Precise rendering method for exact anti-aliasing and highlighting

This paper introduces the Precise Rendering Method, which generates accurately anti-aliased and highlighted images from tessellated polygons. The Precise Rendering Method first solves the aliasing problems of hidden surface removal by using the Cross Scanline Algorithm. This algorithm can exactly calculate polygon areas projected onto each pixel by using horizontal and vertical scanlines. Aliasing artifacts in shading are then prevented by the Reflection Intergration Method, which analytically integrates the intensity of reflection in the solid angle defined by surface normals at vertices of the projected area. Several synthesized images are created to show the efficiency of the Precise Rendering Method.     

Radiation tolerance of type IIa synthetic diamond detector for 14 MeV neutrons

Radiation tolerance of a type IIa synthetic diamond detector was examined from irradiation of mono-energetic 14 MeV neutrons. Measurements of I–V (current–voltage) characteristics and energy spectrum for 5.486 MeV alpha particles were performed after neutron irradiation. In the I–V characteristics measurement, enhancement of rectification was observed after neutron irradiation of up to 2.0 × 10¹² n/cm². Concurrently with the enhancement of rectification, significant decrease in signal amplitude was observed in energy spectrum measurement for alpha particles. It is considered that these changes were due to increase in the concentration of defects acting as shallow energy levels in the forbidden band. For neutron irradiation of higher than 1.6 × 10¹³ n/cm², weakening of the rectification characteristics and recovery of the signal amplitude were observed. These changes imply that deep energy levels, which were also considered to be introduced by defects, were dominant and weakened the effects of the shallow energy levels. Increase in the concentration of the deep trapping levels resulted in gradual decrease of the signal amplitude and degradation in the energy resolution. The peak for the alpha particles was obtained up to 5.5 × 10¹³ n/cm².     

Oxygen consumption for constant work is minimal at lowest working contractility in normal dog hearts

We tested whether minimal myocardial oxygen consumption (MVO2) for a given external work would exist in the middle of a normal contractility range as previously predicted theoretically. The left ventricle of the excised cross-circulated dog heart preparation was connected to a volume servo pump. Myocardial contractility in terms of ventricular end-systolic elastance (Emax) was gradually increased from control 8.9 +/- 3.4 (mean +/- SD) to 30.0 mmHg/(ml/100 g) by epinephrine and decreased to 1.8 mmHg/(ml/100 g) by propranolol while heart rate, end-systolic pressure and stroke work were kept constant. MVO2 was determined as the product of total coronary flow and coronary arteriovenous oxygen content difference in each contractile state. We plotted MVO2 values against E(max) values in each heart. The MVO2-E(max) relation for a constant cardiac work showed that MVO2 was minimal at the low end of the covered E(max) range. We conclude that minimal MVO2 for a given cardiac work is generally obtained at the lowest working contractility in normal dog hearts. This conclusion might pose some problems in the previous theoretical prediction as to the contractility that achieves the minimal MVO2 in a given external work.     

Subacute toxicity of piperonyl butoxide in ICR mice

Piperonyl butoxide, alpha-[2-(2-butoxyethoxy)ethoxy]-4,5-methylenedioxy-2-propyltol uene, is a pesticide synergist. ICR mice of both sexes were maintained on diet containing 0, 0.1, 0.3 or 0.9% of piperonyl butoxide for 20 days. At the end of the experimental period, they were necropsied. Selected organs were weighed and serum chemistries were analyzed. In male and female mice of the 0.9% group, body weight, kidney and spleen weight were depressed in comparison to those of control group. Liver weight of the 0.3 and 0.9% group of both sexes were significantly higher than those of control group. Mice of the 0.9% group of both sexes had increased serum levels of cholesterol, total protein, gamma-glutamyl transpeptidase. Histological examination of livers from mice of the 0.9% group by light microscopy showed enlarged hepatocytes, anisonucleosis and single cell necrosis. The results indicated that subacute toxicity of piperonyl butoxide in ICR mice was directed primarily at liver.     

