Reverse osmosis separations of polyethylene glycols in dilute aqueous solutions using porous cellulose acetate membranes

Reverse osmosis separations of eight polyethylene glycol (PEG) solutes in the average molecular weight range of 200 to 6750 in single-solute dilute aqueous solutions have been studied using porous cellulose acetate membranes at the operating pressures of 50, 75, and 100 psig. Diffusivity data for the above PEG solutes have also been obtained from experimental data on intrinsic viscosities. From an analysis of all experimental data, numerical values for the parameters representing the polar (?ΔΔG/RT), steric (δ^*ΣE_s), and nonpolar (ω^*Σs^*) forces governing reverse osmosis separations of PEG solutes have been generated. These numerical values are useful for precise characterization of cellulose acetate membranes for whose specifications sodium chloride is not the appropriate reference solute because of its low or practically negligible separation under reverse osmosis operating conditions. This work also illustrates that solute separation in reverse osmosis can predictably increase or decrease with increase in operating pressure depending on experimental conditions.     

Effect of compressive and tensile strains on the electrical resistivity of carbon microcoil/silicone-rubber composites

Spring-shaped carbon microcoils (CMCs) were embedded in silicone-rubber to form CMC/silicone-rubber composites. The electrical and mechanical properties of the composites were examined and compared with those of the composites involving straight carbon nanofibers and carbon blacks as a conductor. The electrical resistivity of the CMC/silicone-rubber composites decreased dramatically by increasing the CMC content and was as low as 100 Ω cm at 10% CMC volume content. With a compressive or tensile strain, the resistivity increased sharply much more than that of the other composites. The high resistive sensitivity of the composites is ascribed to an easy-to-deform configuration of the CMCs in the composites under an applied stress.     

Hydrothermal Formation of Hydroxyapatite Layers on the Surface of Type-A Zeolite

Type-A zeolite evenly covered with hydroxyapatite thin layers was prepared using hydrothermal treatment at 120°C for 8 h under autogenous pressure. The hydroxyapatite needlelike nanocrystals, 100–200 nm in diameter and 30 nm in thickness, were grown under the reaction between discharged Ca²⁺ ions from type-A zeolite and PO₄³⁻ ions in (NH₄)₃PO₄ solution. The preferential orientations of the c -axis of hydroxyapatite crystals perpendicular to a zeolite surface were observed using transmission electron microscopy. The crystal structure of type-A zeolite was not destroyed under the reaction, but the surface morphology was changed only with complete covering of scaly hydroxyapatite particles.     

Color ellipsoscope for real-time imaging of nanometer-scale surface phenomena

An imaging method was developed based on null ellipsometry with a white-light source. It is useful for visualizing the kinetics of fast surface phenomena on the nanometer scale.     

A coaxial pulsed plasma thruster using chemical propellants

Pulsed plasma thrusters (PPTs) have the advantages of mechanical simplicity and robustness compared to other electric propulsion systems. However the thrust power ratio of PPTs is lower than that of other electric propulsion systems. To enhance the thrust performance of the PPT, we propose to use several combustible solid chemicals as coaxial PPT propellants to replace Teflon^® (Polytetrafluoroethylene: PTFE). With the design, the force obtained thermodynamically is expected to augment the PPT thrust power ratio with the help of the chemical energy contained in the propellants. As a result, the thrust power ratio is increased using hydroxyl-terminated polybutadiene-ammonium perchlorate (HTPB-AP)-based propellants compared to the case of ordinary Teflon. The discharge current and voltage waveform does not change even when the propellant is changed. These findings could indicate that the impulse bits by gasdynamic contribution are lager in the case of chemical solid propellants than in the case of Teflon.     

Plan for first phase of safety demonstration tests of the High Temperature Engineering Test Reactor (HTTR)

Safety demonstration tests using the High Temperature Engineering Test Reactor (HTTR) will be conducted for the purpose of demonstrating inherent safety features of High Temperature Gas-cooled Reactors (HTGRs) as well as providing the core and plant transient data for validation of HTGR safety analysis codes. The first phase safety demonstration test items include the reactivity insertion test and the coolant flow reduction test. In the reactivity insertion test, which is the control rod withdrawal test, one pair out of 16 pairs of control rods is withdrawn, simulating a reactivity insertion event. The coolant flow reduction test consists of the partial loss of coolant flow test and the gas circulators trip test. In the partial loss of coolant flow test, primary coolant flow rate is slightly reduced by control system. In the gas circulators trip test one and two out of three gas circulators are run down, simulating coolant flow reduction events. The gas circulators trip tests, in which position of control rods are kept unchanged, are simulation tests of anticipated transients without scram (ATWS).     

Mutated KIT Tyrosine Kinase as a Novel Molecular Target in Acute Myeloid Leukemia

KIT is a type-III receptor tyrosine kinase that contributes to cell signaling in various cells. Since KIT is activated by overexpression or mutation and plays an important role in the development of some cancers, such as gastrointestinal stromal tumors and mast cell disease, molecular therapies targeting KIT mutations are being developed. In acute myeloid leukemia (AML), genome profiling via next-generation sequencing has shown that several genes that are mutated in patients with AML impact patients’ prognosis. Moreover, it was suggested that precision-medicine-based treatment using genomic data will improve treatment outcomes for AML patients. This paper presents (1) previous studies regarding the role of KIT mutations in AML, (2) the data in AML with KIT mutations from the HM-SCREEN-Japan-01 study, a genome profiling study for patients newly diagnosed with AML who are unsuitable for the standard first-line treatment (unfit) or have relapsed/refractory AML, and (3) new therapies targeting KIT mutations, such as tyrosine kinase inhibitors and heat shock protein 90 inhibitors. In this era when genome profiling via next-generation sequencing is becoming more common, KIT mutations are attractive novel molecular targets in AML.     

Studies on Effective Utilization of SOFC Exhaust Heat Using Thermoelectric Power Generation Technology

Solid oxide fuel cells (SOFCs) are being researched around the world. In Japan, a compact SOFC system with rated alternative current (AC) power of 700 W has become available on the market, since the base load electricity demand for a standard home is said to be less than 700 W AC. To improve the generating efficiency of SOFC systems in the 700-W class, we focused on thermoelectric generation (TEG) technology, since there are a lot of temperature gradients in the system. Analysis based on simulations indicated the possibility of introducing thermoelectric generation at the air preheater, steam generator, and exhaust outlet. Among these options, incorporating a TEG heat exchanger comprising multiple CoSb₃/SiGe-based TEG modules into the air preheater had potential to produce additional output of 37.5 W and an improvement in generating efficiency from 46% to 48.5%. Furthermore, by introducing thermoelectric generation at the other two locations, an increase in maximum output of more than 50 W and generating efficiency of 50% can be anticipated.     

Conceptual design of rain radar for the tropical rainfall measuring mission

Specifications for a spaceborne rain radar for tropical rainfall measurement are described. A spaceborne rain radar has problems peculiar to rain observation from space. The radar must have a fast scanning mechanism to cover a large swath. Very weak rain echoes compared to the sea or land surface signal must be detected. These capabilities must be attained under the severe power consumption and mass limitations of the satellite bus. The fast scanning requirement forces application of an electrically scanning mechanism. This requirement also causes a severe limitation of the available number of independent samples. The requirement for weak rain echoes excludes application of the pulse compression technique, which is a very conventional technique for other active microwave sensors on board satellites. Under these constraints, a rain radar with an electrically scanning planar antenna at 13-8 GHz is proposed.