Effect of sweep gas species on tritium release behavior from lithium titanate packed bed during 14 MeV neutron irradiation

In a fusion reactor, the prediction of tritium release behavior from breeder blanket is important to design the tritium recovery system, but the amount of tritium generated is necessary information to do that. Hence, tritium generation and recovery studies on lithium ceramics packed bed have been started by using fusion neutron source (FNS) in Japan Atomic Energy Agency (JAEA). Lithium titanate (Li₂TiO₃) was selected as tritium breeding material, and its packed bed was enclosed by the beryllium blocks, and was kept at certain temperature during fusion neutron irradiation. During irradiation, the packed bed was purged with the sweep gas continuously, and tritium released was trapped in each gas absorber selectively by chemical form. In this work, the effect of sweep gas species on tritium release behavior was investigated. In the case of sweep by helium with 1% of hydrogen, tritium in water form was released sensitively corresponding to the irradiation. This is due to existence of the water vapor in the sweep gas. On the other hand, in the case of sweep by helium without water vapor, tritium in gaseous form was released first, and release of tritium in water form was delayed from gaseous tritium and was gradually increased.     

Hydrogen isotope permeation from cooling water through various metal piping

In order to investigate the behavior of hydrogen isotope on the water–metal boundary, deuterium permeation experiments from heavy water vessel through various metal piping, such as pure iron (Fe), nickel (Ni), stainless steel (SS304), and pure iron with 10 μm gold plating, were performed at 573 K and at 15 MPa. During the experiment, surfaces of metal piping except gold plating one were oxidized at the heavy water boundary and then deuterium would generate by the oxidation reactions. This deuterium could be detected by mass spectrometer, which monitored the inside gases of the piping under continuous evacuation. The result showed clearly that the deuterium permeated through Fe, Ni, and SS304 piping was detected as mainly deuterium gas (D₂) under continuous evacuation, though that through gold plating one could not be detected effectively. The D₂ permeation rate through Fe, Ni, and SS304 piping reached equilibrium conditions with oxide generation at D₂O–metal boundary, although concluding the transfer mechanism will require further testing and modeling activities.     

Compatibility of erbium oxide coating with liquid lithium–lead alloy and corrosion protection effect of iron layer

Li–Pb compatibility of Er₂O₃ and Er₂O₃-Fe two-layer coatings has been explored for an understanding of corrosion behaviors and effects of the protection layer. The coatings were peeled off after static Li–Pb immersion test at 600 °C due to the degradation of adhesion between the coating–substrate interface. A loss of Er and then subsequent corrosion of Er₂O₃ were shown after immersion at 500 °C for 500 and 1505 h. However, the outer Fe layer played a role to decrease corrosion rate of the coatings by comparing with the results of Er₂O₃ single layer coatings. Deuterium permeation measurements after corrosion tests at 500 °C showed that the Er₂O₃ coatings kept permeation reduction factors of 10²–10³ after 500 h immersion, but seriously degraded after 1505 h immersion. Corrosion mechanisms suggest that corrosion protection properties will be modified by an optimization of the outer Fe layer and a control of oxygen concentration in Li–Pb.     

Ingestion of gelatinized potato starch containing a high level of phosphorus decreases serum and liver lipids in rats

Potato starch is known to have a higher concentration of phosphate than other starches. The presence of phosphate groups in amylopectin results in resistance to digestion by amylase. Therefore, there is a possibility that potato starch is slowly digested, inducing a physiological effect similar to that of resistant starch and indigestible oligosaccharides. The amount of phosphate group in starch differs with potato cultivar. In the present study, we investigated the effects of gelatinized potato starch containing a high level of phosphorus on lipid metabolism in rats. For this purpose, we determined lipid levels in the serum and liver in rats fed two kinds of gelatinized potato starches with different phosphorus contents. Four groups of male Sprague-Dawley rats were fed a 60% sucrose diet (control) or one of three diets containing cornstarch (CS), Benimaru (BM) potato starch or Hokkaikogane (HK) potato starch. Fat pad weight was slightly decreased in the HK diet group compared with that in the other groups. Free fatty acids in serum were significantly lowered by dietary HK starch compared with control, and serum triglyceride in rats fed the HK diet was also decreased. In the BM and HK diet groups, triglyceride levels in the liver were decreased compared with that in the control and CS groups. As for hepatic total cholesterol level, there were no significant differences among three starch diet groups. Fecal bile acid excretion was greater in the two potato starch groups than in the control group. On the other hand, there were no significant differences in cecal short-chain fatty acid content or pH. Thus, we conclude that dietary gelatinized potato starch reduces free fatty acid and triglyceride in serum and hepatic triglyceride, but does not affect cecal fermentation.     

