Discussion on framework of radon management strategy in various environments

Activities on radon management strategy of international organisations (International Atomic Energy Agency, International Commission on Radiation Protection, etc.) should be carefully and continuously traced to discuss how to control radon in various environments, for example, dwellings, workplace, underground, caves, mines, hot springs, disposal facilities and so on. It is more reasonable in parallel to set radon reference level by effective dose criteria of Sv y(-1) as well as by radon concentration in air of Bq m(-3). How to investigate radon concentration in each environment, and how to make decisions on needed action for radiation protection from natural radon,--these should be discussed for each environmental situation on a case-by-case basis. International discussion as well as domestic discussion is continuously needed, not only among the radon specialists and regulators, but also including stakeholders who are the main users of regulation and guidance.     

Dose evaluation from multiple detector outputs using convex optimisation

A dose evaluation using multiple radiation detectors can be improved by the convex optimisation method. It enables flexible dose evaluation corresponding to the actual radiation energy spectrum. An application to the neutron ambient dose equivalent evaluation is investigated using a mixed-gas proportional counter. The convex derives the certain neutron ambient dose with certain width corresponding to the true neutron energy spectrum. The range of the evaluated dose is comparable to the error of conventional neutron dose measurement equipments. An application to the neutron individual dose equivalent measurement is also investigated. Convexes of particular dosemeter combinations evaluate the individual dose equivalent better than the dose evaluation of a single dosemeter. The combinations of dosemeters with high orthogonality of their response characteristics tend to provide a good suitability for dose evaluation.     

Preparation of multilayered organic-inorganic hybrid core-shell particles by stepwise surface formation

This paper introduces a stepwise formation method for micro-sized, multilayered core-shell particles comprising an inorganic core, organic inner shell, and inorganic outer shell. A silica core was coated with a polystyrene seed layer, followed by surface seed polymerization with styrene, to afford the inner shell. These particles were then coated with a silica outer shell by a surface sol-gel reaction with tetraethoxysilane. The versatility of this combined surface seed polymerization and sol-gel method is emphasized by the precise control achieved over particle diameter as well as shell thickness and count. Moreover, the organic inner shell can be readily eliminated to afford a single-core-containing micro-capsular structure.     

Photoluminescence from chemically exfoliated MoS2

A two-dimensional crystal of molybdenum disulfide (MoS2) monolayer is a photoluminescent direct gap semiconductor in striking contrast to its bulk counterpart. Exfoliation of bulk MoS2 via Li intercalation is an attractive route to large-scale synthesis of monolayer crystals. However, this method results in loss of pristine semiconducting properties of MoS2 due to structural changes that occur during Li intercalation. Here, we report structural and electronic properties of chemically exfoliated MoS2. The metastable metallic phase that emerges from Li intercalation was found to dominate the properties of as-exfoliated material, but mild annealing leads to gradual restoration of the semiconducting phase. Above an annealing temperature of 300 °C, chemically exfoliated MoS2 exhibit prominent band gap photoluminescence, similar to mechanically exfoliated monolayers, indicating that their semiconducting properties are largely restored.     

Structure and magnetic properties of mono- and bi-layer graphene films on ultraprecision figured 4H-SiC(0001) surfaces

Monolayer and bilayer graphene films with a few hundred nm domain size were grown on ultraprecision figured 4H-SiC(0001) on-axis and 8 degrees -off surfaces by annealing in ultra-high vacuum. Using X-ray photoelectron spectroscopy (XPS), atomic force microscopy, reflection high-energy electron diffraction, low-energy electron diffraction (LEED), Raman spectroscopy, and scanning tunneling microscopy, we investigated the structure, number of graphene layers, and chemical bonding of the graphene surfaces. Moreover, the magnetic property of the monolayer graphene was studied using in-situ surface magneto-optic Kerr effect at 40 K. LEED spots intensity distribution and XPS spectra for monolayer and bilayer graphene films could become an obvious and accurate fingerprint for the determination of graphene film thickness on SiC surface.     

Kinetic model of algal growth incorporating intracellular carbohydrate and phosphorus pools

A series of studies on a kinetic model of photosynthesis, nutrient ingestion, and metabolism for algal growth were conducted. Coefficients included in the proposed model were examined referring to experimental data on growth of Chlorella sp. It was shown that the proposed model can simulate the mechanism of algal growth, change of intracellular phosphorus content, change of intracellular carbohydrate content, and effects of nutrients on algal growth.     

Development of bullous pemphigoid after change of dialysis membrane

A 75‐year‐old Japanese man presented with pruritic blisters and macules on his trunk and extremities. He had been on hemodialysis for 4 years because of chronic renal failure, and in recent months, a polymethylmethacrylate membrane had been used for dialysis. After a change in dialysis membrane to a cellulose triacetate membrane, pruritic tense blisters developed on the extremities in combination with marked blood eosinophilia. Physical examination showed erythematous macules and tense blisters on the trunk and extremities. A biopsy specimen of an erythematous macule showed subepidermal vesicles and eosinophils that attached to the dermal–epidermal junction. Serum level of eosinophilic cationic protein was elevated. From clinical, histological, and immunological findings, a diagnosis of bullous pemphigoid was made. New blisters continued to erupt during the period in which the patient used the cellulose triacetate membrane dialyzer, and even after the use of clobetasol propionate. It resolved only after the patient came back to the use of a synthetic membrane dialyzer. We discontinued the use of clobetasol propionate, and neither bullous eruptions nor blood eosinophilia recurred. These observations suggest that cellulose membrane may be involved in the development of bullous pemphigoid through activation of eosinophils in the blood and the skin lesion, as in the present case.     

Recent progress of high performance polymer OLED and OPV materials for organic printed electronics

The development of organic printed electronics has been expanding to a variety of applications and is expected to bring innovations to our future life. Along with this trend, high performance organic materials with cost-efficient fabrication processes and specific features such as thin, light weight, bendable, and low power consumption are required. A variety of organic materials have been investigated in the development of this field. The basic guidelines for material design and the recent progress of polymer-based organic light-emitting diodes (OLEDs) and organic photovoltaic cells (OPVs) are reported.