Exact radon rebinning algorithm for the long object problem in helical cone-beam CT

This paper addresses the long object problem in helical cone-beam computed tomography. We present the PHI-method, a new algorithm for the exact reconstruction of a region-of-interest (ROI) of a long object from axially truncated data extending only slightly beyond the ROI. The PHI-method is an extension of the Radon-method, published by Kudo, Noo, and Defrise in issue 43 of journal Physics in Medicine and Biology. The key novelty of the PHI-method is the introduction of a virtual object fpsi(x) for each value of the azimuthal angle psi in the image space, with each virtual object having the property of being equal to the true object f(x) in some ROI omegam. We show that, for each psi, one can calculate exact Radon data corresponding to the two-dimensional (2-D) parallel-beam projection of fpsi(x) onto the meridian plane of angle psi. Given an angular range of length pi of such parallel-beam projections, the ROI omegam can be exactly reconstructed because f(x) is identical to fpsi(x) in Omegam. Simulation results are given for both the Radon-method and the PHI-method indicating that 1) for the case of short objects, the Radon- and PHI-methods produce comparable image quality, 2) for the case of long objects, the PHI-method delivers the same image quality as in the short object case, while the Radon-method fails, and 3) the image quality produced by the PHI-method is similar for a large range of pitch values.     

Effect of temperature and growth media on the attachment of Listeria monocytogenes to stainless steel

Listeria monocytogenes ATCC 19111 cultivated in nutrient-rich medium (brain heart infusion, BHI) or starved in minimal medium (10% filter sterilized pond water and 90% sterilized distilled water) were investigated for their initial attachment to austenitic stainless steel No. 4 with satin finish at 4 °C, 20 °C, 30 °C, 37 °C, or 42 °C. A droplet (10 μl) containing  10⁷ CFU/ml of L. monocytogenes suspended in BHI or minimal medium was placed on the stainless steel surface. After holding in saturated humidity for 3 h at the desired temperature the surface was washed and prepared for scanning electron microscopy (SEM). Using SEM, attachment of L. monocytogenes was determined by counting cells remaining on the surface. When L. monocytogenes cultivated in BHI were used, with the exception of the number of attached cells being lower at 42 °C than at 37 °C and 30 °C, the number of attached cells increased with increasing temperature (P < 0.05). When L. monocytogenes starved in minimal medium were used, the number of attached cells also increased with increasing attachment temperature (P < 0.05), but the number of attached cells at 42 °C was lower than that at the other temperatures. The attachment of L. monocytogenes to stainless steel surface was greater when cultivated in rich medium of BHI vs starved in the minimal medium.     

Thermal analysis of 9977 radioactive material package

The 9977 package is a certified type B transportation packaging that was designed to transport radioactive materials with a decay heat load of up to 19?W. The packaging was recently modified to accommodate increased content heat load (up to 38?W) by employing an aluminium heat dissipating sleeve outside the containment vessel (CV), as well as an aluminium spacer inside the CV holding two 3013 containers. This paper provides highlights of thermal analyses of the modified 9977 package that were performed to evaluate its compliance with the 10 CFR 71 regulatory safety requirements. Parametric studies were also performed to examine effects of (i) surface properties, e.g. light absorptivity and emissivity, of the packaging; (ii) total decay heat loads, ranging from 18 to 38?W; and (iii) distribution of decay heat load inside the CV on the temperature of the Viton O-ring seal. The results of thermal analyses show that for the normal condition of transport with insolation, increasing absorptivity and decreasing emissivity increase the temperature of the O-ring; decreasing heat load decreases the temperature of the O-ring, whereas changing heat load distribution has little effect on the temperature of the O-ring. Likewise, changing the thermal conductivity of the spacer inside the CVhas little effect on the temperature of the O-ring. Briefly discussed is the possible extension of the annual maintenance interval of the 9977 package, based on previous work and the data obtained in the long-term leak performance tests conducted by the Savannah River National Laboratory.     

Two-step purification strategy for enhanced recovery of recombinant hepatitis B surface antigen from Pichia pastoris

Univariate screening on factors affecting the purification performance of recombinant hepatitis B surface antigen (HBsAg) on ion exchange chromatography (IEC) and size exclusion chromatography (SEC) and the establishment of a two-step purification strategy were performed. Amongst four IEC adsorbents examined, the use of Q Sepharose XL IEC adsorbent under optimized conditions together with optimized SEC purification was able to efficiently purify HBsAg. An established purification strategy comprising the two techniques further demonstrated adaptability for scale-up operations with a final total purification factor (PF) of 94.82 ± 16.20, HBsAg purity of 95.48% and recovery yield of 78.07%.     

Heat transfer and fluid flow of nanofluids in laminar radial flow cooling systems

Nanofluids are considered as interesting alternatives to conventional coolants. It is well known that traditional fluids have limited heat transfer capabilities when compared to common metals. It is therefore quite conceivable that a small amount of extremely fine metallic particles placed in suspension in traditional fluids will considerably increase their heat transfer performances. A numerical investigation into the heat transfer enhancement capabilities of coolants with suspended metallic nanoparticles inside a radial, laminar flow cooling configuration is presented. Temperature dependant nanofluid properties are evaluated from experimental data available in recent literature. Results indicate that considerable heat transfer increases are possible with the use of relatively small volume fractions of nanoparticles. Generally, however, these are accompanied by considerable increases in wall shear-stress. Results also show that predictions obtained with temperature variable nanofluid properties yield greater heat transfer capabilities and lower wall shear stresses when compared to predictions using constant properties.     

