Regioselective Alkoxylation of 2,2,4-Trimethyl-1,3-pentanediol

An efficient procedure for the regioselective synthesis of secondary alcohol alkoxylates from 2,2,4-trimethyl-1,3-pentanediol (TMPD) is described. TMPD was reacted with propylene oxide followed by ethylene oxide in the presence of a catalytic amount of alkali metal hydroxide to form secondary alcohol alkoxylates. Instead of a mixture of compounds resulting from the reaction of TMPD and propylene oxide, the primary hydroxyl group of the TMPD reacted to form predominantly 2,2,4-trimethyl-3-hydroxypentylpropoxylate as the major product. On further ethoxylation the less hindered secondary hydroxyl group of the 2,2,4-trimethyl-3-hydroxypentylpropoxylate reacted predominantly. ¹³C NMR indicated that the secondary hydroxyl group (96.2 mol%) of TMPD remained unreacted during alkoxylation.     

Monomer sequence of partially hydrolyzed poly(4-tert-butoxystyrene) and morphology of diblock copolymers composing this polymer sequence as one block

The molecular characteristics of poly(4-tert-butoxystyrene) (O) upon hydrolysis reaction were investigated. It is known that O can be converted into poly(4-hydroxystyrene) (H) through hydrolysis reaction using strong acid. In this study, a set of poly(4-tert-butoxystyrene-co-4-hydroxystyrene)s (O/H copolymers) having various conversion rates, f_Hs, were prepared. Hydrolysis reaction is found to occur uniformly by matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS) where the average f_H obtained was consistent with that from ¹H NMR though a certain distribution in the number of hydrolyzed units was conceived. Monomer sequence of O/H copolymers was determined by ¹³C NMR and the changes in triad concentration were obtained by spectra subtraction method. As a result, ¹³C NMR reveals that O and H are statistically distributed. To evaluate the effect of hydrolysis on microphase-separated structure, we observed the morphology of partially hydrolyzed poly(4-tert-butylstyrene-block-4-tert-butoxystyrene) (BO) by transmission electron microscopy (TEM) and small-angle X-ray scattering (SAXS). Samples with f_H from 0.21 to 0.67 form both lamellar (major component) and cylindrical (minor component) structures reflecting both the statistical manner of hydrolysis reaction and the possible localized distribution of H sequence.     

Flammability behavior of fiber–fiber hybrid fabrics and composites

The effect of heat flux levels on burning behavior and heat transmission properties of hybrid fabrics and composites has been investigated using cone calorimeter and heat transmission techniques. The hybrid fabric structures woven out of E‐glass (warp) and polyether ether ketone (PEEK) (weft) and E‐glass (warp) and polyester (weft) have been studied at high heat flux levels keeping in view the flame retardant requirements of structural composites. The performance of the glass–PEEK fabric even at high heat flux levels of 75 kW/m² was comparable with the performance of glass–polyester fabric evaluated at 50 kW/m². The results further demonstrate that glass–PEEK hybrid fabrics exhibit low peak heat release rate, low heat release rate, low heat of combustion, suggesting an excellent combination of materials and fall under the low‐risk category and are comparable with the performance of carbon fiber‐epoxy‐based systems. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Experimental investigation on the stability of bride girder against tsunami forces

Bridges are the most useful part in the transportation network. Any disruption of the bridge structures may hamper the whole transportation system. In the last recent tsunamis, numerous number of bridges were structurally damaged by the tsunami waves. Lack of proper provisions of tsunami forces in the design guidelines also contributes to the augmentations of the damage level. Therefore, proper evaluation of the tsunami forces on the bridge girder should be introduced in the design promptly. In this study, laboratory experiments were carried out to reveal the damage mechanism of the bridge girder by assessing the exerted tsunami forces. Both broken and unbroken waves were considered for the analysis. The results showed that measured forces were larger for broken waves than those of unbroken waves. Maximum force of the broken waves was 4.59 times as large as the hydrostatic pressure. Also, waves reached the peak value more rapidly for larger wave heights than those of smaller ones. Additionally, a girder that is placed at a higher position is much vulnerable to tsunami hazard.     

Thermal and related studies of some zirconia gels

The thermal properties of a number of zirconia gels, prepared with various precipitants, have been studied by thermogravimetry, differential thermal analysis and evolved gas analysis. The results obtained show that ligands derived from the various precipitants are incorporated in these gels and strongly influence their high temperature behaviour. The observed properties are interpreted on the basis of a defect structure involving O^2- vacancies generated through the removal of these ligands at higher temperatures.     

Flexible and Conductive 3D Printable Polyvinylidene Fluoride and Poly(N,N‐dimethylacrylamide) Based Gel Polymer Electrolytes

In this work, 3D printable gel polymer electrolytes (GPEs) based on N,N‐dimethylacrylamide (DMAAm) and polyvinylidene fluoride (PVDF) in lithium chloride containing ethylene glycol solution are synthesized and their physicochemical properties are investigated. 3D printing is carried out with a customized stereolithography type 3D gel printer named “Soft and Wet Intelligent Matter‐Easy Realizer” and free forming GPE samples having variable shapes and sizes are obtained. Printed PVDF/PDMAAm‐based GPEs exhibit tunable mechanical properties and favorable thermal stability. Electrochemical proprieties of the printed GPEs are carried out via impedance spectroscopy in the temperature range of 25–90 °C by varying PVDF content. Ionic conductivity as high as 6.5 × 10^?4 S cm^?1 is achieved at room temperature for GPE containing low PVDF content (5 wt%) and conductivity of the GPEs is increased as temperature rises.     

