Ketones from carboxylic acids over supported magnesium oxide and related catalysts

Silica-supported alkaline earth oxides revealed excellent activity to convert acetic acid selectively into acetone in a vapor-phase fixed-bed flow system. Acetone was obtained through the cyclic formation of alkaline earth acetate followed by decomposition. Magnesium oxide should be supported on the silica surface without formation of magnesium silicate, which was inactive for the present reaction. Attempted syntheses of benzophenone and acetophenone are also described.     

Characterization and application of polypropylene films modified with stimuli‐sensitive copolymers with an Ar‐plasma postpolymerization technique

Surface‐modified polypropylene (PP) films with thermally and photochemically sensitive copolymers consisting of N‐(2‐hydroxypropyl)methacrylamide (HPMA) and 4‐(4‐methoxyphenylazo)phenyl methacrylate (MPAP), poly(HPMA‐co‐MPAP)‐g‐PP (abbreviated g‐PP) film, were prepared by graft copolymerization with an Ar‐plasma postpolymerization technique. The surfaces of the g‐PP films were characterized by means of X‐ray photoelectron spectroscopy; the percentage grafting of poly(HPMA‐co‐MPAP) with a number‐average molecular weight of 3.28 × 10⁴ was 7.12%, and the molar ratio of HPMA–MPAH in the copolymer was 0.75:0.25. The stimuli‐sensitive adsorption of albumin and polystyrene microspheres on the g‐PP film was also measured. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 143–148, 2003     

Some characteristics of a sparged agitated vessel under foaming — Mechanical control of foaming —

Foam-breaking with a rotating disk mechanical foam-breaker (MFRD) was studied for a foaming system containing a diluted detergent solution in a laboratory sparged agitated vessel. The change of the foam-breaking capacity of the MFRD by varying the air sparge rate, the working volume and the impeller speed or the disk diameter was measured. Based on these measurements, empirical equations are presented for predicting the critical foam-breaking regions of the MFRD fitted with the agitated vessel. The operational range where foam-breaking with the MFRD can be carried out effectively and economically is also discussed.     

Application of mushy/semi-solid joining—Part 3

A process to join glass or stone onto base metal alloys is proposed. The process characteristics allow using various kinds of glasses or stones, such as craft glass, beads, tile, amethyst, agate and hematite with different shapes and sizes. The process utilizes excellent and active join ability of mushy or semi-solid alloy’s properties. In this study, the mechanism of the joining was investigated and some applications were showed. The process itself has several useful properties like: (1) easy-to-operate, (2) ability to get good joining condition, and (3) applicability to a continuous production system. Through the study, it is found that the mushy joining is a useful and valuable manufacturing method for developing and manufacturing glass/metal or stone/metal composites. The mushy joining process is different from the existing cloisonné and enameling process.     

A wide view auto‐stereoscopic 3D display with an eye‐tracking system for enhanced horizontal viewing position and viewing distance

This paper describes the development of auto‐stereoscopic three‐dimensional (3D) display with an eye‐tracking system for not only the X‐axis (right–left) and Y‐axis (up–down) plane directions but also the Z‐axis (forward–backward) direction. In the past, the eye‐tracking 3D system for the XY‐axes plane directions that we had developed had a narrow 3D viewing space in the Z‐axis direction because of occurrence of 3D crosstalk variation on screen. The 3D crosstalk variation on screen was occurred when the viewer's eye position moved back and forth along the Z‐axis direction. The reason was that the liquid crystal (LC) barrier pitch was fixed and the LC barrier was able to control the only barrier aperture position. To solve this problem, we developed the LC barrier that is able to control the barrier pitch as well as the barrier aperture position in real time, corresponding to the viewer's eye position. As a result, the 3D viewing space has achieved to expand up to 320–1016 mm from the display surface in the Z‐axis direction and within a range of ±267 mm in the X‐axis direction. In terms of the Y‐axis direction, the viewing space is not necessary to be considered, because of a stripe‐shaped parallax barrier.     

