Differences in knowledge production between disciplines based on analysis of paper styles and citation patterns

To identify the differences in the knowledge production between disciplines, we analyzed the relation between the average paper length and impact factor of 100 journals from 5 disciplines. We found negative correlation between the average length and the impact factor in the natural sciences, but not in the social sciences. We also analyzed the structures of paper and the citation patterns. These analyses are expanded to the comparison between Mode 1 and Mode 2. All results showed the natural sciences articles could emphasize the differences from previous studies and be diffused effectively by the short standardized style of paper. This research is partly funded by International Program in Special Coordinating Funds for Promoting S&T from Science and Technology Agency of Japan.     

Increase of stress intensity near interface edge of elastic-creep Bi-material under a sustained load

The transition from small-scale creep to large-scale creep ahead of a crack tip or an interface edge with strong elastic stress singularity at the loading instant causes stress relaxation and the decrease of stress intensity in general. However, this study shows that the stress near the interface edge of bi-material with no or weak elastic stress singularity increases after the loading instant and brings about the stress concentration during the transition. In addition, the creep strain distribution of this bi-material after the loading instant is different from that occurred in the transition of an interface edge with strong elastic stress singularity or a crack tip (notch root). The criterion for the increase or decrease of stress intensity near the interface edge proved by the finite element method is proposed in this study. The stress intensity near the interface edge increases when the elastic stress singularity is lower than the creep stress singularity (λ^el < λ^cr) and vice versa.     

Microstructure Control of Sintered Porous Yttria-Stabilized Zirconia as a Durable Thermal Shielding Material

The microstructure of a thermal shielding material affects its thermal conductivity and mechanical property. In this study, the effects of the sintering temperature and the polymethyl methacrylate powder as a pore-former on the microstructure of a sintered porous yttria-stabilized zirconia (YSZ), which is used as a durable thermal shielding material, were investigated. It became clear that the microstructure of the sintered YSZ could be controlled by the particle size and the amount of the pore-former and the sintering temperature. The effect of the yttria amount in the YSZ on the microstructure was also clarified.     

Photoluminescence of Rare-Earth-Doped Ca-α-SiAlON Phosphors: Composition and Concentration Dependence

Rare-earth-doped Ca-α-SiAlON phosphors, with the compositions of (Ca_{1−3/2 x} RE _x ) _{m /2}Si_{12− m − n} Al _m+n O _n N_{16− n} (RE=Ce, Sm, and Dy, 0.5≤ m =2 n ≤3.0), were prepared by sintering at 1700°C for 2 h under 10 atm N₂. The concentration of rare earths varied from 3 to 30 at.% with respect to Ca. The photoluminescence (PL) properties were investigated as functions of the composition of the host matrix (i.e., m ) and the concentration of rare earths (i.e., x ). The results show that the emission properties can be optimized by tailoring m and x . The Ce³⁺ luminescence originating from the 4 f –5 d interconfigurational transitions is greatly affected by the environment surrounding the Ce³⁺ ions, which differs from the Sm³⁺ or Dy³⁺ luminescence arising from the 4 f –4 f intraconfigurational transitions. X-ray diffraction and scanning electron microscopy were used to explain the composition and concentration dependence of PL properties.     

Multiple‐valued immune network with apoptosis system

In this paper, we describe a new model of immune network based on biological immune response network. We propose an immunity like multiple‐valued network with apoptosis mechanism. The model is based on the interaction between B cells and T cells and the biological apoptosis mechanism in the human body. With the mechanism, a naturally immune system can be reproduced. The model is also applied to pattern recognition. It becomes possible with a conventional model to restrict the category increase of memory patterns. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 162(3): 51– 57, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20320     

