Cloning and characterization of a 4-nitrophenol hydroxylase gene cluster from Rhodococcus sp. PN1

A 4-nitrophenol (4-NP)-degrading bacterium was isolated from activated sludge and identified as a Rhodococcus sp. This bacterium, designated as strain PN1, could utilize 4-NP as a sole carbon, nitrogen and energy source. Degradation tests of 4-NP using cell suspensions of strain PN1 revealed that the degradation was induced by 4-NP and that 4-nitrocatechol (4-NC) was one of the metabolites. A gene library was constructed from the total DNA of strain PN1 and introduced into Rhodococcus rhodochrous ATCC 12674. Two recombinant strains showed 4-NP hydroxylase activity, and a 9.1-kb DNA fragment encoding the activity was isolated from one of the strains. In addition, a 2.4-kb smaller fragment expressing the activity was subcloned from the 9.1-kb fragment and sequenced. The sequence analysis showed that the fragment encodes a two-component 4-NP hydroxylase, the predicted amino acid sequence of which exhibits significant similarity to those of phenol hydroxylases and 4-hydroxyphenylacetate 3-hydroxylases belonging to the two-component flavin diffusible monooxygenase (TC-FDM) family proposed by Galán et al. (J. Bacteriol., 182, 627-636, 2000).     

Irradiation effects of boron carbide used as control rod elements in fast breeder reactors

The paper describes radiation effects on 8₄C pellets used as control rod elements in the Enrico Fermi Fast Breeder Reactor. Pellet swelling (Δ$\text{V/V}$) caused by irradiation was less than 1% in which crystal lattice swelling was less than 20%. Many microcracks, a main cause of pellet swelling, appeared in the irradiated pellets. The production of microcracks was related to graphite precipitation in the pellets before irradiation. Open pores which did not exist in the unirradiated pellets were formed in the irradiated ones. In a unit cell of B₄C, the α-axis elongated by 0.025 Å and the $\text{c-}\text{axis}$ shrank by 0.07 Å by irradiation. Moreover, we found three recovery stages which were from room temperature to 400°C, from 400 to 750°C and from 850 to 1100°C. The recovery mechanisms in the irradiated pellets are discussed in terms of the helium behavior.     

A comparative study of microbubble generation by mechanical agitation and sonication

As focus on the potential applications of microbubbles increases, information about the efficiency of generation methods and their effects on the properties and stability of microbubbles is crucial in the selection of an appropriate method to generate microbubbles with the desired properties. This paper evaluates the generation efficiencies of two commonly used methods, mechanical agitation and sonication, in two surfactant systems. The results demonstrated that sonication was more effective than mechanical agitation in the generation of microbubbles in terms of higher gas hold-up, smaller bubble size, and larger interfacial area. Analysis of the changes in bubble size over time revealed that the existence of a critical diameter for the shrinkage of microbubbles. The behavior of microbubbles and the critical diameter depended on the generation method employed and the surfactant used.

Industrial relevance

Microbubble technology has gradually become accepted as a cost-effective and environmentally friendly technology with great potential within almost every field of the food industry. Selection of a suitable method to generate microbubbles with the desired properties is crucial. Mechanical agitation and sonication are two commonly used methods for microbubble generation. However, systematic information on their generation efficiency and effects on the properties of microbubbles is not available. Thus, a comparative study was conducted in this paper.     

Hydroboration copolymerization

Summary Organoboron copolymers were prepared by polyaddition of diene mixture or diene/diyne mixture, respectively, with thexylborane (1). When a mixture of dienes such as 1,2-diallyloxyethane (2a) and p-diallylbenzene (2b) was polymerized with 1, the peaks in GPC using both UV and RI detectors were shifted to higher molecular weight regions with the increase of the amount of 1. The molecular weight distribution of the copolymer obtained by this method indicated clear difference from that of a mixture of two homopolymers. On the other hand, when the poymerization between 1 and 1,7-octadiene (2c) was carried out in the presence of a trace amount of 1,7-octadiyne (4), the molecular weights of organoboron polymers were found to be increased when the ratio of 4/2c was increased.     

