Mechanical properties and morphological changes of poly(lactic acid)/polycarbonate/poly(butylene adipate‐co‐terephthalate) blend through reactive processing

The mechanical properties and morphological changes of poly(lactic acid) (PLA), polycarbonate (PC), and poly(butylene adipate‐co‐terephthalate) (PBAT) polymer blends were investigated. Several types of blend samples were prepared by reactive processing (RP) with a twin‐screw extruder using dicumyl peroxide (DCP) as a radical initiator. Dynamic mechanical analyses (DMA) of binary polymer blends of PC/PBAT indicated that each component was miscible over a wide range of PC/PBAT mixing ratios. DMA of PLA/PBAT/PC ternary blends revealed that PBAT is miscible with PC even in the case of ternary blend system and the miscibility of PLA and PBAT can also be modified through RP. As a result, the tensile strain and impact strength of the ternary blends was increased considerably through RP, especially for PLA/PBAT/PC = 42/18/40 (wt/wt/wt) with DCP (0.3 phr). Scanning electron microscopy (SEM) analysis of the PLA/PBAT/PC blends revealed many small spherical island phases with a domain size of approximately 0.05–1 μm for RP, whereas it was approximately 10 μm without RP. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Measurements of fiber bundle interfacial properties of three-dimensionally reinforced carbon/carbon composites up to 2273 K

Experimental techniques for evaluating the interfacial properties between fiber bundles and the matrix of three-dimensionally reinforced carbon/carbon composites were examined. Specially arranged fiber bundle push-out and pull-out tests were conducted up to 2273 K in vacuum. In these tests, a fiber bundle in the specimens was extruded or pulled out by external compressive or tensile loads. Post-fracture observations revealed that a shear fracture was successfully induced within the carbon matrices at the loaded fiber bundle interface. The interfacial shear strength and initial sliding stress of the fiber bundle monotonically increased with the test temperature. The relief of residual thermal stress and increases in the frictional resistance and anchor effect at the fiber bundle interface were considered to be the major mechanisms that caused the enhancements. An increase in the heat treatment temperature during the processing of the composites resulted in a significant decrease in and .     

Preparation of CaCO3‐based biomineralized polyvinylpyrrolidone–carboxymethylcellulose hydrogels and their viscoelastic behavior

In the blend of natural and synthetic polymer‐based biomaterial of polyvinylpyrrolidone (PVP) and carboxymethylcellulose (CMC), fabrication of CaCO₃ was successfully accomplished using simple liquid diffusion technique. The present study emphasizes the biomimetic mineralization in PVP–CMC hydrogel, and furthermore, several properties of this regenerated and functionalized hydrogel membranes were investigated. The physical properties were studied and confirmed the presence of CaCO₃ mineral in hydrogel by Fourier transform infrared spectroscopy and Scanning electron microscopy. Moreover, the absorptivity of water and mineral by PVP–CMC hydrogel was studied to determine its absorption capacity. Further, the viscoelastic properties (storage modulus, loss modulus, and complex viscosity) of mineralized and swelled samples (time: 5–150 min) were measured against angular frequency. It is interesting to know the increase of elastic nature of mineralized hydrogel filled with CaCO₃ maintaining the correlation between elastic property and viscous one of pure hydrogel. All these properties of biomineralized hydrogel suggest its application in biomedical field, like bone treatment, bone tissue regeneration, dental plaque and tissue replacement, etc. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40237.     

