Formation of gas barrier films by Cat-CVD method using organic silicon compounds

Silicon nitride (SiN_x) and silicon oxynitride (SiO_xN_y) films have been formed by catalytic chemical vapor deposition (Cat-CVD) method using hexamethyldisilazane (HMDS). Addition of NH₃ gas and increase in gas pressure can prevent carbonization of tungsten (W) catalyzer. These SiO_xN_y films have high gas barrier ability compare to the case of SiO_xN_y films using SiH₄ and thus are expected for novel sealing films.     

Measurement of tongue–artificial nipple contact pressure during infant sucking

To clarify the motor function of the infant tongue during sucking, we developed an artificial nipple that contained multiple small built‐in force sensors integrated with a PC‐based system which is capable of measuring tongue–artificial nipple contact pressures in real time. The force sensor is a cantilever structure with a small, thin stainless steel beam where an all‐purpose foil strain gauge is attached to the surface of the beam. An artificial nipple made of an elastomer containing these sensors is connected through an amplifier and an A/D converter to a PC via a USB port. Using this system, measurements were taken in three infants whose oral feeding was well established and in one infant of low birth weight. The results from each force sensor showed a pressure waveform of a nearly simple harmonic motion that indicated a peristalsis‐like movement of the tongue; the sucking frequency was found to be about two times per second. In addition, in the low‐birth‐weight infant, the pressure changed as the infant grew. © 2012 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Catalytic activity of yeast extract in biofuel cell

It was revealed that the dry powder yeast extract (YE) has the ability to act as a biocatalyst as well as a mediator in a biofuel cell. The yeast extract, from Nihon Pharmaceutical Co., Ltd., was used as a biocatalyst in an open air cathode biofuel cell containing phosphate buffer for glucose oxidation. The anode medium with only the YE showed an immediate activity by producing a current and delivering power depending on its concentration. By adding glucose to the anode medium, the anode potential decreased with time to -0.2?V vs. normal hydrogen electrode (NHE), and produced a higher power compared to that without glucose. The biofuel cell produced an open circuit voltage (OCV) as high as 1?V.     

Behavior of the high frequency Raman modes of double-wall carbon nanotubes after doping with bromine or iodine vapors

The effects of two different halogen dopants (bromine and iodine) at different concentrations on the higher frequency modes (the so-called G and G′ bands) of the Raman spectra of double-wall carbon nanotube (DWCNT) “buckypaper” are investigated. The effects of dopants on different DWCNT configurations (metallic inner/semiconducting outer and vice versa) are studied by changing the laser excitation energy. The doping causes the loss of the Breit–Wigner–Fano line shape and the appearance of less metallic behavior. An increase of the relative intensity of the G⁺ band, which is more sensitive for the outer metallic tubes, is clearly observed with increasing Br₂ concentration in the sample. By analysis of the G⁺ band and the G′ band it is possible to measure the changes in the electron–phonon coupling, due to the charge-transfer between the dopant (Br₂ or I₂) and the tubes in the DWCNT. The doping effect causes an upshift of the G⁺ band and a suppression of the contribution of the inner tubes to the G′ band signal and as a consequence, the observed G′ band is dominated by the contribution from the outer tubes.     

Photocatalytic hydrogen production from water with nonfood hydrocarbons as oxidizing sacrifice agents

To enhance photocatalytic water splitting, various oxidizing sacrifice agents (OSA) have been added to the system in order to scavenge the coproduced O₂, and, thus, to hinder the reverse reactions. In the aim of achieving carbon‐neutral photocatalytic water splitting, nonfood hydrocarbons of castor‐ and jojoba‐oils were evaluated as OSA. Moreover, various surfactants were tested as emulsifiers for W/O binary solution for promoting photocatalytic water splitting rate. Among the OSA used, the castor‐oil was found to be more suitable candidate compared to jojoba‐oil, which was attributed to its smaller carbon chain numbers of mainly 18. Without surfactants, around 20 vol %‐castor‐oil aqueous binary solution with TiO₂/Pt(0.10 wt %) provided the highest water splitting rate of about 30 mL‐H₂/(m²·h). Among tested surfactants, liquid‐detergent was the best due to its optical transparency. 40 vol %‐ or 60 vol %‐castor‐oil emulsion with a drop of liquid‐detergent resulted in a water splitting rate of 125 mL‐H₂/(m²·h), which was four times greater that the aforementioned highest value. © 2010 American Institute of Chemical Engineers AIChE J, 2011     

