Geochemical characteristics of the Yufuin outflow plume, Beppu hydrothermal system, Japan

Thermal water at Yufuin (Kyushu Island, Japan) is tapped through about 820 shallow wells and used mainly for hot-spring bathing purposes. Chemical and isotopic data for fluids from wells and fumaroles in Yufuin and Beppu indicate that the thermal activity at Yufuin represents a dilute, westward-flowing hydrothermal outflow plume from the Beppu hydrothermal system. Two other (eastward-flowing) outflow plumes have long been recognized at Beppu, but the Yufuin outflow plume is first recognized here. The Yufuin outflow plume is apparently a mixture of two end-member fluids: (1) deep high-temperature (250–300°C) fluid from the Beppu system having high chloride concentration (1400–1600 mg/L) and a δ¹⁸O value near −6.0%, and (2) meteoric water having low chloride concentration (≤7 mg/L) and a δ¹⁸O value near −9.2%.A permeable conduit for the vertical and lateral transport of deep fluid from the Beppu system is provided by the Yufuin Fault zone, which extends westward from the southern flank of Mt. Tsurumi volcano to the town of Yufuin. Stable isotope ratios and chloride concentrations for shallow groundwaters near the eastern end of the fault, at an elevation near 700 m, are consistent with those required for the low-chloride meteoric end-member of the Yufuin thermal waters. Recharge of this meteoric water, as well as mixing with the Beppu deep fluid, may occur along the Yufuin Fault. Enthalpy-chloride relations indicate additional conductive heating of the Yufuin waters, in the amount of 350–500 kJ/kg beyond that which can be accounted for by mixing between Beppu deep fluid and meteoric water. This could be a result of conductive heating with convection to a depth of 1–2 km. Estimates of the magnitude of the heat source for the Beppu hydrothermal system should take into account the heat being discharged at Yufuin.     

Influence of a fiber-network microstructure of paper-structured catalyst on methanol reforming behavior

A novel microstructured catalyst that consists of Cu/ZnO catalyst powders and ceramic fibers was successfully prepared using pulp fibers as a tentative matrix by a papermaking technique. As-prepared material, called a paper-structured catalyst, possessed porous microstructure with layered ceramic fiber networks (average pore size ca. 20 μm, porosity ca. 50%). In the process of methanol autothermal reforming (ATR) to produce hydrogen, paper-structured catalysts demonstrated both high methanol conversion and low concentration of undesirable carbon monoxide as compared with catalyst powders and pellets. The catalytic performance of paper-structured catalysts depended on the use of pulp fibers, which were added in the paper-forming process and finally removed by thermal treatment before ATR performance tests. Confocal laser scanning microscopy and mercury intrusion analysis suggested that the tentative pulp fiber matrix played a significant role in regulating the fiber-network microstructure inside paper composites. Various metallic filters with different average pore sizes, used as supports for Cu/ZnO catalysts, were subjected to ATR performance tests for elucidating the pore effects. The tests indicated that the pore sizes of catalyst support had critical effects on the catalytic efficiency: the maximum hydrogen production was achieved by metallic filters with an average pore size of 20 μm. These results suggested that the paper-specific microstructures contributed to form a suitable catalytic reaction environment, possibly by promoting efficient diffusion of heat and reactants. The paper-structured catalyst with a regular pore microstructure is expected to be a promising catalytic material to provide both practical utility and high efficiency in the catalytic gas-reforming process.     

An investigation of the pH-activity relationships of Cex, a family 10 xylanase from Cellulomonas fimi: xylan inhibition and the influence of nitro-substituted aryl-beta-D-xylobiosides on xylanase activity

The kinetic parameters of Cex, a family 10 xylanase from Cellulomonas fimi, were determined at various pH levels using soluble birchwood xylan (BWX) as a natural polymeric substrate along with three other synthetic aryl-beta-D-xylobioside substrates. Using BWX, a high level of substrate inhibition was observed which increased with decreasing pH. In contrast, typical Michaelis-Menten-type profiles were obtained using the three aryl-beta-D-xylobiosides as substrates. The k(cat) values determined using o-nitrophenyl-beta-D-xylobioside did not change as the pH increased, whereas the k(cat) values obtained with BWX, phenyl-beta-D-xylobioside and p-nitrophenyl-beta-D-xylobioside decreased, suggesting that the presence of an ortho nitro group affects the activity displayed by Cex. These differences were not observed with XynB from Clostridium stercorarium F9, a member of the same family of xylanases as Cex. These results indicate that a careful evaluation is required when employing substituted aryl-beta-D-xylobiosides in the characterization of xylanases.     

Antiferromagnetic Order in the Ladder Compound SrCu2O3; Cu-NMR/NQR Measurements

We carried out the extensive Cu-nuclear magnetic and quadrupole resonance (NMR/NQR) experiments on the Zn(Ni)-doped ladder compound SrCu ₂ O ₃ (Sr123), Sr(Cu _1–x M _x ) ₂ O ₃ (M=Zn and Ni) with x 0.02 and the Ladoped Sr123, Sr _1–x La _x Cu ₂ O ₃ with x 0.03. A spin-correlation length _s /a (a: the lattice spacing between the Cu sites along the leg) of nonmagnetic impurity-induced staggered polarization (IISP) estimated from a quasi-one-dimensional (Q1D) IISP along the two legs in the 0.1–2 % Zn-doped Sr123 was found to be independent of temperature (T) and scaled to an mean impurity distance D _AV with the relation of _s /a = 2.5 + 0.1D _AV The _s /a's are much longer in x = 0.001 ( _s /a 50) and 0.005 ( _s /a 12) than an instantaneous spin-correlation length ₀ /a 3 – 8 in Sr123. The formula of Néel T, T _N (WC-Q1D)=J exp(–D _AV /(_s/a)) (J = 2000 K) based on the weakly interladder-coupled (WC) Q1D model explains the experimental T _N values quantitatively.     