Non‐Enzymatic Geometry‐Selective Acylation of Tri‐ and Tetrasubstituted α,α′‐Alkenediols

A highly geometry‐selective organocatalytic acylation of tri‐ and tetra‐substituted 2‐alkylidene‐1,3‐propanediols has been developed. The highly E‐selective acylation of various tetrasubstituted 2‐alkylidene‐1,3‐propanediols was achieved in 96 to >99% selectivity for the first time by a non‐enzymatic protocol.     

Chemical analysis and acetylcholinesterase inhibitory effect of anthocyanin-rich red leaf tea (cv. Sunrouge)

BACKGROUND: The purpose of this study was to evaluate the effects of leaf order or crop season on anthocyanins and other chemicals in the anthocyanin‐rich tea cultivar ‘Sunrouge’ (Camellia sinensis x C. taliensis) by using high‐performance liquid chromatography, and to study the effect of ‘Sunrouge’ extract on acetylcholinesterase (AChE) activity in human neuroblastoma SK‐N‐SH cells. RESULTS: The total anthocyanin content was higher in the third (3.09 mg g^?1) than in the second (2.24 mg g^?1) or first crop season (1.79 mg g^?1). The amount of anthocyanins contained in the stem was high (1.61 mg g^?1). In the third crop season, the concentrations of delphinidin‐3‐O‐β‐D ‐(6‐(E)‐p‐coumaroyl)galactopyranoside (DCGa), cyanidin‐3‐O‐β‐D ‐(6‐(E)‐p‐coumaroyl)galactopyranoside, delphinidin‐3‐O‐β‐D ‐galactopyranoside, delphinidin‐3‐O‐β‐D ‐(6‐O‐(Z)‐p‐coumaroyl)galactopyranoside, cyanidin‐3‐O‐β‐D ‐galactoside, and delphinidin‐3‐O‐β‐D ‐glucoside were 1.57 mg g^?1, 0.52 mg g^?1, 0.40 mg g^?1, 0.22 mg g^?1, 0.14 mg g^?1, and 0.11 mg g^?1, respectively. DCGa accounted for about 50% of the anthocyanins present. The suppressive effect of ‘Sunrouge’ water extract on AChE activity in human neuroblastoma SK‐N‐SH cells was the strongest among the three tea cultivars (‘Sunrouge’, ‘Yabukita’ and ‘Benifuuki’). CONCLUSION: These results suggested that ‘Sunrouge’ might protect humans from humans from AChE‐related diseases by suppressing AChE activity. To obtain sufficient amounts of anthocyanins, catechins and/or caffeine for a functional food material, ‘Sunrouge’ from the third crop season should be used. Copyright © 2012 Society of Chemical Industry     

Use of support vector regression and numerically predicted cloudiness to forecast power output of a photovoltaic power plant in Kitakyushu,Japan

The development of a methodology to forecast accurately the power produced by photovoltaic systems can be an important tool for the dissemination and integration of such systems on the public electricity grids. Thus, the objective of this study was to forecast the power production of a 1‐MW photovoltaic power plant in Kitakyushu, Japan, using a new methodology based on support vector machines and on the use of several numerically predicted weather variables, including cloudiness. Hourly forecasts of the power produced for 1 year were carried out. Moreover, the effect of the use of numerically predicted cloudiness on the quality of the forecasts was also investigated. The forecasts of power production obtained with the proposed methodology had a root mean square error of 0.0948 MW h and a mean absolute error of 0.058 MW h. It was also found that the forecast and measured values of power production had a good level of correlation varying from 0.8 to 0.88 according to the season of the year. Finally, the use of numerically predicted cloudiness had an important role in the accuracy of the forecasts, and when cloudiness was not used, the root mean square error of the forecasts increased more than 32%, and the mean absolute error increased more than 42%. Copyright © 2011 John Wiley & Sons, Ltd.     

Fabrication of fluorescence tunable electrospun conjugated polycarbazole fibers containing gold nanoparticles

In this report, we demonstrate a novel way to tune the fluorescence property of electrospun conjugated polymer fibers. The basic strategy is to use a soluble precursor polymer with gold nanoparticles for electrospinning, which is then cross-linked by applying potential cycles in an electrochemical cell. Electroactive carbazole units in electrospun precursor polymer fibers were converted to conjugated polymer fibers. Since the conjugated polymer fibers can be formed, the fluorescence from the conjugated polymer fibers can be tuned by the rate of the conversion and doping of the fibers. Furthermore, the quenching of the fluorescence, which overlaps with the plasmon band of the gold nanoparticles, was observed. The quenching of the fluorescence properties of the fibers was dependent on the amount of gold nanoparticles inside the fibers.     

Lipid production by Lipomyces starkeyi using sap squeezed from felled old oil palm trunks

1. Download : Download high-res image (272KB)
2. Download : Download full-size image