Rh/γ-Al2O3 Catalytic Layer Integrated with Sol–Gel Synthesized Microporous Silica Membrane for Compact Membrane Reactor Applications

An efficient and compact catalytic membrane reactor for reforming of CH₄ was developed by integrating a hydrogen perm-selective silica membrane with an Rh/-Al₂O₃ catalyst layer. The catalytic layer was sandwiched between the outer surface of the -Al₂O₃ support tube and the silica membrane with an aim of improving the heat and mass transfer rates through the system and to simplify the reactor geometry. The system showed improved efficiency for reforming of CH₄ at comparatively lower operating temperatures and steam to C molar ratios than the conventional fixed-bed steam reforming systems. Under optimized conditions, a nearly 25-30% improvement from the equilibrium conversion level was achieved as a result of abstraction of hydrogen from the product stream by the silica membrane integrated with the catalyst layer. The performance of the system was evaluated as a function of various process parameters. Because of the compactness and efficiency, the present system emerges as a promising alternative to the conventional membrane reactors, which possess separate catalytic and membrane units.     

Radiation tolerance of type IIa synthetic diamond detector for 14 MeV neutrons

Radiation tolerance of a type IIa synthetic diamond detector was examined from irradiation of mono-energetic 14 MeV neutrons. Measurements of I–V (current–voltage) characteristics and energy spectrum for 5.486 MeV alpha particles were performed after neutron irradiation. In the I–V characteristics measurement, enhancement of rectification was observed after neutron irradiation of up to 2.0 × 10¹² n/cm². Concurrently with the enhancement of rectification, significant decrease in signal amplitude was observed in energy spectrum measurement for alpha particles. It is considered that these changes were due to increase in the concentration of defects acting as shallow energy levels in the forbidden band. For neutron irradiation of higher than 1.6 × 10¹³ n/cm², weakening of the rectification characteristics and recovery of the signal amplitude were observed. These changes imply that deep energy levels, which were also considered to be introduced by defects, were dominant and weakened the effects of the shallow energy levels. Increase in the concentration of the deep trapping levels resulted in gradual decrease of the signal amplitude and degradation in the energy resolution. The peak for the alpha particles was obtained up to 5.5 × 10¹³ n/cm².     

Resistance to sulfur poisoning of hot gas cleaning catalysts for the removal of tar from the pyrolysis of cedar wood

In the partial oxidation of tar derived from the pyrolysis of cedar wood, the effect of H₂S addition was investigated over non-catalyst, steam reforming Ni catalyst, and Rh/CeO₂/SiO₂ using a fluidized bed reactor. In the non-catalytic gasification, the product distribution was not influenced by the presence of H₂S. Steam reforming Ni catalyst was effective for the tar removal without H₂S addition, however, the addition of H₂S deactivated drastically. In contrast, Rh/CeO₂/SiO₂ exhibited higher and more stable activity than the Ni catalyst even under the presence of high concentration of H₂S (280 ppm). On the Ni catalyst, the adsorption of sulfur was observed by XPS and Ni species was oxidized during the partial oxidation of tar. In the case of Rh/CeO₂/SiO₂, the adsorption of sulfur was below the detection limit of XPS. This can be related to the self-cleaning of catalyst surface during the circulation in the fluidized bed reactor for the partial oxidation of tar derived from cedar pyrolysis.     

Synthesis of chemically modified chitosans with a higher fatty acid glycidyl and their adsorption abilities for anionic and cationic dyes

Novel chitosan‐based materials with a higher fatty acid glycidyl as the chemically modified agent were synthesized and the adsorption ability of the resulting polymers has been evaluated for typical anionic and cationic dyes. The successful modification was confirmed by the infrared spectroscopic measurements. As the degree of substitution was decreased, the adsorption ability of the chemically modified chitosans for anionic dyes at the higher dye concentration was increased, and the modified chitosans with a lower degree of substitution showed a higher adsorption ability than that of an activated carbon at the higher dye concentration. For cationic dyes, the chemically modified chitosan showed a good adsorption power, especially when the adsorption power was evaluated by the flow methods. The improved adsorption ability of a chemically modified chitosan material was also confirmed by comparing it with that of a crosslinked chitosan material. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2423–2428, 2005