Preparation of polyynes by liquid-phase laser ablation using different irradiation target materials and solvents

Polyynes were prepared from pellets of a perylene derivative, 3,4,9,10-perylene tetracarboxylic dianhydride (PTCDA), and graphite by liquid-phase laser ablation, using solvents of methanol, ethanol, 1-propanol, 1-butanol, t-butyl alcohol, n-hexane, and decalin. The amounts of polyynes produced from PTCDA strongly depended on the polarity of the solvent, while those from graphite did not. Polar functional groups of acid-anhydride side chains in PTCDA are believed to influence the amounts of C₂ radicals produced by laser ablation. The long-chain polyyne C₂₈H₂ was detected in a chromatogram of a solution obtained from a graphite pellet and solvent decalin.     

Glass capillary optics for producing nanometer sized beams and its applications

We have developed a method to produce micro/nano meter sized beams of keV energy highly charged ions (HCIs) and MeV energy protons/He ions with tapered glass capillary optics for application of surface modifications and a biological tool called “cell surgery”, respectively. The transmission through the tapered glass capillaries with inlet diameter of 0.8 mm?, outlet diameter from 900 nm? to several tens of microns and length of about 50 mm was performed using 8/64 keV Ar⁸⁺ beams. The transmitted beams had a density enhancement of about 10 and were guided through a capillary tilted by as large as ±100 mrad. The charge state of the beams was kept during the transmission. The combination of MeV proton/He ion beams and the capillary with a thin end window at its outlet can realize pinpoint energy deposition and three-dimensional selection of the bombarding point in an arbitrary position of a living cell or in any liquid object. We demonstrated that a real biological cell, HeLa cell with the nucleus labeled by green fluorescent protein (GFP), was irradiated with the microbeam, which was prepared by 4 MeV He²⁺ entering a capillary with an end window of 7.3 μm in thickness and outlet diameter of 9.6 μm?. The transmitted MeV ion beams had density enhancement up to 1000 according to the capillary outlet sizes, which are applicable to various material analyses employing microbeams.     

Distribution Behavior of Nb,Ta, and Pa as Homologues of Db in Cation Exchange and Solid-Liquid and Liquid-Liquid Extractions by Aliquat 336 from Hydrochloric Acid

Detailed chemical studies on transactinide elements will clarify their characteristic properties caused by strong relativistic effect. In this work, to realize chemical study on transactinide element ₁₀₅Db, cation exchange, and solid-liquid and liquid-liquid extractions of micro amounts of Nb, Ta (homologues of Db), and Pa (pseudo homologue) by Aliquat 336 were performed employing hydrochloric acid. Clearly different chloride complex formations and distribution reaction kinetics were observed among these elements, and the present results are useful for studying the chemical properties of Db. Based on these results, we propose suitable experimental conditions for Db.     

Effect of triphenyl phosphate flame retardant on properties of arylamine‐based polybenzoxazines

Three types of arylamine‐based benzoxazine resins modified with both condensed‐phase and gas‐phase action flame retardant, i.e. triphenyl phosphate (TPP) at various weight ratios were investigated. From rheological study, it was found that the viscosity of benzoxazines/TPP mixtures were significantly lower than that of the neat benzoxazine monomers suggesting flow property enhancement. Furthermore, differential scanning calorimetry results revealed that the onset and the maximum temperatures of the exothermic peak, due to the ring opening polymerization of benzoxazine resins, shifted to lower temperatures with increasing TPP. In addition, all polybenzoxazines possessed relatively high char yield, which increased as the TPP content increased thus enhancing their flame retardancy. The limiting oxygen index values of the flame retarded polybenzoxazines also increased with TPP addition. The maximum flame retardancy of UL94 V‐0 class was obtained with an addition of only few percents of TPP in the polybenzoxazines. Flexural strength, flexural modulus, and glass transition temperature of those polybenzoxazines tended to decrease with an addition of TPP mainly due to its plasticizing effect. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 1074‐1083, 2013