Electroluminescent zinc sulphide devices produced by sol-gel processing

Zinc sulphide thin film electroluminescent devices doped with Mn or Tb have been produced on p-type Si substrates using a process in which doped zinc oxide films are deposited by a sol-gel drain coating method from a solution of zinc acetate containing a manganese or terbium dopant. The films are then converted to ZnS by heating them in an atmosphere containing hydrogen sulphide which replaces the oxygyn with sulphur. The composition, crystalline structure and optical properties of films have shown that complete conversion from the oxide to the sulphide takes place. The luminescent characteristics of the devices so produced have been measured as a function of the doping concentrations, film thickness, insulator thickness and driving voltage and frequency. It has been found that yellow or green luminescence can be obtained using Mn or Tb doping respectively.     

非线性隔振理论初探

本文以线必阻尼，立方刚度非线性系统为例，对非线性隔振理论进行了初步探讨，导出了系统的无量纲运动响应和传递率，并与线性隔振系统进行了比较，着重讨论了非线性对它们的影响，获得了一些有用的结论。     

一种获得透视图的新方法

依据物体透视图的人工作图法，本文提出了确定透视变换矩阵的新方法，这种方法基于一组新的参数，而每个参数与透视变换的结果有明显关系，因此便于使用，并给出了计算机作图示例。     

智能控制在回转窑配料系统中的应用

本文介绍智能控制在回转窑配料系统中的应用情况，并阐述该控制器设计、构成、软件系统特点及现场运行效果。     

使用光纤放大器的频分复用光纤传输系统

报道了一个使用光纤放大器的两路非相干频分复用光纤传输实验系统。系统采用国产ＤＦＢ激光器作光源，用意大利生产的光纤放大器作在线放大器，用自制的光学谐振腔作光学滤波器和解复用器，采用ＦＳＫ调制制式，将１４０Ｍｂ／ｓ非归零伪随机码传输了５０公里，得到了很好的眼图。在频道间距为１０ＧＨｚ情况下，未观测到邻道干扰和光纤放大器的非线性现象。     

Structured genetic algorithm for robust H∞ controlsystems design

A structured genetic algorithm (SGA) approach is developed for robust controller design based on the concept of an H^∞ loop-shaping technique and the method of inequalities. Such an SGA is capable of simultaneously searching the orders and coefficients of the precompensator and postcompensator for the weighted plant. It is, therefore, not necessary to predefine the order of compensators as in usual practice. A multiple objective ranking approach is also incorporated so that the design criteria of extreme plants can be easily achieved. The effectiveness of such a technique is illustrated by a high-purity distillation column design example     

Genetic algorithms: concepts and applications [in engineeringdesign]

This paper introduces genetic algorithms (GA) as a complete entity, in which knowledge of this emerging technology can be integrated together to form the framework of a design tool for industrial engineers. An attempt has also been made to explain “why” and “when” GA should be used as an optimization tool     

MOS控制晶闸管的三重扩散工艺研究

本文对ＭＣＴ的核心工艺－三重扩散工艺进行了详细研究。通过ＳＵＰＲＥＭ－Ⅲ计算机工艺仿真，获得了三重扩散的工艺条件。     

离子注入对Cr12MoV钢表面组织结构和力学性能的影响

研究了Ｃｒ１２ＭｏＶ钢离子注入层的显微组织特征及其对表面性能的影响。结果表明，离子注入使Ｃｒ１２ＭｏＶ钢的表面硬度和耐磨性能得到显著改善，且存在着一个最佳的注入剂量，约为３×１０＾１＾７Ｎ＾＋／ｃｍ＾２左右。离了注入在Ｃｒ１２ＭｏＶ钢表面层中形成了大量细小弥散的第二相粒子，并使α－Ｆｅ晶格发生严重畸变，从而引起材料表面强化。     

Triangular ray-tube analysis of dielectric lens antennas

A new method of analysis for the radiation characteristics of dielectric lens antennas with arbitrary inner and outer surfaces is presented. The analysis is based on representing the feed illumination by a contiguous set of ray tubes and including the effects of surface reflections and ray divergence. Radiation patterns and the antenna gain are then computed by evaluating the closed-form expressions developed for the Kirchhoff's integral of the aperture fields. The validity of the analysis method has been demonstrated by comparing the computations with measured results of two different spherical lenses and a shaped lens configurations. The analysis method presented takes into account some of the practical aspects associated with lens design such as surface zoning to reduce the mass and surface matching to minimize the reflection loss