A 63-year-old man with progressive cauda equina/conus medullaris syndrome

BACKGROUND: This article presents results of the acute treatment phase of a 2-site study comparing cognitive behavioral group therapy (CBGT) and treatment with the monoamine oxidase inhibitor phenelzine sulfate for social phobia. METHODS: One hundred thirty-three patients from 2 sites received 12 weeks of CBGT, phenelzine therapy, pill placebo administration, or educational-supportive group therapy (an attention-placebo treatment of equal credibility to CBGT). The "allegiance effect," ie, the tendency for treatments to seem most efficacious in settings of similar theoretical orientation and less efficacious in theoretically divergent settings, was also examined by comparing responses to the treatment conditions at both sites: 1 known for pharmacological treatment of anxiety disorders and the other for cognitive behavioral treatment. RESULTs: After 12 weeks, phenelzine therapy and CBGT led to superior response rates and greater change on dimensional measures than did either control condition. However, response to phenelzine therapy was more evident after 6 weeks, and phenelzine therapy was also superior to CBGT after 12 weeks on some measures. There were few differences between sites, suggesting that these treatments can be efficacious at facilities with differing theoretical allegiances. CONCLUSIONS: After 12 weeks, both phenelzine therapy and CBGT were associated with marked positive response. Although phenelzine therapy was superior to CBGT on some measures, both were more efficacious than the control conditions. More extended cognitive behavioral treatment and the combination of modalities may enhance treatment effect.     

Pressure-pulsed chemical vapour infiltration of TiN to SiC particulate preforms

SiC particulate preforms were infiltrated by TiN matrix from a gas mixture of TiCl₄ (5%), nitrogen (30%) and hydrogen using a repeating pressure pulse between 760 and about 1 torr. SiC particle sizes of 5 and 20 m were used. For matrix packing into deep level, optimum temperature was determined between 800 and 850 °C, and the maximum packing ratio reached 67% after 4 × 10⁴ pulses at 850 °C. The increase of TiCl⁴ concentration to 10% resulted in higher deposition rate and packing ratio. The decrease of nitrogen concentration led to slower deposition, that is, a similar effect to temperature lowering. The maximum flexural strength measured was 140 MPa.     

Ultra light-weight and high-resolution X-ray mirrors using DRIE and X-ray LIGA techniques for space X-ray telescopes

We are developing novel ultra light-weight and high-resolution X-ray micro pore optics for space X-ray telescopes. In our method, curvilinear micro pore structures are firstly fabricated by silicon deep reactive ion etching (DRIE) or X-ray LIGA processes. Secondly, side walls of the micro structures are smoothed by magnetic field assisted finishing and/or hydrogen annealing techniques for high reflectivity mirrors. Thirdly, to focus parallel X-ray lights from astronomical objects, these structures are elastically or plastically bent into a spherical shape. Fourthly, the bent structures are stacked to form a multi-stage X-ray telescope. In this paper, we report on fabrication and X-ray reflection tests of silicon and nickel X-ray mirrors using the DRIE and LIGA processes, respectively. For the first time, X-ray reflections were confirmed on both of the mirrors. Estimated rms roughnesses were 5 nm and 3 nm for the silicon and nickel mirrors, respectively.     

A cross-junction channel valveless-micropump with PZT actuation

A gas-jet micro pump with novel cross-junction channel has been designed and fabricated using a Si micromachining process. The valveless micro pump is composed of a piezoelectric lead zirconate titanate (PZT) diaphragm actuator and fluidic network. The design of the valveless pump focuses on a cross-junction formed by the neck of the pump chamber and one outlet and two opposite inlet channels. The structure of cross-junction allows differences in fluidic resistance and fluidic momentum inside the channels during each PZT diaphragm vibration cycle, which leads to the gas flow being rectified without valves. The flow channels were easily fabricated by using silicon etching process. To investigate the effects of the structure of the cross-junction on the gas flow rate, two types of pump with different cross-junction were studied. The design and simulation were done using ANSYS-Fluent software. The simulations and experimental data revealed that the step-nozzle structure is much more advantageous than the planar structure. A flow rate of 5.2 ml/min was obtained for the pump with step structure when the pump was driven at its resonant frequency of 7.9 kHz by a sinusoidal voltage of 50 V_p–p.     

Fabrication of sub-micron structures for MEMS using deep X-ray lithography

Fabrication techniques of microstructures with high resolution and high aspect ratio are necessary for practical microelectromechanical systems (MEMS) that have high performance and integration. In order to fabricate microstructures with sub-micron resolution and high aspect ratio, deep X-ray lithography has been investigated using the compact synchrotron radiation (SR) light source called “AURORA”. An X-ray mask for sub-micron deep X-ray lithography, which is composed of 1 μm thick Au as absorbers, 2 μm thick SiC as a membrane and 625 μm thick Si as a frame, was designed. In preliminary experiments, the following results were achieved: EB resist microstructures with an aspect ratio of 22 corresponding with 0.07 μm width and 1.3 μm height were formed; a 10 μm thick PMMA resist containing no warp was formed by direct polymerization, enabling more precise gap control.