Fatigue characteristics of ultra high molecular weight polyethylene with different molecular weight for implant material

In order to investigate the effect of molecular weight on fatigue characteristics in the ultra high molecular weight polyethylene (UHMWPE), tension–tension fatigue tests of notched specimens were carried out in the present study. The effects of frequency and stress ratio on the fatigue characteristics were also investigated and fractography was discussed. The fatigue strength does not increase with increasing molecular weight. The fatigue strength might be influenced by the high degree of crystallinity in spite of the decreased tie molecule density in this study. Almost no effect of frequency on the number of cycles to failure can be observed. However, the higher the frequency, the higher the crack tip temperature. The effects of heat and strain rate on the fatigue strength must be considered in polymer materials. At a high stress ratio, the stress–number of cycles to failure (S–N) curves shift to high number cycles to failure side. Both stress amplitude and mean stress influence the fatigue life of UHMWPE. © 2001 Kluwer Academic Publishers     

Lipase production in two-step fed-batch culture of organic solvent-tolerant Pseudomonas aeruginosa LST-03

Efficient lipase production by two-step fed-batch culture of an organic solvent-tolerant bacterium, Pseudomonas aeruginosa LST-03, was investigated. When FB synthetic medium was used in flask culture, no lipase activity was detected, whereas lipase was produced at 2.3 I.U./ml in C2 complex medium. However, lipase production was induced in FB medium when a fatty acid was added to the culture broth in the stationary phase. Among fatty acids tested, long chain saturated fatty acids, such as C18 (stearic acid) and C20 (arachidic acid), were found to function as effective inducers for the production of lipase, giving an activity level almost the same as that obtained in C2 medium in flask culture. Two-step lipase production, comprised of a growth phase in fed-batch mode and a production phase in which lipase was induced by the addition of 5% (v/v) stearic acid, was carried out in a jar-fermentor. In the growth phase, the maximum cell concentration at 16 h was only 20 in terms of the optical density at 660 nm (OD660), and a low level of lipase production (8 I.U./ml) was obtained after 167 h. This was considered to be due to the exhaustion of several medium components brought about by the use of an unsuitable medium or feeding solution. After analyzing the contents of the compounds in the culture broth by inductively coupled plasma spectrometry for metal ions and HPLC for anions, a modified FB medium was designed. When this modified FB medium was used in two-step fed-batch culture, the maximum cell concentration reached an OD660 of 55 (30.2 g-dry cells/l) at 16.5 h, and lipase was produced at 96 I.U./ml after 35 h, which is approximately 40 times higher than the production level obtained in flask culture using C2 medium.     

Response function estimation with fine energy bins for the energy-resolved computed tomography using a transXend detector

A new ‘transXend’ detector system has been developed for energy-resolved computed tomography (CT). It consists of several segmented detectors that measure X-rays as electric currents. Response functions of segmented detectors are estimated using component materials of a body under inspection to unfold X-ray spectra. To avoid material-dependent measurements, response functions inherent to segmented detectors are evaluated by Monte Carlo calculations. CT was performed for a phantom consisting of five resins and was analyzed by the estimated response functions. The linear attenuation coefficients for the five resins have excellent agreement with database values.     

Digital Computer Control of a Research Reactor

This report describes a feasibility experiment for a fully automatic operation of Hitachi Training Reactor, emploving an digital computer control system. The system consists of a small control computer (2K words), an input-output peripherals, 3 BF3 counters and a countrol rod mechanism driven by a pulse motor.     

Shear viscosity of rubber modified thermoplastics: Dynamically vulcanized thermoplastic elastomers and ABS resins at very low stress

The shear viscosity of PP-EPDM dynamically vulcanized thermoplastic elastomers and ABS resins were investigated using (a) a constant shear stress creep instrument, (b) a rotational rheometer, and (c) a capillary extrusion rheometer. It was found that stresses exist for some of these materials below which they exhibit only finite deformations. This indicates they exhibit yield values. Much attention was given to measurements of creep at low stresses especially in the neighborhood of yield values. The magnitudes of the yield stresses obtained from these low stress measurements are significantly lower than those obtained using standard extrapolation to zero shear rate of higher stresses from rotational instruments. We also observed a high shear viscosity (～10⁹ PA s) plateau in the materials of high rubber content. We contrasted our results to those found in the literature.     

