases. The PS–PAr block copolymer was found to successfully compatibilize the HIPS/PC blends. The lateral size of the stringlike phases could be controlled both by the amount of the PS–PAr block copolymer added and by the shear rate during the extrusion or injection‐molding process without changing their longitudinal size. The HIPS/PC blend compatibilized with 3 wt % of the PS–PAr block copolymer under an average shear rate of 675 s^?1 showed a stringlike phase whose lateral size was reduced almost equal to the rubber particle size in HIPS. The tensile modulus and yield stress of the HIPS/PC blends could be explained by the addition rule of each component, while the elongation at break was almost equal to that of PC. These mechanical properties of the HIPS/PC blends can be explained by a parallel connection model independent of the HIPS and PC phases. On the other hand, the toughness factor of the HIPS/PC blends strongly depended on the lateral size of the stringlike phases and the rubber particle size in the HIPS. It was found that the size of the string phases and the rubber particle should be smaller than 1.0 μm to attain a reasonable energy absorbency by blending HIPS and PC. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 2347–2360, 2001     

Remarks on the tracking method of neural network weight change for a learning-type neural network feed-forward feed-back controller

Although many neural network controllers have been proposed, we still have to tune several parameters of neural networks in order to obtain a better learning performance in practical applications. Our tracking method provides a new aspect of this tuning of neural network parameters. It has been applied to adaptive and learning-type neural network direct controllers, and an adaptive-type neural network feed-forward feed-back controller. This work applied it to a learning-type neural network feed-forward feed-back controller. Simulation results confirmed its usefulness, and we discuss a transformation of the track on a 2D plane to one-dimensional values.     

Preparation and characterization of electroplated amorphous gold-nickel alloy film for electrical contact applications

A process for electroplating amorphous gold-nickel alloy with the atomic ratio of unity was developed. The plating bath was prepared by adding potassium cyanoaurate(I) into a known plating bath which produces amorphous nickel-tungsten alloy. At a sufficiently high gold concentration, the alloy deposit did not contain any tungsten. The amorphous nature of the Au-Ni alloy produced in the new bath was confirmed by using TEM and THEED. Hardness, resistivity, and contact resistance of this new alloy were determined, and the results are discussed for applications as an electrical contact material.     

Scintillation properties of Tm-doped Lu3Al5O12 single crystals

Using the micro-pulling-down (μ-PD) method, Tm-doped Lu₃Al₅O₁₂ (Tm:LuAG) single crystals were grown to examine their scintillation properties. In transmittance spectra, they exhibited about 80% transparency in the wavelengths longer than 320 nm and five absorption lines due to Tm³⁺ 4f–4f transitions were observed. ²⁴¹Am α-ray excited radioluminescence spectra were measured and intense 4f–4f emission peaks were observed with the host emission. When excited by ¹³⁷Cs γ-Ray to obtain pulse height spectra, Tm 1% doped LuAG showed the highest light yield coupled with a photomultiplier (PMT) or a silicon avalanche photodiode (Si-APD). The light yield was estimated to be 5800 and 7300 photons/MeV for PMT and Si-APD, respectively. Decay time profiles consist of two exponential components and the fast and slow components are considered to be attributed to the host and the combination of the host and Tm³⁺ 4f–4f emission, respectively.     

Adaptive locks: Combining transactions and locks for efficient concurrency

Transactional memory is being advanced as an alternative to traditional lock-based synchronization for concurrent programming. Transactional memory simplifies the programming model and maximizes concurrency. At the same time, transactions can suffer from interference that causes them to often abort, from heavy overheads for memory accesses, and from expressiveness limitations (e.g., for I/O operations). In this paper we propose an adaptive locking technique that dynamically observes whether a critical section would be best executed transactionally or while holding a mutex lock. The critical new elements of our approach include the adaptivity logic and cost–benefit analysis, a low-overhead implementation of statistics collection and adaptive locking in a full C compiler, and an exposition of the effects on the programming model. In experiments with both micro and macrobenchmarks we found adaptive locks to consistently match or outperform the better of the two component mechanisms (mutexes or transactions). Compared to either mechanism alone, adaptive locks often provide 3-to-10x speedups. Additionally, adaptive locks simplify the programming model by reducing the need for fine-grained locking: with adaptive locks, the programmer can specify coarse-grained locking annotations and often achieve fine-grained locking performance due to the transactional memory mechanisms.