Crystallization Behavior of Molecular Compound in Binary Mixture System of 1,3‐Dioleoyl‐2‐Palmitoyl‐sn‐Glycerol and 1,3‐Dipalmitoyl‐2‐Oleoyl‐sn‐Glycerol

Previous studies showed that the stable β‐form of molecular compound (MC) crystals having a double‐chain‐length structure is formed in a binary mixture system of 1,3‐dioleoyl‐2‐palmitoyl‐sn‐glycerol (OPO) and 1,3‐dipalmitoyl‐2‐oleoyl‐sn‐glycerol (POP) with a 1:1 concentration ratio of OPO and POP. The use of MC crystals made of POP and OPO for edible applications, such as margarine, is advantageous due to no‐trans, low‐saturated, and high‐oleic fats. Industrial manufacturing technology involves rapid cooling processes, and the kinetic properties of crystallization of MC of OPO and POP are required. In this study, we clarified the crystallization of MC of OPO and POP under rapid cooling at rates of 1–150 °C min^?1, using synchrotron radiation time‐resolved X‐ray diffraction and differential scanning calorimetry methods. The main results are as follows: (1) POP and OPO crystallized in separate manners without the formation of MC crystals under rapid cooling (>40 °C min^?1), while MC crystals started to form with decreasing rates of cooling in addition to the POP and OPO crystals (<30 °C min^?1); (2) metastable and stable forms sub‐α, α, β′, and β of POP and OPO were formed, whereas the MC crystals of β were formed during the cooling processes; and (3) the heating processes after crystallization by rapid cooling caused separate melting of the metastable and stable forms of POP and OPO crystals and the formation of MC crystals of β made of POP and OPO, as well as melting of the MC crystals alone.     

Study of Cuprate Superconductivity Using the Particle Number Conserving Bogoliubov-de Gennes Equations: ARPES and STS Images From Surface Plus Bulk Layers Model

Journal of Superconductivity and Novel Magnetism - We theoretically study the superconductivity in hole-doped cuprate superconductors by employing a model composed of surface and bulk CuO $$_2$$...     

Accelerated Discovery of Potent Bioactive anti-TNFα Aptamers by Microbead-Assisted Capillary Electrophoresis (MACE)-SELEX

Dysregulation of tumor necrosis factor-α (TNFα), a pro-inflammatory cytokine, causes several diseases, making it an important therapeutic target. Here, we identified a novel DNA aptamer against human TNFα using in vitro selection, which included a high exclusion pressure process against non-binding and weak binders through microbead-assisted capillary electrophoresis (MACE) in only three rounds. Among the 15 most enriched aptamers, Apt14 exhibited the highest inhibitory activity for the interaction between TNFα and its cognate receptor in mouse L929 cells. For further improving the bioactivity of the aptamer, dimerization programed by hybridization was evaluated, resulting in the Apt14 dimer exhibited a twofold higher binding affinity and stronger inhibition compared to the monomer counterpart. Rapid identification of bioactive aptamers using MACE in combination with facile dimerization by hybridization accelerates the discovery of novel bioactive aptamers, paving the way toward replacing current monoclonal antibody therapy with the less expensive and non-immunogenic aptamer therapy.     

In Vivo Electrophysiology of Peptidergic Neurons in Deep Layers of the Lumbar Spinal Cord after Optogenetic Stimulation of Hypothalamic Paraventricular Oxytocin Neurons in Rats

The spinal ejaculation generator (SEG) is located in the central gray (lamina X) of the rat lumbar spinal cord and plays a pivotal role in the ejaculatory reflex. We recently reported that SEG neurons express the oxytocin receptor and are activated by oxytocin projections from the paraventricular nucleus of hypothalamus (PVH). However, it is unknown whether the SEG responds to oxytocin in vivo. In this study, we analyzed the characteristics of the brain–spinal cord neural circuit that controls male sexual function using a newly developed in vivo electrophysiological technique. Optogenetic stimulation of the PVH of rats expressing channel rhodopsin under the oxytocin receptor promoter increased the spontaneous firing of most lamina X SEG neurons. This is the first demonstration of the in vivo electrical response from the deeper (lamina X) neurons in the spinal cord. Furthermore, we succeeded in the in vivo whole-cell recordings of lamina X neurons. In vivo whole-cell recordings may reveal the features of lamina X SEG neurons, including differences in neurotransmitters and response to stimulation. Taken together, these results suggest that in vivo electrophysiological stimulation can elucidate the neurophysiological response of a variety of spinal neurons during male sexual behavior.     

The Versatile Manipulations of Self-Assembled Proteins in Vaccine Design

Protein assemblies provide unique structural features which make them useful as carrier molecules in biomedical and chemical science. Protein assemblies can accommodate a variety of organic, inorganic and biological molecules such as small proteins and peptides and have been used in development of subunit vaccines via display parts of viral pathogens or antigens. Such subunit vaccines are much safer than traditional vaccines based on inactivated pathogens which are more likely to produce side-effects. Therefore, to tackle a pandemic and rapidly produce safer and more effective subunit vaccines based on protein assemblies, it is necessary to understand the basic structural features which drive protein self-assembly and functionalization of portions of pathogens. This review highlights recent developments and future perspectives in production of non-viral protein assemblies with essential structural features of subunit vaccines.     