Response of Predatory Insect Scolothrips takahashii Toward Herbivore-Induced Plant Volatiles Under Laboratory and Field Conditions

We studied the response of a predatory thrips, Scolothrips takahashii, towards herbivore-induced plant volatiles emitted by Lima bean plants infested by two-spotted spider mites Tetranychus urticae (green form). Tests were conducted with a Y-tube olfactometer in the laboratory and with traps under field conditions. The odor of artificially damaged and uninfested Lima bean leaves was not more attractive than clean air in the Y-tube olfactometer. The predatory insects showed a greater preference for Lima bean leaves infested by the two-spotted spider mites than for either clean air or uninfested bean leaves. They showed the same preference towards infested leaves from which all spider mites and their visible products had been removed. Neither the spider mites themselves nor their products attracted the predators. In a satsuma mandarin grove, two traps with infested Lima bean plants as an odor source attracted 42 adult S. takahashii in 55 days, whereas no S. takahashii were trapped in two control traps with uninfested Lima bean plants during the same period. No S. takahashii were found during this period in the vicinity of either the sample traps or the control traps (5-m radius of each trap). These data showed that S. takahashii use herbivore-induced plant volatiles in their foraging behavior in natural ecosystems.     

Structural Analysis of the Complex between Penta-EF-Hand ALG-2 Protein and Sec31A Peptide Reveals a Novel Target Recognition Mechanism of ALG-2

ALG-2, a 22-kDa penta-EF-hand protein, is involved in cell death, signal transduction, membrane trafficking, etc., by interacting with various proteins in mammalian cells in a Ca²⁺-dependent manner. Most known ALG-2-interacting proteins contain proline-rich regions in which either PPYPXnYP (type 1 motif) or PXPGF (type 2 motif) is commonly found. Previous X-ray crystal structural analysis of the complex between ALG-2 and an ALIX peptide revealed that the peptide binds to the two hydrophobic pockets. In the present study, we resolved the crystal structure of the complex between ALG-2 and a peptide of Sec31A (outer shell component of coat complex II, COPII; containing the type 2 motif) and found that the peptide binds to the third hydrophobic pocket (Pocket 3). While amino acid substitution of Phe⁸⁵, a Pocket 3 residue, with Ala abrogated the interaction with Sec31A, it did not affect the interaction with ALIX. On the other hand, amino acid substitution of Tyr¹⁸⁰, a Pocket 1 residue, with Ala caused loss of binding to ALIX, but maintained binding to Sec31A. We conclude that ALG-2 recognizes two types of motifs at different hydrophobic surfaces. Furthermore, based on the results of serial mutational analysis of the ALG-2-binding sites in Sec31A, the type 2 motif was newly defined.     

Rearrangement of the main chain of the organocobalt polymers

The polymers 3 having pyridine moieties in the main chain were synthesized by the reaction of the organocobalt polymers 1 having cobaltacyclopentadiene moieties in the main chain with various nitriles 2. When brown colored 1 and excess 2 were heated in tetrahydrofuran at 80 °C for 24 h and then at 150 °C for 12 h in a sealed tube, the polymers 3 were obtained by the precipitation with methanol in good yields. From the spectroscopic measurements, the resulting polymers 3 were found to contain 35 – 90% of the pyridine moieties depending on the structures of 1. Received: 7 July 1997/Revised: 14 August 1997/Accepted: 25 August 1997     

Prediction of the biologically active sites in eclosion hormone from the silkworm, Bombyx mori

The structure-activity relationship of eclosion hormone from the silkworm, Bombyx mori, was analyzed. First, the probable active residues in silkworm eclosion hormone and also tobacco hornworm eclosion hormone were predicted by the average distance map method. To examine the contributions of those residues to the activity of silkworm eclosion hormone, Gly-substituted mutants for those predicted residues were produced by site-directed mutagenesis and their activities were evaluated by a bioassay. Finally, Glu12, Met24 and Phe25 were estimated to be the crucial residues for the eclosion hormone activity. The possibility of the development of a blocker of an eclosion hormone receptor on the basis of the present work is also discussed.      

