Ethylamine content of fresh tea shoots and made tea determined by high performance liquid chromatography

The ethylamine contents of tea shoots and made teas were derived with o-phthalaldehyde and 2-mercaptoethanol, and quantified by high performance liquid chromatography. The coefficient of variation of this method was 1.97% from eight analyses. The levels of ethylamine in tea shoots declined markedly during growth and senescence after plucking; they also declined in the extracts of fresh tea during the incubation at 37°C, but this decrease was completely inhibited by amine oxidase inhibitors. The content of ethylamine in high grade green teas was higher than in low grade teas, but was almost identical in high and low grade black tea. The mean contents of ethylamine in 22 green teas and 17 black teas were 6.76±3.07 μmol g^?1 and 6.40±1.82 μmol g^?1, respectively.     

A study of suppression of vapor explosions by adding inversely soluble polymers

The mechanism of the suppression of vapor explosions by adding inversely soluble polymers in water is studied. Vapor explosion experiments and quench experiment are conducted using a silver test piece. Polymetric solution (polyethylene oxide), of concentrations from 0 to 500 wppm, whose normalized viscosity (by water) varies from 1.00 to 2.00, is used. No vapor explosion is observed in the aqueous polymer solution at a concentration higher than 200 wppm. Quench experiments using the silver test piece submerged in the polymer solution and water are performed in order to examine the stability of film boiling. The suppression of the vapor film collapse is attributed to the precipitation of polyethylene as a gel around the vapor film. © 2002 Wiley Periodicals, Inc. Heat Trans Asian Res, 31(4): 297–306, 2002; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.10037     

水力机械模型试验台的设计研究

扼要介绍在水力机械模型试验台建设中,对试验台的主管路系统、流量率定系统、扭矩测量系统等进行的研究。开发了闸板可抽取式强迫压紧特殊阀,杜绝了管路内漏现象的发生;引进了模型水轮机叶片角度联调机构,在保证叶片角度调整精度的同时又提高了工作效率;采取了保持试验水质清洁的相关措施,节约了宝贵的水资源。该试验台通过了由中国电机工程学会和中国水力发电工程学会组织的技术鉴定,达到国际先进水平。     

Upgrading of X-ray CT technology for analyses of irradiated FBR MOX fuel

The X-ray CT technology previously developed by JAEA was upgraded. The shape of the X-ray source beam was changed from a circular shape to an elliptical one and the collimator slit width was decreased from 0.3 to 0.1 mm. The X-ray detector was improved by changing a CdWO₄ scintillator to a highly sensitive silicon semiconductor detector. The analysis code of X-ray CT image was revised with respect to the number of points by using two kinds of experimental results and taking into account the effects of crack existence and deviation of the central void position from the radial center of a fuel pellet. As a result, high resolution X-ray CT images could be obtained on the transverse cross section of irradiated fuel assemblies. The error of the dimensional measurement was improved from ±0.1 to ±0.03 mm by upgrading the instrument and revising the analysis code of X-ray CT image. The discriminating accuracy of density difference could be increased, and the low density region (undisturbed region) and high density region (equi-axial and columnar regions) in the X-ray CT image on the cross section of irradiated fuel could be discriminated from each other. The reliability of fuel performance analysis improves because a large number of PIE data can be collected, compared with the conventional destructive PIE.     

Resistance to sulfur poisoning of hot gas cleaning catalysts for the removal of tar from the pyrolysis of cedar wood

In the partial oxidation of tar derived from the pyrolysis of cedar wood, the effect of H₂S addition was investigated over non-catalyst, steam reforming Ni catalyst, and Rh/CeO₂/SiO₂ using a fluidized bed reactor. In the non-catalytic gasification, the product distribution was not influenced by the presence of H₂S. Steam reforming Ni catalyst was effective for the tar removal without H₂S addition, however, the addition of H₂S deactivated drastically. In contrast, Rh/CeO₂/SiO₂ exhibited higher and more stable activity than the Ni catalyst even under the presence of high concentration of H₂S (280 ppm). On the Ni catalyst, the adsorption of sulfur was observed by XPS and Ni species was oxidized during the partial oxidation of tar. In the case of Rh/CeO₂/SiO₂, the adsorption of sulfur was below the detection limit of XPS. This can be related to the self-cleaning of catalyst surface during the circulation in the fluidized bed reactor for the partial oxidation of tar derived from cedar pyrolysis.     

Gaussian process motion graph models for smooth transitions among multiple actions

We propose a unified model for human motion prior with multiple actions. Our model is generated from sample pose sequences of the multiple actions, each of which is recorded from real human motion. The sample sequences are connected to each other by synthesizing a variety of possible transitions among the different actions. For kinematically-realistic transitions, our model integrates nonlinear probabilistic latent modeling of the samples and interpolation-based synthesis of the transition paths. While naive interpolation makes unexpected poses, our model rejects them (1) by searching for smooth and short transition paths by employing the good properties of the observation and latent spaces and (2) by avoiding using samples that unexpectedly synthesize the nonsmooth interpolation. The effectiveness of the model is demonstrated with real data and its application to human pose tracking.     

An experimental study for transmitting MPEG-2 streams over ATM networks

This paper presents a comparative study of different techniques aiming at transmitting MPEG-2 streams over ATM networks, with emphasis on the presentation of practical results achieved on an experimental platform available at LSI, a laboratory of the University of São Paulo, Brazil. This study has the purpose to determine some tuning parameters for optimizing the implementation of distributed multimedia applications on different network technologies. The focus of this experimental study has been on non-native ATM techniques like “Classical IP over ATM” and “LAN Emulation”, as well as native ATM techniques based on direct access service primitives to AAL5. The influence of different parameters, like packet length, buffer size, CPU speed, on the resulting throughput has been studied. Furthermore, a testing tool is being developed for assessing the transmission of MPEG-2 streams based on the practical experience achieved so far. These results will permit the evaluation of different network technologies and also help in the development of distributed multimedia applications like video-on-demand, videoconferencing and telemedicine.     

Pb-free surface-finishing on electronic components’ terminals for Pb-free soldering assembly

Pb-free solderable surface finishing is essential to implement Pb-free solder assembly in order to meet with the growing demand of environmental consciousness to eliminate Pb from electronic products. Two types of widely applicable Pb-free surface finishing technologies are developed. One is the multilayer-system including Pd with Ni undercoat. Heat-resistance of Pd enables whole-surface-plating on to leadframe before IC-assembling process. The other is the double-layer-system with low-melting-point-materials, for example, thicker Sn underlayer and thinner Sn-Bi alloy overlayer, dilutes Sn-Bi alloy’s defects of harmful reactivity along with substrate metal and mechanical brittleness with keeping its advantages of solder-wettability and no whisker.