Development of `information collection and delivery sensor basesystem' for large-scale power systems

The authors present a real-time database system capable of collecting and delivering a large amount of information accurately at a high speed and by a simple method. This system has a microprocessor unit (MPU) for each private communication line around the main memory and coordinates the independent parallel operation for a number of these MPUs with the main memory access operation, using a fixed cyclic scan method and having all the MPUs perform multi-operation. Many advantages can be expected when this method is adopted, especially for the monitoring and control of power systems. Degradation of the system can be avoided during an information rush due to accidents, and it can be easily extended when adding to or expanding the power facilities in the future. Excellent daily maintainability can be assured, and a low overall cost can be expected     

Fractal dimension of the grain boundary fracture in creep-fracture of cobalt-based heat resistant alloys

The effects of grain boundary configuration and creep conditions on the fractal dimension of the grain boundary fracture (D _f) were investigated using commercial cobalt-based heat resistant alloys, namely, HS-21 and L-605 alloys. Creep-rupture experiments were carried out under the initial creep stresses of 19.6–176 MPa in the temperature range from 1089–1422 K in air. The value of D _f was larger in specimens with serrated grain boundaries than in those with straight grain boundaries in the HS-21 alloy under the same creep condition, and the difference in the value of D _f between these specimens was large in the scale range of the analysis which was less than about one grain boundary length. However, there was almost no difference in the value of D _f between the specimens with serrated grain boundaries and those with straight grain boundaries in the L-605 alloy, because there was no obvious difference in the microstructure between these specimens. The value of D _f increased with decreasing creep stress in the scale range of the fractal analysis larger than about one grain boundary length in both HS-21 and L-605 alloys, while the stress dependence of D _f was larger in the HS-21 alloy. The stress dependence of D _f was explained by the stress dependence on the number of grain boundary microcracks linked to the fracture surface. The value of D _f estimated in the scale range smaller than about one grain boundary length showed essentially no stress dependence in both L-605 and HS-21 alloys.     

Salmonid observations at a Klamath River thermal refuge under various hydrological and meteorological conditions

The Beaver Creek confluence with the main‐stem Klamath River was studied to assess salmonid use in a thermal mixing zone under various summer hydrological and meteorological conditions. Main‐stem flow releases from Iron Gate Dam ranged from 17 cms (615 cfs) to 37 cms (1320 cfs) during the study period and main‐stem water temperatures ranged from 19.5 to 26°C. A grid was constructed to define the thermal refuge as a system of cells. Temperatures were monitored using remote temperature loggers and fish counts were conducted using daytime snorkelling. Most juvenile salmonids were observed moving into the refuge when main‐stem temperatures exceeded 22–23°C. Salmonids in the thermal refuge did not necessarily seek the coolest water, but were generally located in habitats commensurate with species‐specific behavioural needs within their thermal tolerance range. Such ranges largely occurred within refuge areas. Variable meteorological conditions confounded observable biological thermal benefit to fish resulting from higher or lower main‐stem flows. Thermal regime dynamics indicated that under the hydrological and meteorological conditions observed, higher flows from Iron Gate Dam showed some ability to change the structure of the refuge area. It appeared that without the thermal refuge, main‐stem flows alone could not sustain the salmonid population because high water temperatures usually exceeded their published thermal tolerance limits. Copyright © 2007 John Wiley & Sons, Ltd.     

The combined method: a novel access technique for fetal endoscopic surgery

BACKGROUND/PURPOSE: To develop practical and less invasive techniques for fetal endoscopic surgery, new methods of lifting the uterine wall to allow fetal surgery without maternal laparotomy were developed and assessed. METHODS: Fetal endoscopic surgical procedures, including tracheostomy and umbilical vascular cannulation, were performed using one of the three methods to enter the uterus without maternal laparotomy in pregnant goats (n = 6; 105 to 115 days' gestation): (1) direct uterine lifting with an air-cushion device; (2) indirect uterine lifting, in which the uterine wall was fixed to the maternal abdominal wall using balloon tip ports inserted percutaneously by Seldinger's method, then the maternal abdomen was lifted mechanically; and (3) combined method, in which low pressure CO2 (5 mm Hg for initial inflation and 2 mm Hg for maintenance) was insufflated into the uterus in addition to the indirect uterine lifting cited above. RESULTS: The direct uterine lifting caused massive injury of myometrium and uterine membranes. The creation of intrauterine space and the protection of the membranes were not accomplished effectively by the indirect uterine lifting only. The combined method provided the adequate intrauterine space and excellent endoscopic visibility for completion of the endoscopic procedures with minimal uterine injury. CONCLUSION: The fetal endoscopic surgery may be accomplished simply and safely by the combined method, a novel technique of uterine lifting to allow fetal surgery without maternal laparotomy.