Fiber structure formation in ultra-high-speed melt spinning of poly(ethylene 2,6-naphthalene dicarboxylate)

The high-speed melt spinning of poly(ethylene 2,6-naphthalene dicarboxylate) (PEN) was performed up to the take-up velocity of the ultra-high-speed region, 9 km/min. From the investigations of the structure and physical properties of the as-spun fibers, the high-speed spinning of PEN was divided into three regions in terms of the mechanism of fiber structure formation. The first region is the take-up velocity of up to 2.5 km/min and the birefringence of up to 0.08 where only a slight increase in molecular orientation was attained. At the take-up velocity of 2.5–4.5 km/min and the birefringence of 0.08–0.25, although some experimental evidences indicated that the orientation-induced crystallization did not occur, there was an increase in the fiber density which suggested the formation of some ordered structure. At the take-up velocity > 4.5 km/min and birefringence > 0.25, the orientation-induced crystallization occurred. The fibers obtained in this region were characterized by the formation of the crystalline structure dominated by the β form. The presence of the necklike deformation in the spinning line was also confirmed. The solidification temperature of the spinning line analyzed from the diameter profile suggested that the formation of β modification crystals occurred at relatively low crystallization temperatures in comparison with that in an isotropic state. Therefore it was indicated that the presence of elongational stress in the spinning line promoted the formation of the β modification crystals. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 65: 1415–1427, 1997     

Mutations Associated with Functional Disorder of Xanthine Oxidoreductase and Hereditary Xanthinuria in Humans

Xanthine oxidoreductase (XOR) catalyzes the conversion of hypoxanthine to xanthine and xanthine to uric acid with concomitant reduction of either NAD⁺ or O₂. The enzyme is a target of drugs to treat hyperuricemia, gout and reactive oxygen-related diseases. Human diseases associated with genetically determined dysfunction of XOR are termed xanthinuria, because of the excretion of xanthine in urine. Xanthinuria is classified into two subtypes, type I and type II. Type I xanthinuria involves XOR deficiency due to genetic defect of XOR, whereas type II xanthinuria involves dual deficiency of XOR and aldehyde oxidase (AO, a molybdoflavo enzyme similar to XOR) due to genetic defect in the molybdenum cofactor sulfurase. Molybdenum cofactor deficiency is associated with triple deficiency of XOR, AO and sulfite oxidase, due to defective synthesis of molybdopterin, which is a precursor of molybdenum cofactor for all three enzymes. The present review focuses on mutation or chemical modification studies of mammalian XOR, as well as on XOR mutations identified in humans, aimed at understanding the reaction mechanism of XOR and the relevance of mutated XORs as models to estimate the possible side effects of clinical application of XOR inhibitors.     

2-[1-(2,6-Dibenzhydryl-4-chlorophenylimino)ethyl]-6-[1-(arylimino)ethyl]pyridyliron(II) dichlorides: Synthesis,characterization and ethylene polymerization behavior

A series of 2-[1-(2,6-dibenzhydryl-4-chlorophenylimino)ethyl]-6-[1-(arylimino)ethyl]pyridine ligands (L1–L5) as well as the ligand 2,6-bis[1-(2,6-dibenzhydryl-4-chloro-phenylimino)ethyl]pyridine (L6) were synthesized and reacted with FeCl₂·4H₂O to afford the iron(II) dichloride complexes [LFeCl₂] (Fe1–Fe6). All new compounds were fully characterized by elemental and spectroscopic analysis, and the molecular structures of the complexes Fe1, Fe2 and Fe4 were determined by single-crystal X-ray diffraction, which revealed a pseudo-square-pyramidal geometry at iron. Upon activation with either MAO or MMAO, all iron pre-catalysts exhibited very high activity in ethylene polymerization with good thermal stability. To the best of our knowledge, the current system showed the highest activity amongst iron bis(imino)pyridine pre-catalysts reported to-date. The polymerization parameters were explored to determine the optimum conditions for catalytic activity, which were typically found to be 2500 eq. Al to Fe at 60 °C in the presence of MMAO, and 80 °C in the presence of MAO. The resultant polyethylene possessed a narrow molecular polydispersity index (PDI) consistent with the formation of single-site active species.