Improving withstand voltage by roughening the surface of an insulating spacer used in vacuum

This paper describes a simple and reliable method of improving the surface insulation strength of a spacer used in vacuum. The method is to roughen the spacer surface to an average roughness R/sub a/ higher than 1 or 2 /spl mu/m. The material of the spacer examined is SiO/sub 2/, PMMA, PTFE or Al/sub 2/O/sub 3/ and their shape is a right cylinder with 10 mm in height and 54 mm in diameter. The spacer is subjected to a ramped DC voltage and its surface charging is observed by using an electrostatic probe embedded in the cathode. It has been found that R/sub a/ decisively affects the charging, which decreases as R/sub a/ increases. Increasing R/sub a/ larger than about 2 /spl mu/m suppresses the charging until a higher applied voltage is reached, thus improving the insulation property.     

Mutagenicity and DNA-damaging activity of decomposed products of food colours under UV irradiation

Five synthetic food colours Food Red Nos 3, 40 and 102 and Food Blue Nos 1 and 2, and their UV irradiated products were tested for mutagenic activity by means of the Ames test using Salmonella typhimurium strains TA98 and TA100. Food colours were irradiated with UV light for 14 days. Food Red Nos 3, 40 and 102 and Food Blue No. 1 were non-mutagenic before and after irradiation. UV irradiated products of Food Blue No. 2 were mutagenic in TA98 with or without S-9 mix. The mutagenic activity increased with increasing irradiation period, reached maximum potency on day 6, and then decreased. Moreover, Food Blue No. 2 showed DNA-damaging activity after 14 days of irradiation in rec-assay using Bacillus subtilis strains H17 and M45. The capillary electrophoresis was applied for the analysis of UV irradiated products of Food Blue No. 2. The original peak of Food Blue No. 2 was decomposed into seven peaks after UV irradiation.     

Analgesic Effect of Tranilast in an Animal Model of Neuropathic Pain and Its Role in the Regulation of Tetrahydrobiopterin Synthesis

Trigeminal neuralgia is unilateral, lancinating, episodic pain that can be provoked by routine activities. Anticonvulsants, such as carbamazepine, are the drugs of choice; however, these possess side-effects. Microvascular decompression is the most effective surgical technique with a higher success rate, although occasionally causes adverse effects. The potential treatment for this type of pain remains unmet. Increased tetrahydrobiopterin (BH4) levels have been reported in association with axonal injury. This study aimed to evaluate the effect of tranilast on relieving neuropathic pain in animal models and analyze the changes in BH4 synthesis. Neuropathic pain was induced via infraorbital nerve constriction. Tranilast, carbamazepine, or saline was injected intraperitoneally to assess the rat’s post-intervention pain response. In the von Frey’s test, the tranilast and carbamazepine groups showed significant changes in the head withdrawal threshold in the ipsilateral whisker pad area. The motor coordination test showed no changes in the tranilast group, whereas the carbamazepine group showed decreased performance, indicating impaired motor coordination. Trigeminal ganglion tissues were used for the PCR array analysis of genes that regulate the BH4 pathway. Downregulation of the sepiapterin reductase (Spr) and aldoketo reductase (Akr) genes after tranilast injection was observed compared to the pain model. These findings suggest that tranilast effectively treats neuropathic pain.     

On a posteriori estimates of inverse operators for linear parabolic initial-boundary value problems

We present numerically verified a posteriori estimates of the norms of inverse operators for linear parabolic differential equations. In case that the corresponding elliptic operator is not coercive, existing methods for a priori estimates of the inverse operators are not accurate and, usually, exponentially increase in time variable. We propose a new technique for obtaining the estimates of the inverse operator by using the finite dimensional approximation and error estimates. It enables us to obtain very sharp bounds compared with a priori estimates. We will give some numerical examples which confirm the actual effectiveness of our method.     