Low energy electron storage ring with tunable compaction factor

A low energy electron storage ring is designed to have many desirable properties, such as varying momentum compaction factor, damping partition numbers, favorable betatron tunes for multiturn accumulations, and excellent dynamic aperture. This storage ring can be used for debunching rf linac beams in one turn, for compression of linac pulses, and more importantly for a compact photon source based on inverse Compton scattering of laser beams.     

Nitric oxide-producing neurons remain intact after small bowel transplantation

This study documents the fate of nitric oxide neurons following small bowel transplantation. Heterotopic, syngeneic small bowel transplants were performed in five male Lewis rats. The grafts were harvested 7, 36, 55, 60, and 65 days postoperatively, together with the native bowel for comparison. NADPH diaphorase staining of cryostat sections was used to identify the nitric oxide-producing neurons. NADPH diaphorase activity was concentrated in the myenteric plexus, deep muscular, and submucous plexus. No differences were detected between the transplanted and native bowel at any time after transplantation. This suggests that nitric-oxide-producing neurons are well preserved after transplantation and that posttransplant dysmotility is probably not related to interrupted nitric oxide innervation.     

Minor components in the sex pheromone of legume podborer: Maruca vitrata development of an attractive blend

The legume podborer, Maruca vitrata (syn. M. testulalis) (F.) (Lepidoptera: Pyralidae) is a pantropical pest of legume crops. Sex pheromone was collected by gland extraction or trapping of volatiles from virgin female moths originating in India, West Africa, or Taiwan. Analysis by GC-EAG and GC-MS confirmed previously published findings that (E,E)-10,12- hexadecadienal is the most abundant EAG-active component with 2–5% of (E,E)-10,12-hexadecadienol also present. At least one other EAG response was detected at retention times typical of monounsaturated hexadecenals or tetradecenyl acetates, but neither could be detected by GC-MS. Laboratory wind-tunnel bioassays and a field bioassay of blends of (E,E)-10,12-hexadecadienal with (E,E)-10,12-hexadecadienol and a range of monounsaturated hexadecenal and tetradecenyl acetate isomers indicated greatest attraction of males was to those including (E,E)-10,12-hexadecadienol and (E)-10-hexadecenal as minor components. In subsequent trapping experiments in cowpea fields in Benin, traps baited with a three-component blend of (E,E)-10,12-hexadecadienal and these two minor components in a 100:5:5 ratio caught significantly more males than traps baited with the major component alone, either two-component blend, or virgin female moths. Further blend optimization experiments did not produce a more attractive blend. No significant differences in catches were found between traps baited with polyethylene vials or rubber septa, or between lures containing 0.01 and 0.1 mg of synthetic pheromone. Significant numbers of female M. vitrata moths, up to 50% of total catches, were trapped with synthetic blends but not with virgin females. At present there is no clear explanation for this almost unprecedented finding, but the phenomenon may improve the predictive power of traps for population monitoring.     

Effect of nano‐silica filler on the rheological and morphological properties of polypropylene/liquid‐crystalline polymer blends

A fumed hydrophilic nano‐silica‐filled polypropylene (PP) composite was blended with a liquid‐crystalline polymer (LCP; Rodrun LC5000). The preblended polymer blend was extruded through a capillary die; this was followed by a series of rheological and morphological characterizations. The viscosity of the PP matrix increased with the addition of the hydrophilic nano‐silica. At shear rates between 50 and 200 s^?1, the composite displays marked shear‐thinning characteristics. However, the incorporation of LC5000 in the PP composite eliminated the shear‐thinning characteristic, which suggests that LC5000 destroyed the agglomerated nano‐silica network in the PP matrix. Although the viscosity ratio of LCP/PP was reduced after the addition of nano‐silica fillers, the LCP phases existed as droplets and ellipsoids. The nano‐silicas were concentrated in the LC5000 phase, which hindered the formation of LCP fibers when processed at high shear deformation. We carried out surface modification of the hydrophilic nano‐silica to investigate the effect of modified nano‐silica (M‐silica) on the morphology of the PP/LC5000 blend system. Ethanol was successfully grafted onto the nano‐silica surface with a controlled grafting ratio. The viscosity was reduced for PP filled with ethanol‐M‐silica when compared to the system filled with untreated hydrophilic nano‐silica. The LC5000 in the (PP/M‐silica)/LC5000 blend existed mainly in the form of fibrils. At high shear rates (e.g., 3000 s^?1), the LC5000 fibril network was formed at the skin region of the extrudates. The exclusion of nano‐silica in the LC5000 phase and the increased viscosity of the matrix were responsible for the morphological changes of the LCP phase. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1484–1492, 2003     

Relationship between processing,microstructure, and mechanical properties of injection molded thermotropic LCP

A commercial thermotropic liquid crystalline polymer (LCP), Vectra A950, was injection molded into rectangular sheets of thickness ranging from 1 to 4 mm. By changing the thickness of the mold, the shear rate experienced by the TLCP melt in the mold could be varied. The 1‐mm test sample was highly anisotropic while that with larger thickness (4 mm) was less anisotropic. X‐ray diffraction profile at various depths for each of the test sample corresponded to the degree in the fiber orientation present in the test samples. The anisotropy can be described macroscopically by measuring the tensile strength and modulus in the longitudinal and transverse direction. The ratio between the longitudinal and transverse property decreases proportionally to the thickness of the test sample. This reduction corresponded to the reduction in the shear field as the thickness of the mold was increased. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1713–1718, 2003