Composition Regulation by Flow Copolymerization of Methyl Methacrylate and Glycidyl Methacrylate with Free Radical Method

It is important to match the feeding ratio of comonomers to the composition ratio in the resulting copolymers as closely as possible in industrial production, where the goal is often to produce more a homogeneous composition in copolymers. In this study, a flow copolymerization system with a conventionally initiated free radical method, together with randomly selected polymerization conditions is investigated. It is succeeded in achieving a closer match between the composition ratio and feeding ratio than previously reported in the copolymerization of styrene with methyl methacrylate and of glycidyl methacrylate with methyl methacrylate, which will widen the range of applications, by precisely controlling the mixing and heating in a flow polymerization apparatus. This is confirmed by the fact that the estimated values of reactivity ratios, r₁ and r₂, which are used in the reaction kinetics of copolymerization, are close to 1.     

Fracture toughness of silica particulate‐filled epoxy composite

The relationship between the postcuring conditions and fracture toughness on three silica particulate‐filled epoxy composites was investigated. The glass transition temperature, T_g, and the fragility parameter, m, derived from the thermo‐viscoelasticity, were used to characterize the composites, which were postcured under various conditions. The glass transition temperature and fragility both depended on both of the curing conditions and the volume fraction of silica particles. The glass transition temperature increased with the postcuring time and temperature, while the fragility generally decreased as the volume fraction increased. There was no direct correlation between the glass transition temperature and fragility. The fracture toughness depended on both the glass transition temperature and fragility. The composites with a high glass transition temperature and low fragility had high fracture toughness. These results indicate that the glass transition temperature and fragility are useful parameters for estimating the fracture toughness of the silica particulate‐filled epoxy composites. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2261–2265, 2002     

Fracture toughness of bisphenol A‐type epoxy resin

The relationship between the postcuring conditions and the fracture toughness of a bisphenol A‐type epoxy resin cured with acid anhydride was investigated. The glass transition temperature and fragility parameter, derived from the thermo‐viscoelasticity, were used to characterize the epoxy resin postcured under various conditions. Relationship between these two parameters and the fracture toughness was then investigated, based on the fractography results of a microscopic roughness examination of a fractured surface. The values of the glass transition temperature and fragility greatly depended on the postcuring conditions. The glass transition temperature was approximately 400 K when the crosslinking reaction was saturated. The fragility was independent of the saturation of the reaction and varied between 50 and 180. The results of the fracture test and fractography examination showed that there was no direct correlation between the glass transition temperature, the fracture toughness, and the roughness. On the other hand, there was a correlation between the fragility, fracture toughness, and roughness when the glass transition temperature saturated (at 400 K). As the fragility decreased from 180 to 50, the fracture toughness increased from 0.6 to 1.1 MPa · m^1/2 at the same glass transition temperature. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 10: 2266–2271, 2002     

TRANSPORT PROPERTIES OF CELLULAR FOOD MATERIALS UNDERGOING FREEZE-DRYING

The samples of sliced and mashed apples were freeze-dried by controlling their surface temperatures over the usual pressure range of commercial operations. The surface of sliced samples could not be maintained at above 10°C in order to prevent the frozen layer from melting, while that of mashed samples was allowed to heat up to 70°C.

Thermal conductivities and permeabilities were determined by applying the uniformly-retreating-ice front model to the dried layer of the samples undergoing freeze-drying. The values of permeability for the mashed samples were found to depend on the ice-crystallization time during freezing. The results indicated that the drying rate of sliced samples was limited by the transfer rate of water vapor flowing through the dried layer. A cellular structural model is proposed for predicting the permeability of the dried layer, based on the resistance of the cell membrane to molecular transfer of water vapor.     

Lewis Acid‐Catalyzed or Base‐Promoted Regioselective Cycloisomerization of N‐Imidoyl‐o‐alkynylanilines for Synthesis of N‐Imidoyl‐(1 H)‐indoles and 4‐Alkylidene‐3,4‐dihydroquinazolines

Product selectivity control for the synthesis of imidoylindoles and 4‐alkylidenedihydroquinazolines from N‐imidoyl‐o‐alkynylanilines via silver triflate‐catalyzed cycloisomerization or tetrabutylammonium fluoride‐promoted cyclization is described. The product selectivity depends mainly on the catalyst/promoter used, and on the substituents on the alkyne and amidine functions of the substrates.

     

A highly transparent and thermally stable copolymer of 1‐adamantyl methacrylate and styrene

Thermal and optical properties of copolymers of 1‐adamantyl methacrylate (AdMA) and styrene (St) prepared by free radical polymerization in the bulk are investigated. The copolymer forms an azeotrope when the composition is AdMA/St = 55/45 mol%. The glass transition temperature and decomposition temperature of the azeotropic copolymer are 170 and ca 340 °C, respectively. The refractive index increases nonlinearly with St content from 1.522 to 1.591. The light scattering loss at 633 nm is 28.1 dB km^?1, which is less than half of that of polystyrene. The total optical loss including molecular vibrational absorption, which is evaluated using a copolymer‐based optical fiber, is 292–645 dB km^?1 at 500–700 nm. These values correspond to transmittances of 86–93% for a 1 m optical path length. © 2014 Society of Chemical Industry     

Fabrication of high‐strength steel fibre reinforced metal matrix composites by explosive bonding and their tensile properties

Summary

Steel fibre reinforced metal matrix composites (FRM) consisting of high‐strength ductile steel wire and aluminium or titanium foil were fabricated by explosive bonding. The strength properties were evaluated by tensile tests. The optimum explosive loading (explosive mass/driver plate mass) increases with the volume fraction of fibre. For the aluminium matrix composites, the micrographs obtained show sound bonding between the adjoining foils and non‐bonding between the foil and steel wire. The tensile strength of the aluminium matrix composites is 80% of the value predicted by the rule of mixtures. For the titanium matrix composites, the micrographs obtained show both bonded and unbonded regions between the adjoining foils or between the foil and steel wire. The tensile strength of the titanium matrix composites agrees with the value predicted by the rule of mixtures.     

Effects of time averaging on optical scintillation in a ground-to-satellite atmospheric propagation

Temporal natures for a variance of turbulence-induced log-intensity fluctuations are obtained. The variance of the optical fluctuation is reduced when the optical signals are integrated in a photodetector, and we express the index of reduction (called the time-averaging factor) by using an autocovariance function of the optical fluctuation. The optical fluctuations for a ground-to-satellite path are caused by both atmospheric turbulence and the beam-pointing jitter error of the optical transmitter. The turbulence-induced optical scintillation can be discriminated from the fluctuation that is due to the beam-pointing jitter error. The compared result from the probability density function of the optical signal reveals good agreement. The temporal autocovariance functions of optical scintillation are obtained and used to calculate the time-averaging factor. The analytically expected effects of time averaging are verified by the experimental results. The estimations contribute to the link budget design for the optical tracking channel through atmospheric turbulence.     

Effects of pre-ageing and cold working on grain-interior and grain-boundary reactions of Ag-Pd-Cu alloys

The effects of pre-ageing and cold working on grain-interior and grain-boundary reactions of Ag-Pd-Cu alloys were investigated by electrical resistivity measurements, hardness tests, and optical microscopic observations. Hardness values of the grain interior after the final thermomechanical treatment increased 20%–30% above the values after conventional ageing. The hardness values of alloys preaged at 400°C for 1 min and then cold worked at 30% are the highest (H_v=320).