Perovskite SrFe1-xTixO3-δ (x < = 0.1) cathode for low temperature solid oxide fuel cell

Stable and compatible cathode materials are a key factor for realizing the low-temperature (LT, ≤600?°C) operation and practical implementations of solid oxide fuel cells (SOFCs). In this study, perovskite oxides SrFe_1-xTi_xO_3-δ (x?< = 0.1), with various ratios of Ti doping, are prepared by a sol-gel method for cathode material for LT-SOFCs. The structure, morphology and thermo-gravimetric characteristics of the resultant SFT powders are investigated. It is found that the Ti is successfully doped into SrFeO_3-δ to form a single phase cubic perovskite structure and crystal structure of SFT shows better stability than SrFeO_3-δ. The dc electrical conductivity and electrochemical properties of SFT are measured and analysed by four-probe and electrochemical impedance spectra (EIS) measurements, respectively. The obtained SFT exhibits a very low polarization resistance (R_p), .01 Ωcm² at 600?C. The SFT powders using as cathode in fuel cell devices, exhibit maximum power density of 551?mW?cm^?2 with open circuit voltage (OCV) of 1.15?V at 600?C. The good performance of the SFT cathode indicates a high rate of oxygen diffusion through the material at cathode. By enabling operation at low temperatures, SFT cathodes may result in a practical implementation of SOFCs.     

Thermal-stability of electric field-induced strain and energy storage density in Nb-doped BNKT-ST piezoceramics

In this work, the relationship between the structural mechanisms and macroscopic electrical properties of the Nb-modified 0.96(Bi_0.5Na_0.84K_0.16TiO₃)–0.04SrTiO₃ (BNKT–ST) system were elucidated by using temperature dependent and in situ synchrotron X-ray diffraction (XRD) techniques. For the composition x?=?0.0175, a large-signal piezoelectric coefficient (S_max/E_max?=?d₃₃*) of 735 pm?V^?1 at 6?kV mm^?1 was observed at room temperature. Interestingly, at a higher temperature of 110?°C, the sample still showed a large d₃₃* of 570 pm V^?1. Furthermore, the temperature-invariant electrostrictive coefficient for this sample was found to be 0.0285?m⁴?C^?2 over the temperature range of 25–170?°C. Moreover, the energy density for x?=?0.030 sample was ～1.0?J?cm^?3 with an energy storage efficiency of ?70% in the temperature range of 25–135?°C. These results suggest that the synthesized Nb-modified BNKT–ST system is promising for the design of ceramic actuators as well as capacitor applications.     

Composite mixed matrix membranes incorporating microporous carbon molecular sieve as filler in polyethersulfone for CO2/CH4 separation

Membrane technology has been considered a key factor for sustainable growth in high-efficiency gas separation. Current mixed matrix membranes (MMMs) technology is rising, but these membranes in the dense structure are having difficulties in operating at high pressures and scale up for commercialization. The purpose of this research is to synthesize composite MMMs (CMMMs) consisting of polyethersulfone (PES), carbon molecular sieve (CMS 1–5 wt %), and Novatex 2471 nonwoven fabric (support layer). The membranes' physical, chemical, and thermal properties were evaluated by different analytical equipment. The morphology of both PES and PES-CMS composite membranes had a porous and asymmetric structure, in which CMS was uniformly distributed in the polymer matrix. The thermal properties showed that the membranes were stable up to 350 °C with a single glass transition temperature. The functional groups in the membrane were confirmed by spectral analysis. The gas performance results showed that carbon dioxide permeance increased with increased CMS concentration and methane permeance decreased due to the hindering effect of CMS under similar operating conditions. The highest selectivity achieved was 12.774 using CMMM of 5 wt % of CMS at 10 bar, which on average was 137.80%, improved selectivity compared to pure PES membrane. The support layer was able to withstand high operating pressures and showed the ability to scale up. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48476.     

