Direct x-ray imaging system using an amplified metal-oxide-semiconductor imager in the 4-13-nm wavelength region

We describe a direct x-ray imaging system that uses an amplified metal-oxide-semiconductor imager to detect soft x rays directly for real-time imaging. From the absolute sensitivity of this system as measured through the use of a monochromatic synchrotron radiation beam and a GaAsP Schottky-type photodiode, the minimum sensitivity at a wavelength of 13 nm was estimated to be greater than 10(8)photons mm(-2). This is sufficient to detect soft x rays directly for real-time imaging. Onion cell observations at wavelengths of 4.3 and 4.6 nm indicate that x-ray absorption by the carbon in the cells was detected. This is a promising imaging system for the soft x-ray region in which conventional CCD's are difficult to use.     

Theoretical analysis of the spatial phase-matching loci for second-harmonic generation and multiwave-mixing interactions

We report a theoretical analysis on spatial noncolinear phase matching of multiwave mixing and its application to a second-harmonic-generation (SHG) experiment. From the numeric calculations, the noncolinear phase-matching properties in general situations were determined. The theory gives the applicability for all noncolinear phase matching. Fine coincidences between theoretical calculations and observed spatial loci on noncollinear phase-matching SHG were confirmed. Relations that allow the calculation of the noncollinear phase-matching angle for any case of SHG are established. As an example, the noncolinear phase-matched SHG pattern on a screen is calculated numerically in the case of SHG of 1064 nm from a Nd:YAG laser under the phase-matched condition for two organic nonlinear crystals: 1-(2-thienyl)-3-(4-methyphenyl) propene-1 (TC-28), which is biaxial, and (2-furyl) methacrylic anhydride (FMA), which is uniaxial. Experimental results compared quite favorably with the theoretical analysis. Noncolinear phase matching may be of great practical interest in optical multiwave-mixing processes, such as optical parametric oscillation and optical parametric amplification. This technique also can be used for the measurement of crystal optical constants.     

Some properties of mullite powders prepared by chemical vapour deposition

The sinterability of mullite (3Al₂O₃·2SiO₂) powder prepared by chemical vapour deposition was examined to improve the conditions for fabricating dense mullite ceramics. The starting powder contained not only mullite, but also a small amount of -Al₂O₃ (Al-Si spinel) and amorphous material. Although the compressed powder was fired at a temperature between 1550 and 1700 °C for 1, 3 and 5 h, the relative densities of the sintered compacts were limited to 90%: (i) due to the creation of pores/microcracks during the solid state reaction (1100–1350 °C), and (ii) due to restriction on the rearrangement of grains because the amount of liquid phase (1550–1700 °C) was insufficient. Calcination of the starting powder was effective for preparation of easily sinterable powder with homogeneous composition. When the compact formed by compressing the calcined powder at 1400 °C for 1 h was fired at 1650 °C for 3 h, the relative density was raised up to 97.2%; moreover, mullite was the only phase detected from the sintered compact. The sintered compact was composed of polyhedral grains with sizes of 1–2 m and elongated grains with long axes of 6 m.     

Cu-NMR study on high-T c cuprate La1.89Ca1.11Cu2O6+δ (La2126)

Cu-NMR spectra and the nuclear spin-lattice relaxation rate T ₁ ^-1 have been studied intensively on the bilayer type high-T_c cuprate La_1.89Ca_1.11Cu₂O₆₊ (La2126). The resonance line shift showed a monotonic decrease with lowering temperature in the normal state, indicating that this compound belongs to the lightly-doped region. The Curie-Weiss temperature dependence of (T₁T)^–1 in the normal state shows that the pseudo spin-gap does not always exist in the light-doped bilayer systems.     

Extremely localized interaction in a market model

The model of self-organized criticality (SOC) is a useful tool to understand the complexity of natural systems in the form of the artificial life and the artificial market. However, SOC remains the question what guarantees the criticality even though the natural systems seem to keep itself in the critical state. In this paper, we focus on the locality of interaction in zero-intelligence plus (ZIP) model. The extremely localized interaction changes the behavior of the ZIP model from equilibrium to intermittency. Although the original ZIP model falls into unstable with some noise, extremely localized interaction model archives robust intermittency against the noise parameter. Further, the statistical property of intermittent behavior shows the power-law nature.     

Traceable P2P record exchange: a database-oriented approach

In recent years, peer-to-peer (P2P) technologies are used for flexible and scalable information exchange in the Internet, but there exist problems to be solved for reliable information exchange. It is important to trace how data circulates between peers and how data modifications are performed during the circulation before reaching the destination for enhancing the reliability of exchanged information. However, such lineage tracing is not easy in current P2P networks, since data replications and modifications are performed independently by autonomous peers—this creates a lack of reliability among the records exchanged. In this paper, we propose a framework for traceable record exchange in a P2P network. By managing historical information in distributed peers, we make the modification and exchange histories of records traceable. One of the features of our work is that the database technologies are utilized for realizing the framework. Histories are maintained in a relational database in each peer, and tracing queries are written in the datalog query language and executed in a P2P network by cooperating peers. This paper describes the concept of the framework and overviews the approach to query processing.     

Stress intensity factors of an inclined elliptical crack near a bimaterial interface

In this paper the stress intensity factors are discussed for an inclined elliptical crack near a bimaterial interface. The solution utilizes the body force method and requires Green’s functions for perfectly bonded semi-infinite bodies. The formulation leads to a system of hypersingular integral equation whose unknowns are three modes of crack opening displacements. In the numerical calculation, unknown body force densities are approximated by using fundamental density functions and polynomials. The results show that the present method yields smooth variations of stress intensity factors along the crack front accurately. Distributions of stress intensity factors are presented in tables and figures with varying the shape of crack, distance from the interface, and elastic modulus ratio. It is found that the inclined crack can be evaluated by the models of vertical and parallel cracks within the error of 24% even for the cracks very close to the interface.     

A flexible videoconference system based on multiagent framework

We present a design and implementation of a flexible videoconference system (VCS) using multiagent computing technology. The proposed system, we named FVCS, aims to reduce the burden of the users under the operational environment with insufficient computational resources, such as the Internet environment with small-scale computers at homes and offices, by embedding flexibility to the conventional videoconference system. In this paper, we design and implement FVCS with knowledge-based multiagent framework to realize adaptability of FVCS. We also evaluate the adaptability of the prototype systems of FVCS based on an operational situation observed in its experiments. From the result of the experiments, we conclude that the multiagent-based design and implementation is reasonable for construction of FVCS.     

Avoiding Routing Loops on the Internet

Suppose that some particular link in the Internet is currently congested. A natural solution is to try to make packets bypass that link. This can be done by increasing the cost of that link intentionally, say from a ₁ to a ₂, since the Internet uses shortest-path routing. Unfortunately, however, this often causes temporary loops for packet traveling, called routing loops. In this paper we show that routing loops can be avoided by increasing the cost of the link not directly from a ₁ to a ₂ but through an intermediate value, a ₃, i.e., from a ₁ to a ₃ and then to a ₂. We may need several intermediate values. We show that in this case the greedy strategy, namely, raising the cost as much as possible in each step, is optimal.