On symbolic manipulation and code generation of a hybrid three-dimensional solid element

A symbolic procedure is utilized to derive the analytical expressions of the component matrices resulting to the closed-form integration of a stiffness matrix of a hybrid finite element. In order to alleviate the expression growth problem, we employ special techniques, including the use of symmetry conditions, pattern search, and introduction of intermediate variables, so that the final form of the derived stiffness matrix is suitable for coding implementation. Application of the symbolic procedure is made on a hybrid three-dimensional 8-node solid element. The same procedure is equally applicable to other types of hybrid elements.     

Further result on a dynamic recurrent neural-network-based adaptive observer for a class of nonlinear systems

In Kim et al. [(1997) A dynamic recurrent neural-network-based adaptive observer for a class of nonlinear systems. Automatica 33(8), 1539–1543], authors present an excellent neural network (NN) observer for a class of nonlinear systems. However, the output error equation in their paper is strictly positive real (SPR) which is restrictive assumption for nonlinear systems. In this note, by introducing a vector b₀ and Lyapunov equation, the observer design is obtained without requiring the SPR condition. Thus, our observer can be applied to a wider class of systems.     

电动缸式钢包长水口机械手的技术改造

介绍了宝钢5号连铸机钢包长水口机械手的设备构成及技术性能,阐述设备长时间运行所存在的问题,针对问题提出了设备改进的措施。     

蒲石河抽水蓄能电站计算机监控系统控制流程设计

简述了蒲石河抽水蓄能电站概况,介绍了蒲石河抽水蓄能电站计算机监控系统控制流程的设计原则、结构配置、优先级和特殊点,并简要分析了该控制流程的功能特点。蒲石河抽水蓄能电站计算机监控系统控制流程采用了模块化、灵活性、容错性、优先性、独立性、可扩性和安全可靠性等设计原则,实现了容错功能和控制冗余功能,保证了电厂的安全、高效运行,完全能够满足蒲石河抽水蓄能电站对生产设备全面监视和控制的要求,是一种比较先进、可靠的抽水蓄能电站监控系统控制流程。     

CAD设计中的复杂曲线图的绘制

将计算得到的大量数据,通过短小的接口Lisp程序的转化,在CAD制图环境中绘制较复杂的曲线图,以解决实际生产需求.     

Design optimization and cold RF test of a 2.6-cell cryogenic RF gun

To further improve the performance of acceler-ators, the first cryogenic normal-conducting RF gun in China was designed and manufactured. As a new and attractiv...     

直流输电系统用直流分压器现场检测方法研究

对直流输电系统中所用直流分压器设备的准确度进行现场检测,目前国内还没有检定规程或校准规范和实施程序。根据现场环境,提出使用桥式电阻分压器自校准的方法,提出现场实施程序,注意事项,主要仪器的选型及误差分析,分析了现场存在的影响因素,以及影响程度,并完成模拟现场环境的验证试验,试验数据表明,该方法及其实施过程符合直流分压器现场检测要求,对现场检测试验具有指导意义,并可为实验室检定提供参考价值。     

An Ultra-Low-Power Embedded EEPROM for Passive RFID Tags

采用Chartered 0.35μm EEPROM工艺设计并实现了一个适用于无源射频电子标签的256位超低功耗EEPROM存储器.芯片实现了块编程和擦写功能,并通过优化敏感放大器和控制逻辑的结构,实现了读存储器时间和功耗的最优化.最后给出了芯片在编程/擦写/读操作情况下的功耗测试结果.在电源电压为1.8V,数据率为640kHz时,EEPROM编程/擦写的平均功耗约为68μA,读操作平均功耗约为0.6μA.     

Solvent-vapor induced self-assembly of a conjugated polymer: A correlation between solvent nature and transistor performance

A systematical investigation on solvent-vapor annealing in polymer thin film transistors is performed using a thiazolothiazole-bithiazole conjugated polymer as the active layer. Film morphology, packing order and device performance are closely related to polarity and solubility parameter of the annealing solvent and annealing time. The formation of highly ordered and closely connected fibrillar domains is realized by using a solvent with similar solubility parameter and polarity to the conjugated polymer. Field-effect transistors based on pristine polymer films exhibit a highest charge carrier mobility of 0.0067 cm² V⁻¹ s⁻¹. After solvent vapor annealing with THF for 48 h, the mobility boosts up to 0.075 cm² V⁻¹ s⁻¹. This correlation between solvent polarity, solubility parameter and film morphology, packing order and mobility provides a useful guideline towards high performance polymer thin film transistors with solvent-vapor annealing method.     

怀柔广延大气簇射探测阵列

本文介绍了1988年投入运行的怀柔广延大气簇射(EAS)阵列的设备构成、工作原理、性能指标及原始数据的记录处理方式。各种检验和首批EAS观测数据表明,该阵列可有效地用于对能量在10~(15)—7×10~(16)eV范围的EAS的探测和研究。