Ferromagnetic Correlations in Ca-Doped Sr2RuO4: 87Sr NMR Study

Magnetic properties on Sr_2–x Ca _x RuO₄ have been investigated by a microscopic probe of ⁸⁷Sr-NMR in order to understand the magnetic character on spin-triplet superconductor of Sr₂RuO₄, which has multibands on the Fermi surface. With substituting Ca for Sr which gives rise to crystal distortion, the Knight shift (K) and the nuclear spin-lattice relaxation rate divided by temperature (1/T _{1 T}) increases progressively up to x=1.5. The Korringa relation from K and 1/T ₁ T becomes smaller, indicative of development of ferromagnetic fluctuations with increasing Ca content. This suggests that the q-independent spin fluctuations originating from the 2-dimensional band are changed to the ferromagnetic ones by the Ca doping.     

中国液态锂铅包层材料研究进展

液态锂铅包层是国际上普遍关注和最有发展潜力的聚变堆包层概念设计之一,而包层材料是液态锂铅包层的核心问题之一.目前,液态锂铅包层普遍选用低活化铁素体/马氏体钢(RAFM钢)作为结构材料,液态锂铅作为中子倍增剂及氚增殖剂.另外,部分设计采用了耐高温、电绝缘流道插件作为功能材料,以降低磁流体动力学效应及提高冷却剂出口温度(高于700℃).为适应液态包层的发展需求,中国科学院等离子体物理研究所FDS团队联合国内外相关研究单位,进行了具有中国自主知识产权的中国低活化马氏体钢(CLAM钢)及液态锂铅包层功能材料研发,并开展了锂铅热对流及强迫对流回路的设计、研制及腐蚀实验研究,以研究液态金属锂铅的流动特性及其与结构和功能材料的相容性.同时建立了聚变堆材料数据库平台,为促进中国聚变堆液态包层及材料技术的研究和发展提供数据支持.     

Benchmarks for psychotherapy efficacy in adult major depression.

This study estimates pretreatment-posttreatment effect size benchmarks for the treatment of major depression in adults that may be useful in evaluating psychotherapy effectiveness in clinical practice. Treatment efficacy benchmarks for major depression were derived for 3 different types of outcome measures: the Hamilton Rating Scale for Depression (M. A. Hamilton, 1960, 1967), the Beck Depression Inventory (A. T. Beck, 1978; A. T. Beck & R. A. Steer, 1987), and an aggregation of low reactivity-low specificity measures. These benchmarks were further refined for 3 conditions: treatment completers, intent-to-treat samples, and natural history (wait-list) conditions. The study confirmed significant effects of outcome measure reactivity and specificity on the pretreatment-posttreatment effect sizes. The authors provide practical guidance in using these benchmarks to assess treatment effectiveness in clinical settings. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Trunk motion control during the flight phase while hopping considering angular momentum of a humanoid

In previous studies, various stabilizing control methods for humanoids during the stance phase while hopping and running were proposed. Although these methods contribute to stability while hopping and running, it is possibility that the control during the flight phase could also affect the stability. In this study, we investigated whether the control during the flight phase can affect the stability of a humanoid while running. To achieve stable hopping, we developed a control system that accounts for the angular momentum of the whole body during the flight phase. In this system, the angular momentum generated by the motion of the lower body in each time interval is calculated during the flight phase, and the trunk joints are controlled to generate the angular momentum necessary to compensate for the deviation of the waist posture, which is used as the reference point for the motion coordinate system of the robot. Once the proposed control system was developed and simulated, we found that the hopping duration in the unconstrained state was extended.     

Speech recognition in living rooms: Integrated speech enhancement and recognition system based on spatial,spectral and temporal modeling of sounds

Research on noise robust speech recognition has mainly focused on dealing with relatively stationary noise that may differ from the noise conditions in most living environments. In this paper, we introduce a recognition system that can recognize speech in the presence of multiple rapidly time-varying noise sources as found in a typical family living room. To deal with such severe noise conditions, our recognition system exploits all available information about speech and noise; that is spatial (directional), spectral and temporal information. This is realized with a model-based speech enhancement pre-processor, which consists of two complementary elements, a multi-channel speech–noise separation method that exploits spatial and spectral information, followed by a single channel enhancement algorithm that uses the long-term temporal characteristics of speech obtained from clean speech examples. Moreover, to compensate for any mismatch that may remain between the enhanced speech and the acoustic model, our system employs an adaptation technique that combines conventional maximum likelihood linear regression with the dynamic adaptive compensation of the variance of the Gaussians of the acoustic model. Our proposed system approaches human performance levels by greatly improving the audible quality of speech and substantially improving the keyword recognition accuracy.     

Analysis of nonlinear transient responses of piezoelectric resonators

The electric transient response method is an effective technique to evaluate material constants of piezoelectric ceramics under high-power driving. In this study, we tried to incorporate nonlinear piezoelectric behaviors in the analysis of transient responses. As a base for handling the nonlinear piezoelectric responses, we proposed an assumption that the electric displacement is proportional to the strain without phase lag, which could be described by a real and constant piezoelectric e-coefficient. Piezoelectric constitutive equations including nonlinear responses were proposed to calculate transient responses of a piezoelectric resonator. The envelopes and waveforms of current and vibration velocity in transient responses observed in some piezoelectric ceramics could be fitted with the calculation including nonlinear responses. The procedure for calculation of mechanical quality factor Q(m) for piezoelectric resonators with nonlinear behaviors was also proposed.