Structural Defects Control the Energy Level Alignment at Organic/Organic Interfaces

The dependence of the energy level alignment (ELA) on structural defects at an organic/organic heterojunction (OOH) of perfluoropentacene (PFP)‐on‐diindenoperylene (DIP) was investigated using X‐ray scattering and ultraviolet photoelectron spectroscopy. The density of structural defects near the interface between the PFP and DIP layers was varied by changing the growth temperature of the DIP film. A direct relationship was found between the defect density and the ELA at the OOH; the ELA together with the change in the electrostatic potential (quasi‐interface dipole layer) at the OOH varies systematically with the defect density near the interface. This indicates that a key factor affecting the ELA is the electrostatic potential change across the OOH interface, which is produced by electron transfer from DIP occupied gap states to PFP unoccupied gap states. These gap states originate from the defects and are effectively controlled by adjusting the growth conditions of the organic films. As a result, the ELA at OOH interfaces can be controlled by the density of structural defect, which is important for organic devices employing OOHs, such as organic photovoltaic cells.     

950 keV, 3.95 MeV and 6 MeV X-band linacs for nondestructive evaluation and medicine

We are developing compact X-band linac X-ray sources for nondestructive evaluation and medicine. First, we develop a portable X-ray system by a 950 keV 9.4 GHz X-band linac to realize on-site inspection. We use a low power (250 kW) magnetron as an RF source for compactness of the whole system. Since the RF power source is quite small and the stored energy in the structure is also small, we faced the problem of beam loading and current/RF-power oscillation. We are analyzing the problem by the circuit model. We plan to use this system for erosion inspection of metal pipes of petrochemical complex. By adopting a side-coupling cavity design to avoid the oscillation, we have developed 6 MeV X-band (9.3 GHz) linac for pinpoint dynamic tracking cancer therapy. Furthermore, we are manufacturing 3.95 MeV X-band (9.3 GHz) linac X-ray source with flexible waveguides for on-site bridge inspection. Updated results and situations are presented.     

Modulation of nanotube formation in apatite single crystal via organic molecule incorporation

Hydroxyapatite materials are potentially useful for biomedical application, especially as vehicles for functional molecules. Structural control of bulk apatite materials, such as in the fabrication of hollow microspheres or porous structures, has been studied for this purpose. However, control of the internal structure of the source apatite crystal itself is still a challenge. Here, we show that small organic molecules incorporated in apatite crystals act as porogens which control the porous structure of apatite single crystal. The presence of amino acid under apatite synthesis conditions leads to firm bindings and encapsulation of the amino acid in apatite single crystals. Amino acid elimination by heating or electron beam irradiation enhances the pore formation in apatite single crystal. Moreover, incorporation of an acidic amino acid in apatite induces peapod like nanotubes in apatite single crystals. This study suggests the potential of using small organics for nano-structural control of apatite single crystals which would be valuable for enhancing drug loadings or modulating material digestion in vivo.     

Analysis of nonlinear transient responses of piezoelectric resonators

The electric transient response method is an effective technique to evaluate material constants of piezoelectric ceramics under high-power driving. In this study, we tried to incorporate nonlinear piezoelectric behaviors in the analysis of transient responses. As a base for handling the nonlinear piezoelectric responses, we proposed an assumption that the electric displacement is proportional to the strain without phase lag, which could be described by a real and constant piezoelectric e-coefficient. Piezoelectric constitutive equations including nonlinear responses were proposed to calculate transient responses of a piezoelectric resonator. The envelopes and waveforms of current and vibration velocity in transient responses observed in some piezoelectric ceramics could be fitted with the calculation including nonlinear responses. The procedure for calculation of mechanical quality factor Q(m) for piezoelectric resonators with nonlinear behaviors was also proposed.     

Suppression of cell growth by ectopic expression of N-cadherin

We found that ectopic expression of N-cadherin in 3Y1 caused tight association of cells and, thereby, substantially suppressed cell growth. N-cadherin expression inhibited neither tyrosine phosphorylation of cellular proteins, GTP uptake onto Ras, nor activation of MAP kinase, suggesting that it does not directly interfere the Ras-MAP kinase pathway. However, co-expression of N-cadherin with dominant negative Ras, S17N Ras, showed synergestic growth inhibitory effect, suggesting that N-cadherin signaling antagonizes the Ras-MAP kinase signaling. In addition, we found that N-cadherin yielded cell-cycle arrest at G0/G1 phase. These results strongly suggest that N-cadherin cell adhesion machinery works as a negative controller of cell cycle in 3Y1 and this growth suppressive function of cadherin is distinct from the epithelial morphogenetic function.     

A Multipitch Analyzer Based on Harmonic Temporal Structured Clustering

This paper proposes a multipitch analyzer called the harmonic temporal structured clustering (HTC) method, that jointly estimates pitch, intensity, onset, duration, etc., of each underlying source in a multipitch audio signal. HTC decomposes the energy patterns diffused in time-frequency space, i.e., the power spectrum time series, into distinct clusters such that each has originated from a single source. The problem is equivalent to approximating the observed power spectrum time series by superimposed HTC source models, whose parameters are associated with the acoustic features that we wish to extract. The update equations of the HTC are explicitly derived by formulating the HTC source model with a Gaussian kernel representation. We verified through experiments the potential of the HTC method     

Development of a deep-hole, laser-guide boring tool: the boring of workpieces with a thin wall and an inclined prebored hole

A laser-guided BTA tool has been developed to prevent axial hole deviations. Four kinds of experiments were conducted to examine the performance of this tool in detail and to determine its practical application using a duralumin (A2017-T4) workpiece with a prebored 108-mm diameter hole. The first experiment was performed to examine the conditions of the hole deviation in the case of normal deep-hole boring. The second was to examine whether the tool corrects for the stated hole deviation. The third was to examine whether the tool can go straight through to the target without shifting toward a thin wall (t = 0.7 mm) on one side of the workpiece. The fourth was to examine whether the tool can be guided toward the target without affecting a prebored hole, which was inclined to radial direction at 100 μm for a hole length of 100 mm. The experiments were performed with a rotating tool-stationary workpiece system. Rotational speed was 270 rpm and feed ws 0.125 mm/rev. Tool diameter was 110 mm. The results show that the tool can be guided to go straight through toward the target despite the disturbances.