First-Order Phase Transition and Anomalous Hysteresis of Binary Bose Mixtures in an Optical Lattice

We study a first-order phase transition between superfluid and Mott insulator phases in binary Bose mixtures loaded into a hypercubic optical lattice. The system is described by a two-component Bose-Hubbard model. Considering the difference between the two kinds of bosons in the intra-component interaction strength, we discuss the metastability of the system and the hysteresis associated with the first-order superfluid-Mott insulator transition. It is found that the sweeping of hopping amplitude induces a conventional hysteresis-loop behavior. We also find an anomalous hysteresis behavior when the chemical potential is varied. In the anomalous hysteresis, the phase transition occurs in a unidirectional way and a hysteresis loop does not form.     

Principle and application of ball SAW devices

A thin beam of waves usually diverges due to diffraction, which is a limitation of any device using such waves. However, a surface acoustic wave (SAW) on a sphere with an appropriate aperture does not diverge but is collimated, realizing ultra‐multiple roundtrips along an equator of the sphere. This effect is caused by the balance between diffraction and focusing on a spherical surface, and it enables realization of high‐performance ball SAW sensors. © 2009 Wiley Periodicals, Inc. Electr Eng Jpn, 168(1): 41–51, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20817     

Diacetylene-containing polymers. XI. Synthesis and characterization of poly(hexa-2,4-diynylene-1,6-dioxydibenzoate) and poly(octa-3,5-diynylene-1,8-dicarboxylate) containing p-nitroaniline groups

Summary Two novel polymers containing p-nitroaniline group in the side chain and diacetylene groups in the main chain, were synthesized, and characterized. The polymers gave films of excellent optical quality by spin coating from DMF or chloroform. The one containing benzoate had a T_g of 103°C and its thermal cross-linking through the diacetylene group started at around 160°C. The one containing pentynoate had a T_g of 35°C and its cross-linking started at around 120°C. It was shown that thermosetting resins with functional groups could be obtained by using diacetylene-containing polymers. Although these two polymers have a same polar dye molecule, the second order nonlinear optical property was so different, showing that the main chains are very important for nonlinear optical property. Irradiation of UV light converted the polymer films to completely insoluble thermoset resins. Received: 13 February 2001/Revised version: 25 July 2001/Accepted: 30 July 2001     

Phase Development and Electrical Properties of Pb(Yb 1/2 Nb 1/2 )O 3 -PbTiO 3 Epitaxial Films

The growth and electrical properties of Pb(Yb 1/2 Nb 1/2 )O 3 -PbTiO 3 (PYbN-PT) epitaxial films were investigated. PYbN-PT epitaxial films with SrRuO 3 bottom electrodes were grown by pulsed laser deposition. Optimization of the growth conditions for the PYbN-PT epitaxial films was carried out on (100) SrRuO 3 /(100) LaAlO 3 substrates using the (50/50) composition target. It was found that formation of pyrochlore phase could be caused not only by low growth temperatures or lead deficiency, but also by poor surface condition of the SrRuO 3 bottom electrodes. (001) PYbN-PT epitaxial films with good crystalline quality were obtained for a range of deposition rates (60-100 nm/min) and temperatures (620-680 °C) after vacuum annealing the SrRuO 3 bottom electrodes. The ferroelectric and piezoelectric properties of 1 w m-thick PYbN-PT epitaxial films with (50/50) and (60/40) compositions and with (001) and (111) orientations were investigated using (100) LaAlO 3 , (100) SrTiO 3 , and (111) SrTiO 3 substrates with SrRuO 3 bottom electrodes. The highest remanent polarization (29 w C/cm 2 ) and effective piezoelectric coefficient e 31.f ( m 14 C/m 2 ) were observed in the (001) PYbN-PT (50/50) film. The transition temperature of the (001) PYbN-PT (50/50) film was about 380 °C. Because of the degradation of the target during the deposition, a 3 w m-thick film was prepared by three depositions (1 w m each layer). The 3 w m-thick film exhibited a higher e 31.f coefficient of m 19 C/m 2.     

