The role of the ratio (PEG:PPG) of a triblock copolymer (PPG‐b‐PEG‐b‐PPG) in the cure kinetics,miscibility and thermal and mechanical properties in an epoxy matrix

The aim of this study was to evaluate the role of different poly(ethylene glycol):poly(propylene glycol) (PEG:PPG) molar ratios in a triblock copolymer in the cure kinetics, miscibility and thermal and mechanical properties in an epoxy matrix. The poly(propylene glycol)‐block‐poly(ethylene glycol)‐block‐poly(propylene glycol) (PPG‐b‐PEG‐b‐PPG) triblock copolymers used had two different molecular masses: 3300 and 2000 g mol^?1. The mass concentration of PEG in the copolymer structure played a key role in the miscibility and cure kinetics of the blend as well as in the thermal–mechanical properties. Phase separation was observed only for blends formed with the 3300 g mol^?1 triblock copolymer at 20 wt%. Concerning thermal properties, the miscibility of the copolymer in the epoxy matrix reduced the T_g value by 13 °C, although a 62% increase in fracture toughness (K_IC) was observed. After the addition of PPG‐b‐PEG‐b‐PPG with 3300 g mol^?1 there was a reduction in the modulus of elasticity by 8% compared to the neat matrix; no significant changes were observed in T_g values for the immiscible system. The use of PPG‐b‐PEG‐b‐PPG with 2000 g mol^?1 reduced the modulus of elasticity by approximately 47% and increased toughness (K_IC) up to 43%. Finally, for the curing kinetics of all materials, the incorporation of the triblock copolymer PPG‐b‐PEG‐b‐PPG delayed the cure reaction of the DGEBA/DDM (DGEBA, diglycidyl ether of bisphenol A; DDM, Q3‐4,4′‐Diaminodiphenylmethane) system when there is miscibility and accelerated the cure reaction when it is immiscible. All experimental curing reactions could be fitted to the Kamal autocatalytic model presenting an excellent agreement with experimental data. This model was able to capture some interesting features of the addition of triblock copolymers in an epoxy resin. © 2018 Society of Chemical Industry     

Improvement of the short‐ and long‐term mechanical properties of injection‐molded poly(etheretherketone) and hydroxyapatite nanocomposites

Nanocomposites of polyetheretherketone (PEEK) and hydroxyapatite (HA) nanoparticles treated with a silane coupling agent were successfully prepared by twin screw extrusion and injection molding. Some of the samples were annealed after the injection molding. The silane treatment promoted an improvement of the short‐ and long‐term mechanical properties of the nanocomposites. A higher stress and a six times higher deformation at break and a higher impact strength were observed in the silane‐treated nanocomposites when compared to the nontreated ones. The number of cycles to fail of the treated nanocomposites was almost 200% higher than the number of cycles to fail of the nontreated samples. The treatment also decreased the glass transition temperature and amount of crystallinity of the samples. This improvement in mechanical properties obtained from the silane treatment was attributed to the strengthening of the PEEK/HA interfacial bond, to the plasticization of the PEEK matrix by silane oligomers produced during the processing and to a better dispersion of the HA nanoparticles within the PEEK matrix. Samples annealing, however, diminished all these properties due to the increase in crystallinity. Studies of the short‐ and long‐term mechanical properties of these nanocomposites under physiological conditions and of the proliferation of stem cells are under way. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44476.     

Laccase‐containing ureasil–polymer composite as the sensing layer of an amperometric biosensor

Innovative amperometric biosensors for monitoring the level of wastewater pollution have been constructed on the surface of the gold planar electrodes C220AT “DropSens” by using the organic–inorganic ureasil‐based composites as host matrixes and immobilized commercial laccase from Trametes versicolor . It was found that the biosensor based on the ureasil–chalcogenide glass composite is characterized by a very high sensitivity (67,540 А M^?1 m^?2) that is 38.3 times higher than for pure ureasil (the sensitivity of the bioelectrode was calculated as 1762 А M^?1 m^?2). On the other hand, application of the ureasil–chalcogenide glass composite with incorporated silver nanoparticles (NPs) synthesized by high‐dose (1.0 × 10¹⁷ Ag⁺/cm²) 30 keV Ag⁺ ion implantation results in decreasing the biosensor sensitivity up to 2390 times (the sensitivity of the bioelectrode was 28.3 А M^?1 m^?2). The role of additives (chalcogenide glass and silver NPs) in the ureasil matrix on the biofunctionality of the biosensors produced is considered. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45278.     