Hydrogen isotope permeation from cooling water through various metal piping

In order to investigate the behavior of hydrogen isotope on the water–metal boundary, deuterium permeation experiments from heavy water vessel through various metal piping, such as pure iron (Fe), nickel (Ni), stainless steel (SS304), and pure iron with 10 μm gold plating, were performed at 573 K and at 15 MPa. During the experiment, surfaces of metal piping except gold plating one were oxidized at the heavy water boundary and then deuterium would generate by the oxidation reactions. This deuterium could be detected by mass spectrometer, which monitored the inside gases of the piping under continuous evacuation. The result showed clearly that the deuterium permeated through Fe, Ni, and SS304 piping was detected as mainly deuterium gas (D₂) under continuous evacuation, though that through gold plating one could not be detected effectively. The D₂ permeation rate through Fe, Ni, and SS304 piping reached equilibrium conditions with oxide generation at D₂O–metal boundary, although concluding the transfer mechanism will require further testing and modeling activities.     

Multiresidue analysis of pesticides in agricultural products by GC/MS coupled with database software

We evaluated a multiresidue method for determination of pesticides in agricultural products by SCAN mode GC/MS coupled with three kinds of database for 253 pesticides: relative retention time, mass spectra and calibration curve (SCAN method). Twenty-six pesticides, a total of 131 pesticides were detected in samples by the SCAN method. The detection results agreed closely with those of the SIM mode GC/MS method using calibration standards (SIM method). The ratios of the SCAN method to the SIM method ranged from 0.3 to 3.1 with SD values of 0.63. It was judged that the SCAN method could be applied to the screening analysis of pesticide residues in agricultural products, provided that the sample preparation method makes it possible to effectively remove sample matrixes with minimal loss of analytes.     

Improvement of lysozyme recovery method from the precipitate of protein-anionic surfactant complexes

A new protein separation process using a surfactant and a polar organic solvent consists of a precipitation step and a recovery step. In the precipitation step, a protein-surfactant complex is precipitated from an aqueous solution, when an ionic surfactant, sodium di(2-ethylhexyl) sulfosuccinate (AOT), is added to an aqueous solution, including protein (lysozyme). In the recovery step, the precipitate is dissolved in a polar organic solvent, such as acetone, and the protein is recovered as precipitates when a very small amount of salt solution was added to remove surfactants from the protein-surfactant complex. However, the details of the protein recovery step from precipitate have not been studied yet. In this study, the improvement of the protein recovery step was examined from the viewpoint of a recovery ratio of protein and a remaining ratio of surfactant. The optimum NaCl concentration in the feed for the protein recovery was in the range of 0.05–0.2 kmol/m³. As the NaCl concentration in the feed increased to more than 0.2 kmol/m³, the precipitation ratio decreased due to the electrostatic screening effect of NaCl. It was found that the addition of a very small amount of NaCl solution to acetone was unnecessary when NaCl was included in the feed lysozyme solution. On the other hand, as the NaCl concentration decreased to less than 0.05 kmol/m³, the precipitation ratio was decreased due to the low re-precipitation of protein by the addition of a small amount of NaCl solution in acetone. In the case of the feed containing no salt, the desired NaCl concentration added to acetone was in the range above 0.2 kmol/m³. In addition, the most suitable volume ratio of acetone to feed was found to be 0.2.     

Fabrication of conducting poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) thin films by ultrasonic spray-assisted mist deposition method

Transparent conducting polymer, poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) thin films were fabricated by a vapor-deposition technique, ultrasonic spray-assisted mist deposition method. The thickness was well controlled from 40 to 600 nm, keeping reasonable conductivity of 300-450 S/cm. The films with thickness less than 180 nm have high (> 80%) transmission over a wide (270-800 nm) spectral region. In addition, formation of ring-dot electrode pattern with a hard-mask was demonstrated, achieving lithography-less patterning. The results encourage that this deposition method is developed as an actual process technology of transparent electrodes in devices.     

Normal Spectral Emissivity Measurement of Molten Cu–Co Alloy Using an Electromagnetic Levitator Superimposed with a Static Magnetic Field

The normal spectral emissivity of molten Cu–Co alloy with different compositions was measured in the wavelength range of 780 nm to 920 nm and in the temperature range of 1430 K to 1770 K including the undercooled condition by an electromagnetic levitator superimposed with a static magnetic field. The emissivity was determined as the ratio of the radiance from a levitated molten Cu–Co droplet measured by a spectrometer to the radiance from a blackbody calculated by Planck’s law at a given temperature, where a static magnetic field of 2.5 T to 4.5 T was applied to the levitated droplet to suppress the surface oscillation and translational motion of the sample. We found little temperature dependence of the normal spectral emissivity of molten Cu–Co alloy. Concerning the composition dependence, the emissivity decreased markedly above 80 at%Cu and reached that of pure Cu, although its dependence was low between 20 at%Cu and 80 at%Cu. In addition, this composition dependence of the emissivity of molten Cu–Co alloy can be explained well by the Drude free-electron model.