Studies on anti-inflammatory agents. V. Synthesis and pharmacological properties of 3-(difluoromethyl)-1-(4-methoxyphenyl)-5- [4-(methylsulfinyl)phenyl]pyrazole and related compounds

A series of novel 1,5-diphenylpyrazole derivatives bearing hydrophilic substituents was prepared. The anti-inflammatory and analgesic activities of these compounds were evaluated by using the adjuvant arthritis and Randall-Selitto assays in rats, and the structure-activity relationships were studied. The optimal compound was 3-(difluoromethyl)-1-(4-methoxyphenyl)-5-[4-(methylsulfinyl)phenyl]pyraz ole (10) with oral ED50 values of 0.31 and 2.6 mg/kg on adjuvant-induced arthritis and carrageenin-induced foot edema, respectively. Compound 10 showed analgesic activities not only toward inflamed paw but also toward normal paw (ED30 = 0.55 and 1.8 mg/kg, respectively) in the Randall-Selitto assay, and moreover, 10 was effective in the tail-pinch assay (ED50 = 21 mg/kg) similarly to morphine. The asymmetric synthesis and pharmacological properties of the enantiomers of 10 are also reported.     

Poly(4-diphenylaminostyrene) with a well-defined polymer chain structure: Controllable optical and electrical properties

The effect of polymer chain structure on the optical and electrical properties are reported for poly(4-diphenylaminostyrene) (PDAS), which was prepared by the living anionic polymerization of 4-diphenylaminostyrene (DAS) with the benzyllithium (BzLi)/N,N,N′,N′-tetramethylethylenediamine (TMEDA) system. The optical properties of PDAS are strongly affected by the stereoregularity of the PDAS polymer chain; intramolecular excimer-forming fluorescence was observed from PDAS with a syndiotactic-rich configuration. The highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels of PDAS were approximately −5.4 and −2.0 eV, respectively, regardless of the polymer chain structure. The hole and electron drift mobilities for PDAS were in the order of 10⁻⁴ to 10⁻⁵ (cm²/V s) and 10⁻⁵ (cm²/V s), respectively, with negative slopes. The distance of each triphenylamino (TPA) group in the polymer chain was a major factor influencing the drift mobility of PDAS. The current-voltage (I-V) characteristics of PDAS were controllable according to the polymer chain structure of PDAS.     

Simulation of migration from a multi-layer laminated film intended for retort foods

Migration from multi-layer laminated film pouches intended for retort foods was investigated through HPLC analysis with a fluorescence detector, and measurements of residue on evaporation, consumption of potassium permanganate and total organic carbon. HPLC analysis revealed that the levels of migrants in oil and the water which were heated in the pouches (121 degrees C, 30 min) were ten times of those in the corresponding official simulants under the official conditions; n-heptane (25 degrees C, 60 min), and water (95 degrees C, 30 min). Bisphenol A diglycidyl ether and related compounds were found in the oil and the water heated in the pouches, as well as in the simulants. These compounds were thought to have been present in the adhesive between the laminated films, and migrated through the food-contact film of the package. Consumption of potassium permanganate and residue on evaporation of the heated water were ten times of those of the water simulant, while the total organic carbon level of the heated water was several-hold greater than that of the water simulant. In addition, migrant levels per surface area of the pouch were one-fourth of the concentrations per content volume of the pouch. Since compliance with the legal limits is evaluated based on the concentration per surface area, real migration into foods would be underestimated by a factor of another four.     

Development of a novel aptamer-based sensing system using atomic force microscopy

Atomic force microscopy (AFM) can dynamically detect the adhesion or affinity force between a sample surface and a cantilever. This feature is useful as a detection method using aptamers--single-strand DNA that recognizes its target with very high affinity. The present study proposes a novel DNA aptamer-based sensing system using AFM. In this study, thrombin was chosen as the target molecule, and a DNA aptamer-based AFM sensing system based on competition was developed. The affinity force between the gold chip and the cantilever decreased as the concentration of thrombin increased. Moreover, a low detection limit of 0.2 nM was achieved. Therefore, the AFM sensing system used would be appropriate for the measurement of various chemical compounds.