Resting energy expenditure and carbohydrate oxidation are higher in elderly patients with COPD: a case control study

ABSTRACT: BACKGROUND: Elderly patients with chronic obstructive pulmonary disease (COPD) usually have a compromised nutritional status which is an independent predictor of morbidity and mortality. To know the Resting Energy Expenditure (REE) and the substrate oxidation measurement is essential to prevent these complications. This study aimed to compare the REE, respiratory quotient (RQ) and body composition between patients with and without COPD. METHODS: This case-control study assessed 20 patients with chronic obstructive pulmonary disease attending a pulmonary rehabilitation program. The group of subjects without COPD (control group) consisted of 20 elderly patients attending a university gym, patients of a private service and a public healthy care. Consumption of oxygen (O2) and carbon dioxide (CO2) was determined by indirect calorimetry and used for calculating the resting energy expenditure and respiratory quotient. Body mass index (BMI) and waist circumference (WC) were also measured. Percentage of body fat (%BF), lean mass (kg) and muscle mass (kg) were determined by bioimpedance. The fat free mass index (FFMI) and muscle mass index (MMI) were then calculated. Results: The COPD group had lower BMI than control (p=0.02). However, WC, % BF, FFMI and MM-I did not differ between the groups. The COPD group had greater RQ (p=0.01), REE (p=0.009) and carbohydrate oxidation (p= 0.002). Conclusions: Elderly patients with COPD had higher REE, RQ and carbohydrate oxidation than controls.     

Cover Image,Volume 66, Issue 10

The cover image, by Bruna A. Bregadiolli et al., is based on the Research Article Towards the synthesis of poly(azafulleroid)s: main chain fullerene oligomers for organic photovoltaic devices, DOI: 10.1002/pi.5419 .

     

I2-doped and pyrrole ring-iodinated semi-conducting oligomers of N-vinyl-3-alkyl-2-phenylpyrroles

I₂-doped and pyrrole ring-iodinated semi-conducting oligomers of N-vinyl-3-alkyl-2-phenylpyrroles have been synthesized by free-radical polymerization of the above monomers (AIBN, 2–5 wt%, 60–80 °C) and further exposure of the oligomers obtained to I₂ vapor. The parent oligomers exhibit paramagnetic and fluorescent properties and stable up to 300–370 °C.     

Factors affecting glaze transparency of ceramic tiles manufactured by the single firing technique

Transparency is an extremely important optical property of several glazes used in the ceramic tile sector. The present work aimed to identify the causes of loss of transparency presented by some ceramic glazes composed of frits with chemical compositions typical of optically transparent glasses. After identifying the causes of low transparency presented by several ceramic glazes based on microstructural analyses, X-ray diffraction and scanning electron microscopy, attempts were made to increase the transparency of these glazes by altering their chemical compositions. The results suggest that the addition of alumina – through distinct mineral sources – may be an interesting alternative to prevent the crystallization of calcium silicates, which reduce the transparency of glazes used in the ceramic tile sector.     

Investigation the correlation between chemical structure and swelling,thermal and flocculation properties of carboxymethylcellulose hydrogels

Hydrophilic polymer networks (hydrogels) based on sodium carboxymethylcellulose (NaCMC) and polycarboxylic acids (oxalic, succinic, citric and adipic) as cross-linking agents are synthesized by esterification reaction; one series of NaCMC hydrogels cross-linked with citric acid is prepared with acrylamide and acrylic acid (Aam/Aac) copolymers using the design of semi-interpenetrating polymer networks (semi-IPN), in order to increase their potential application for flocculation purposes. The Infrared spectroscopy (FTIR) of hydrogels confirms the esterification reaction between NaCMC and cross-linking agents. Results of swelling measurements show that citric acid in the amount of 15 wt% gives the hydrogels with the best absorption capacity. The results of Differential scanning calorimetry (DSC) and Thermal gravimetric analysis (TGA) show no significant difference in thermal properties of neat and semi-interpenetrating NaCMC hydrogels. The amorphous nature of hydrogels is confirmed by X-ray diffraction analysis (XRD). The results of flocculation study show that combination of NaCMC network and Aam/Aac copolymer with initial mass ratio of 10/90 creates a theoretical platform for the production of flocculant which could show high efficacy in purifying of water dominated by positively charged particles.