Targeting S100A9 Reduces Neutrophil Recruitment,Inflammation and Lung Damage in Abdominal Sepsis

S100A9, a pro-inflammatory alarmin, is up-regulated in inflamed tissues. However, the role of S100A9 in regulating neutrophil activation, inflammation and lung damage in sepsis is not known. Herein, we hypothesized that blocking S100A9 function may attenuate neutrophil recruitment in septic lung injury. Male C57BL/6 mice were pretreated with the S100A9 inhibitor ABR-238901 (10 mg/kg), prior to cercal ligation and puncture (CLP). Bronchoalveolar lavage fluid (BALF) and lung tissue were harvested for analysis of neutrophil infiltration as well as edema and CXC chemokine production. Blood was collected for analysis of membrane-activated complex-1 (Mac-1) expression on neutrophils as well as CXC chemokines and IL-6 in plasma. Induction of CLP markedly increased plasma levels of S100A9. ABR-238901 decreased CLP-induced neutrophil infiltration and edema formation in the lung. In addition, inhibition of S100A9 decreased the CLP-induced up-regulation of Mac-1 on neutrophils. Administration of ABR-238901 also inhibited the CLP-induced increase of CXCL-1, CXCL-2 and IL-6 in plasma and lungs. Our results suggest that S100A9 promotes neutrophil activation and pulmonary accumulation in sepsis. Targeting S100A9 function decreased formation of CXC chemokines in circulation and lungs and attenuated sepsis-induced lung damage. These novel findings suggest that S100A9 plays an important pro-inflammatory role in sepsis and could be a useful target to protect against the excessive inflammation and lung damage associated with the disease.     

Synthesis of a polyaminophosphonate and its evaluation as an antiscalant in desalination plant

The cationic monomer, N,N‐diallyl‐3‐(diethylphosphonato)propylammonium chloride, was cyclopolymerized in aqueous solutions using t‐butylhydroperoxide (TBHP) or ammonium persulfate (APS) as initiators to afford a cationic polyelectrolyte (CPE) having a (diethylphosphonato)propyl pendent. The CPE on acidic hydrolysis of the diester groups gave pH‐responsive polyzwitterionic acid (PZA) which on treatment with one and two equivalents NaOH gave zwitterionic/anionic polyelectrolyte (ZAPE) and dianionic polyelectrolyte (DAPE), respectively. The solution properties of the CPE, PZA, ZAPE, and DAPE were investigated in detail by viscometric technique. For the purpose of comparison, the solution properties of the polymers were correlated to a structurally similar polyzwitterion (PZ) having monoethylphosphonate and NH⁺ groups. When performance evaluation was carried out for application in reverse osmosis (RO) plants, DAPE at a concentration of 10 ppm in brackish water feed proved very effective as an inhibitor against calcium sulfate scale. POLYM. ENG. SCI., 54:166–174, 2014. © 2013 Society of Plastics Engineers     

Electrochemical Impedance Spectroscopic Analysis of Sensitization-Based Solar Cells

Electrochemical impedance spectroscopy (EIS) is a very powerful tool for elucidation of charge transfer and transport processes in sensitization-based solar cells (e.g., dye-sensitized solar cells [DSSCs], quantum dot-sensitized solar cells [QDSSCs], and perovskite solar cells [PSCs]). EIS measures the electrochemical response to small amplitude AC signals over a wide range of frequencies. Analysis of the EIS response provides information about the corresponding parameters of the cells. Here, we review the fundamentals of EIS, charge transport kinetic processes, and equivalent circuit models of sensitization-based solar cells and use these concepts to explain the EIS spectra of DSSCs, QDSSCs, and PSCs. This review will be very useful for understanding the fundamental charge transfer and transport processes in different sensitization-based solar cells and the use of an equivalent circuit model to interpret the observed charge transfer and reactions.     

Magnetic Nanoparticle Arrays Self-Assembled on Perpendicular Magnetic Recording Media

We study magnetic-field directed self-assembly of magnetic nanoparticles onto templates recorded on perpendicular magnetic recording media, and quantify feature width and height as a function of assembly time. Feature widths are determined from Scanning Electron Microscope (SEM) images, while heights are obtained with Atomic Force Microscopy (AFM). For short assembly times, widths were ~150 nm, while heights were ~14 nm, a single nanoparticle on average with a 10:1 aspect ratio. For long assembly times, widths approach 550 nm, while the average height grows to 3 nanoparticles, ~35 nm; a 16:1 aspect ratio. We perform magnetometry on these self-assembled structures and observe the slope of the magnetic moment vs. field curve increases with time. This increase suggests magnetic nanoparticle interactions evolve from nanoparticle–nanoparticle interactions to cluster–cluster interactions as opposed to feature–feature interactions. We suggest the aspect ratio increase occurs because the magnetic field gradients are strongest near the transitions between recorded regions in perpendicular media. If these gradients can be optimized for assembly, strong potential exists for using perpendicular recording templates to assemble complex heterogeneous materials.