Surface treatment of titanium dioxide nanopowder using rotary electrode dielectric barrier discharge reactor

Titanium dioxide (TiO2) nanopowder (P-25;Degussa AG) was treated using dielectric barrier discharge (DBD) in a rotary electrode DBD (RE-DBD) reactor.Its electrical and optical characteristics were investigated during RE-DBD generation.The treated TiO2 nanopowder properties and structures were analyzed using x-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR).After RE-DBD treatment,XRD measurements indicated that the anatase peak theta positions shifted from 25.3° to 25.1°,which can be attributed to the substitution of new functional groups in the TiO2 lattice.The FTIR results show that hydroxyl groups (OH) at 3400 cm-1 increased considerably.The mechanism used to modify the TiO2 nanopowder surface by air DBD treatment was confirmed from optical emission spectrum measurements.Reactive species,such as OH radical,ozone and atomic oxygen can play key roles in hydroxyl formation on the TiO2 nanopowder surface.     

Inhibition in a microgravity environment of the recovery of Escherichia coli cells damaged by heavy ion beams during the NASDA ISS phase I program of NASA Shuttle/Mir mission no. 6

OBJECTIVE: To explore whether there are different disease patterns of rheumatoid arthritis (RA) in women and men. METHODS: We studied 55 male case patients and 110 female control patients who developed RA between 1970 and 1985 and who resided and received medical care in Olmsted County, Minnesota, for at least 10 years after the diagnosis of RA. Case and control patients were matched for the date of first diagnosis. The pattern and extent of joint involvement, the frequency of joint surgeries, and the presence and type of extraarticular manifestations were determined by retrospective chart review. RESULTS: Incidence rates in women were variable and age dependent, whereas the risk in men older than 36 years was constant over their lifetime. Erosive disease was more frequent in men than in women (72% versus 55%, respectively; P < 0.05) and tended to occur earlier (47% versus 31% for erosive disease within the first 4 years of RA). Although male sex was correlated with a higher risk of bony erosions and an accelerated course of RA, structural consequences of joint destruction were more pronounced in women. Joint surgery was performed more frequently in women (50%) than in men (27%) (P = 0.01). In particular, the frequencies of arthroplasties and arthrodeses of hand and foot joints were different (34 procedures in women versus 1 procedure in men; P < 0.001). Sex influenced the risk as well as the pattern of organ involvement in RA. Nodules and rheumatoid lung disease were typical manifestations in men (P = 0.001 and P < 0.001, respectively), whereas women typically developed sicca syndrome (P = 0.05). Despite differences in disease aggressiveness and disease pattern, there was little difference in the medical therapy in the men compared with the women. CONCLUSION: RA is a heterogeneous disease with variations in phenotype. Sex-associated factors influence disease severity as well as disease pattern. Because sex-related effects influence treatment goals, treatment responses, and side effects, they should be considered in clinical study design and analysis as well as in the treatment decisions for individual patients with RA.     

Simulation of thermophysical flow in axisymmetric nozzle with expansion chamber

Axisymmetric nozzle flows with a free‐jet expansion are simulated considering several substances and several flow conditions, and the thermophysical properties in the nozzle and the free‐jet region are predicted. The present numerical method is based on the preconditioning method developed by Yamamoto and the mathematical models of thermophysical properties of the substances. As numerical examples show, gas flows of carbon dioxide, water, and nitrogen under a subcritical pressure condition are first calculated. Calculated distances to the Mach disk are compared with the experimental results, and also the density distributions are compared among these three substances. Second, carbon dioxide flows while changing the pressure from subcritical to supercritical values are calculated and the effect of pressure on the flow field is investigated. Third, flows of water vapor with and without nonequilibrium condensation are calculated and the effect of condensation on the flow field is investigated. © 2010 American Institute of Chemical Engineers AIChE J, 2011     

Room-temperature densification of MgO bulk ceramics with dispersed nitride phosphor particles

Wave conversion materials with high thermal conductivity are necessary for high-power semiconductor lighting. Ceramics have higher thermal conductivity than existing matrices such as resin or glass in which phosphor particles are dispersed. However, the high densification of ceramics generally requires high-temperature sintering, which degrades and alters the phosphor particles. In this study, we aimed to achieve the high densification of MgO ceramics at room temperature. Applying high hydrostatic pressure with water addition improved the sample packing ratio and promoted the formation of Mg(OH)₂. As a result, the relative density was ≥95%. Additionally, various nitride phosphor particles (CaAlSiN₃:Eu²⁺, β-SiAlON:Eu²⁺, and α-SiAlON:Eu²⁺) were dispersed in the MgO matrix at room temperature without degrading the luminescence property. The thermal conductivity of the obtained sample was about 8 W m^?1K^?1, 40 times higher than that of the epoxy matrix.