Creation of Ferroelectric, Single-Crystal Architecture in Sm0.5La0.5BGeO5 Glass

Using a novel, selective heating by Nd:YAG laser, a single-crystal architecture is created in a model glass system, Sm_0.5La_0.5BGeO₅, which devitrifies congruently into a ferroelectric phase of the same composition as the parent glass. The Sm³⁺ ions in glass absorb the light and heat the matrix locally resulting in devitrification. Initially, a polycrystalline spot is formed. However, with optimum laser power, scanning speed, and the depth of focus, one of the grains acts as the seed for further growth as a single crystal. By programming the relative displacement of the glass with respect to laser spot, desired single ferroelectric crystal architecture is created. The optical functionalities (guiding of light and second harmonic generation) of the architectures are shown, which demonstrate the viability of this method for constructing active elements in optical integrated circuits. The single-crystal nature of the architecture is confirmed from the electron backscattered diffraction results.     

New bleeding model of additives in a polypropylene film under atmospheric pressure II

Many additives are commercially used to add more favorable qualities to films. The bleeding process by which the additive in a film comes to the surface is considered. A new bleeding model of additives in a polypropylene film under atmospheric pressure was investigated. Solubility and diffusion are found to be important for explaining this bleeding process. It was found that the experimental results were explained more precisely by assuming a two‐step transport process between the crystalline regions and the amorphous ones. The solubilities and diffusion coefficients of UV‐stabilizers such as 2‐(2H‐benzotriazol‐2‐yl)‐4‐(1,1,3,3‐tetramethylbutyl)phenol and 2‐(2H‐benzotriazol‐2‐yl)‐4‐methylphenol were determined at 40°C. The difference between the saturation solubilities and the diffusion coefficients of UV‐stabilizers was discussed by comparing with the results of molecular dynamics (MD) simulation. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Electrolytic removal of ammonia from brine wastewater: scale‐up,operation and pilot‐scale evaluation

Brine wastewater with a high ammonia content from an iodine processing plant (commonly called kansui in Japan) was treated by electrolysis. The system, which can be considered as an indirect electrolytic treatment process, generates chlorine at the anodes and initiates the formation of mixed oxidants like hypochlorous acid. The oxidants then act as agents for ammonia destruction. Laboratory‐scale experiments showed that high ammonia concentrations (as much as 200 mg dm^?3) could be completely removed within a few minutes, and could be considered a good alternative for efficient ammonia removal from saline wastewaters. From laboratory‐scale experiments in the batch and continuous modes, the charge dose was analyzed and used as the operating and scale‐up factor. The value of the charge dose was not severely affected by changes in operating conditions such as electrode spacing and temperature. The charge dose from batch and continuous runs was found to be in the range of 23 C (mg NH₄‐N removed)^?1 to 29 C (mg NH₄‐N removed)^?1. Using the charge dose obtained from laboratory‐scale continuous electrolysis experiments as the scale‐up factor, a pilot‐scale reactor was designed, and the operating conditions were calculated. In the pilot‐scale reactor tests at different flow rates, the effluent ammonia concentrations were reasonably close to the calculated values predicted from the charge dose equation. Copyright © 2004 Society of Chemical Industry     

Millimeter-Wave Radiometer for the Measurement of Stratospheric ClO Using a Superconductive (SIS) Receiver Installed in the Southern Hemisphere

A new sensitive radiometer for atmospheric minor constituents has been developed by Nagoya University and the National Institute for Environmental Studies (NIES). The instrument equipped low-noise superconducting (SIS) mixer with a system noise temperature of ≈200K (SSB) at 204GHz. The SIS mixer is operated in a single side band mode with a side band ratio grater than 10dB by adjusting the two tunable backshorts of the mixer. Since any additional SSB filters are not necessary, we can simplify the quasi-optical system and reduce the standing waves which makes difficult to achieve a flat spectral baseline. We installed the observation system at Las Campanas Observatory, Chile in December 1999, and started the test observation from 2000 October. We have detected significant ClO emission at 204.3 GHz with an actual observation time of only 4 hours. This is the first detection of the ClO at 40km altitude from the mid-latitude region of the southern hemisphere. The Nagoya-NIES system has enabled continuous monitoring of ClO in the stratosphere with a time resolution of 4 or 5 hours.