Cationic polymerization behavior of β‐methylglycidyl ether derivatives and physical properties of their cationically cured materials

β‐Methylglycidyl ethers have been applied to Electrical and Electronic adhesives. However, there is no report about the detailed polymerization behavior and physical properties of their cured products. Hence, we investigated cationic polymerization behavior of bisphenol A di(β‐methylglycidyl) ether (Me‐BADGE) and physical properties of the cured products containing Me‐BADGE. DSC analysis suggested that Me‐BADGE could be cured completely at lower temperature than bisphenol A diglycidyl ether (BADGE). Physical properties were analyzed by dynamic viscoelastic analysis. Glass transition temperature (T_g) of BADGE homopolymer was 194°C. In contrast, the copolymer of BADGE (50 wt %) with Me‐BADGE (50 wt %) showed T_g at 124°C. According to the data of E’ and tan δ, crosslink density of the cured products decreased with increasing the Me‐BADGE content. The analysis of cationic polymerization of monofunctional β‐methylglycidyl ether suggested that the cationic polymerization proceeded not only through oxonium cation but also through carbocation formed by ring‐opening reaction of oxonium cation. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42377.     

Effects of supercritical carbon dioxide treatment on the morphology of poly(l‐lactide)

Synthetic l ‐lactide random copolymers can be employed as controlled release materials when prepared using supercritical carbon dioxide (scCO₂), since they are biodegradable via hydrolysis. To determine the effects of thermal properties on polymer performance following scCO₂ processing, three types of poly(l ‐lactide) having different properties were assessed. The T_m of one poly(l ‐lactide) sample (H‐100) was found to be approximately 170 °C over the processing pressure range from 8 to 18 MPa, while a second sample (H‐440) also showed a constant value of approximately 152 °C. In contrast, the poly(l ‐lactide) REVODE exhibited a T_m of 146 °C prior to processing but a higher value of 147 °C following treatment at 8 MPa. Unlike the H‐100 and H‐440, the T_m value of the REVODE tended to decrease with increasing pressure. The T_g values increased greatly under mild conditions of 8 MPa pressure and a temperature of 40 °C. In particular, the T_g values for the H‐440 and REVODE increased by 4 °C and 5 °C, respectively. All T_g values were lowest at 12 MPa and increased with increasing processing pressure, although the effect of processing temperature was minimal. The Χ_{c DSC} of the H‐100 was 18% initially but increased to 20% upon scCO₂ processing at 40 °C and 14 MPa, and showed further increases at higher processing temperatures. Although the relationship between processing temperature and Χ_{c DSC} values for the H‐440 showed the same trend as observed with the H‐100, a different trend was seen for the REVODE. The Χ_{c XRD} values obtained from the XRD analyses differed from the values generated by DSC analysis, and showed a maximum degree of crystallinity following processing at 80 °C both with and without scCO₂ treatment. ATR FT‐IR analyses identified peaks due to semicrystalline regions in poly(l ‐lactide) samples treated with scCO₂, even when applying low temperatures. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44006.     

A decision theoretic approach to change point estimation for binomial CUSUM control charts

Detecting when the process has changed is a classical problem in sequential analysis and is an important practical issue in statistical process control. This article is concerned about the binomial cumulative sum (CUSUM) control chart, which is extensively applied to industrial process control, health care, public health surveillance, and other fields. For the binomial CUSUM, a maximum likelihood estimator has been proposed to estimate the change point. In our article, following a decision theoretic approach, we develop a new estimator that aims to improve the existing methods. For interval estimation, we propose a parametric bootstrap procedure to construct the confidence set of the change point. We compare our proposed method with the maximum likelihood estimator and Page's last zero estimator in terms of mean squared error by simulations. We find that the proposed method gives more unbiased and robust results than the existing procedures under various parameter designs. We analyze jewelry manufacturing data for illustration.     

Surface Analysis of Cr2O3‐, CoO‐, and Al2O3‐Doped Iron–Phosphate Glasses at High Temperature

Surface structures of iron–phosphate glasses were examined using X‐ray photoelectron spectroscopy (XPS). Cr₂O₃, CoO, and Al₂O₃ were introduced to the glass by the replacement of a part of Fe₂O₃, and the simulated fission products are also added. The obtained glasses showed high chemical durabilities by MCC‐1 test. In situ high‐temperature and room‐temperature XPS measurements were conducted on the polished sample surfaces and also those after 1‐week chemical durability test. Unique trends were observed in XPS spectra on heating and after the chemical durability test, respectively. Nature of the glass surface of iron–phosphate glasses was explained from the point of view of surface energy, and the origin of high chemical durability and the effect of chromium ions were discussed based on the changes on surface composition and valence states of transition‐metal ions.