Solving regularized least squares with qualitatively controlled adaptive cross‐approximated matrices

The adaptive cross‐approximation (ACA) technique is applied to accelerating an inverse‐problem solver that estimates charge distribution on a dielectric spacer. The ACA generates an approximated system‐matrix that enables us to carry out high‐speed inverse calculation. We designed an approximation procedure based on ACA with some additional concepts, that is, (a) partitioning of matrix based on algebraic information, (b) approximation quality control based on matrix norms, and so on. The tested solver (LSQR for regularized least squares) with ACA demonstrates about 10 times faster performance than that without ACA. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 159(3): 10–18, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20326     

Safety evaluation on the depressurization accident in the gas turbine high temperature reactor (GTHTR300)

Japan Atomic Energy Agency has been developing a gas turbine high temperature reactor (GTHTR300) with electric power of approximately 300 MW. One of the unique safety design concepts of this system is that events with frequency of occurrence of higher than 10⁻⁸/reactor-year are evaluated as design basis events in order to show that the frequency of large amount of FP release is less than 10⁻⁸/reactor-year. According to this concept, a depressurization accident by a large break of helium piping is postulated as a design basis event. This accident is one of the most serious accidents in the high-temperature gas-cooled reactors from the viewpoint of loss of coolability. The safety evaluation on the accident was conducted based on the actual design of the system. The short-term and long-term behaviors of fuel temperature after occurrence of the accident, internal pressure of the reactor building, oxidation behavior of fuels and graphite structures were evaluated and exposure dose of general public was also estimated using the results of evaluation of fuel temperature and fuel failure by oxidation. All of the evaluation results meet the safety criteria and feasibility of the GTHTR300 was shown by this study.     

Theory and characteristics of novel variable reluctance 1X resolver

Although brushless resolvers have been used widely as angular position transducers, they are expensive due to their intricate construction, involving a rotary transformer to supply the exciting coils wound on the rotor poles with the current. It is shown theoretically in this paper that the resolver without rotary transformer or brushes can be realized by simple construction, which consists of the stator core with both 4-poles exciting windings and 2-poles output ones and the rotor core carrying no windings. In this resolver the rotor core has minimum gap at one side and a maximum gap at another side of the diameter. It is characterized by an outer surface form that makes the fluctuation part of gap permeance very in proportion to cos θ, where θ represents the angular position of a point in the air gap with respect to the origin on the rotor, the point of minimum air gap. The method determining the rotor form to embody the aforementioned gap permeance variation is also shown. It has been confirmed not only by simulation but also experiment that the 2-phase output voltages of a model designed based on the theory have sinusoidal waveforms with very small harmonic contents. Moreover, the rotor position detected by processing the output voltages through the conventional resolver/digital converter was within acceptable engineering accuracy.     

碳钢高温变形后的静态软化行为

在形变温度为1133K、形变速率为2×10~(-3)s~(-1)的试验条件下,采用两段加载拉伸试验方法研究了0.4%C-1.5%Mn钢高温变形后的静态软化行为.调查了由两次加载拉伸变形时的屈服应力求得的静态软化率以及相对峰值应力比和峰值应变比随等温保持时间的变化.详细讨论了动态回复组织和动态再结晶组织对高温变形后的静态软化过程的影响.     

A simplified cascade current‐source inverter interconnected to a single‐phase three‐wire distribution system and its application to electric energy storage systems with batteries

A novel current source inverter system interconnected to the single‐phase grid is proposed. It has the same construction as the conventional three‐phase current source inverter that is interconnected to the single‐phase three‐wire distribution system. Though the proposed circuit has no output transformer, it can be equivalently performed as the single‐phase double cascade inverter by diverting the pole transformer in the utility system. By controlling the appropriate scheme, the output currents can be obtained as the five‐level waveforms and their distortions can be decreased sufficiently. It is applied to the interactive electric energy storage system with batteries and the basic discharging characteristics are discussed experimentally. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(2): 50–61, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10380     

Optical Energy Gap and Below Gap Optical Absorption of Fullerene Films Measured by the Constant Photocurrent Method and Photothermal Deflection Spectroscopy

The CPM spectra of fullerene films was measured to obtain the below gap absorption. The optical energy gap E_o was obtained by using the Tauc's plots. E_o did not change greatly with intercalated impurities. The absorption due to intercalated impurities was found below 1.6eV.     

Sialon formation by Si+ and N2 + ion implantation into sapphire

Single-crystal alumina was implanted firstly with 400 keV Si⁺ and subsequently with N₂ ⁺ ions and then annealed at 1673 K in an No atmosphre. The implanted layers were characterized by means of X-ray diffraction, Rutherford backscattering-channelling of 2 MeV He⁺ ions, and the resonance nuclear reaction¹⁵N(p,)¹²C. The annealing of sapphire implanted at ambient temperature resulted in the formation of-sialon, a solid solution of-silicon nitride and alumina in the subsurface layer, while implantation at 100 K resulted in the formation of aluminium oxynitride in the surface layer. In the latter case, the implanted silicon atoms were believed not to react vxi1h the implanted nitrogen atoms but with the substrate oxygen atoms. These crystalline precipitates were found to have epitaxial relations with the sapphire substrate.     

Synthesis of terpene alcohols from isoprene oligomers

Various terpene alcohols were prepared from isoprene oligomers via two steps: epoxidation with peracetic acid and isomerisation with aluminium triisopropoxide. For example, 2-methylene-6-methyl-7-octene-1-o1 was prepared from 2,6-dimethyl-1,7-octadiene. From 2,6-dimethyl-2,7-octadiene, 3,3,6-trimethyl-1,5-heptadiene, 2,7-dimethyl-2,6-octadiene, 2,6-dimethyl-1,3,6-octatriene, 1-methyl-4-isopropenyl-1-cyclohexene, and 1,5-dimethyl-1,5-cyclooctadiene, the corresponding alcohols were obtained, respectively.     

Comparison of selective cytotoxicity of alkyl lysophospholipids

Alkyl lysophospholipids have been shown to be cytooxic to a number of neoplastic tissues. One, ET-18-OCH₃, has been used to selectively purge leukemic cells from mixtures with normal marrow progenitor cells,in vitro andin vivo. We have measured the 50% inhibitory (IC₅₀) effect of a series of ether, lipids (EL) on leukemic cells (HL60, K562, Daudi, KG-1, KG-1a) and normal marrow progenitor cells. Cells were incubated with varying concentrations of EL for 4 hr and assayed for viability, [³H]thymidine incorporation and clonogenicity in semi-solid media. The effect on protein kinase C (PKC) activity was assayed for each compound. Compounds tested included three glycerophosphocholine analogs-ET-18-OCH₃, ET-16-NHCOCH₃, and BM 41.440. In addition, a lipoidal amine, CP 46665, an ethyleneglycolphospholipid, AEPL, and four single chain alkylphosphocholine analogs, HePC₂, HePC₃, HePC₄ and HePC₆ were also tested. During the period of incubation, the cells remained viable (>70%) as judged by trypan blue dye exclusion. The glycerophosphocholines were the most active and showed the highest therapeutic index. The lipoidal amine was active, but toxic to normal marrow progenitor cells. The ethyleneglycolphospholipid was active against HL60, but not against the other cell lines. The single chain alkylphosphocholine analogs were less active. All of the compounds inhibited PKC activity; however, the glycerophosphocholines were the most inhibitory. Based on a paper presented at the Third International Conference on Platelet-Activating Factor and Structurally Related Alkyl Ether Lipids, Tokyo, Japan, May 1989.