Bioaccessibility of carotenoids from plant and animal foods

The frequent consumption of carotenoid-rich foods has been associated with numerous health benefits, such as the supply of provitamin A. To exert these health benefits, carotenoids need to be efficiently liberated from the food matrix, micellized in the small intestine, taken up by the enterocytes and absorbed into the human blood stream. Enormous efforts have been made to better understand these processes. Because human studies are costly, labor-intense and time-consuming, the evaluation of carotenoid liberation and micellization at the laboratory scale using simulated in vitro digestion models has proven to be an important tool for obtaining preliminary results prior to conducting human studies. In particular, the liberation from the food matrix and the intestinal micellization can be mimicked by simulated digestion, yielding an estimate of the so-called bioaccessibility of a carotenoid. In the present review, we provide an overview of the carotenoid digestion process in vivo, the currently used in vitro digestion models and the outcomes of previous bioaccessibility studies, with a special focus on correlations with concomitantly conducted human studies. Furthermore, we advocate for the on-going requirement of better standardized digestion protocols and, in addition, we provide suggestions for the complementation of the acquired knowledge and current nutritional recommendations. © 2018 Society of Chemical Industry     

Carbon nanotubes/nanofibers (CNTs/CNFs): a review on state of the art synthesis methods

Microsystem Technologies - This research article discusses the state of the art synthesis methods for the formation of carbon nanotubes and nanofibers (CNTs/CNFs). Carbon nanotubes have a number of...     

Bibliometric analysis for characterization of oil production in Brazilian territory

Scientometrics - The theme related to the oil production in the Brazilian territory is not limited to the extraction means, distribution and use of this product, and involves political, cultural...     

Recent Developments and Applications of Ionic Liquids in Gas Separation Membranes

Flue gas emissions and the harmful effects of these gases urge to separate and capture these unwanted gases. Ionic liquids due to negligible vapor pressure, thermal stability, and wide electrochemical stability have expanded its application in gas separations. A comprehensive overview of the recent developments and applications of ionic liquid membranes (ILMs) for gas separation is given. The three general classifications of ILMs, such as supported ionic liquid membranes (SILMs), ionic liquid polymeric membranes (ILPMs), and ionic liquid mixed‐matrix membranes (ILMMMs) along with their applications, for the separation of various mixed gases systems is discussed in detail. Furthermore, issues, challenges, computational study, and future perspectives for ILMs are also considered.     

Mapping past,current and future energy research trend in Pakistan: a scientometric assessment

This work describes the contribution of researchers in the field of the energy from Pakistan in the period 1990–2016. A scientometric approach was applied to analyze the scientific publications in the field using the Scopus Elsevier database. Different aspects of the publications were analyzed, such as publication type, major research areas, journals, citations, authorship pattern, affiliations as well as the keyword occurrence frequency. The present research trends are analyzed and future research directions are outlined. The impact factor, h-index and number of citations were used to investigate the strength of active institutes, authors, and journals in the field of the energy in Pakistan. From 1990 to 2016, 991 articles have been published by 2139 authors from 213 research institutes. The total number of citations and impact factor are 10,287 and 2301 respectively, corresponding to 10 citations per paper and an impact factor of 2.32 per publication. The research articles originate primarily from COMSATS, NUST, PIEAS, and PINSTECH. Pakistan has published 60% of publication with the collaboration of the foreign institutes, mainly from the United States, the United Kingdom, China and Malaysia. The core research activities in the field are mainly focused on resource assessment, energy policy, energy efficiency, feasibility study, energy economics, and performance assessment. The most productive journal, author, institution, are renewable & sustainable energy review, Shahbaz M., and COMSATS, respectively.     

光触发增强葡萄糖氧化酶催化活性的等离子体囊泡用于程序化光热-饥饿疗法

在肿瘤的饥饿治疗及协同治疗中,基于葡萄糖氧化酶(GOx)的纳米诊疗剂展现出具大的应用前景.自组装等离子体金囊泡(GV),由于具有独特的光学性能、巨大空腔和强局域表面等离子体共振等特性,可作为协同治疗的多功能纳米载体.本文中,我们开发了一种装载GOx的GV(GV-GOx)用于光触发释放GOx,同时增强GOx的催化活性,从而实现程序化光热-饥饿治疗.在近红外激光照射下,由于GV具有等离子体耦合效应, GV-GOx可以产生很强的局部高热,引起封装的GOx释放,同时高热可提高GOx催化活性,从而增强肿瘤的饥饿效应.此外,高光热效应可促进细胞对GV-GOx的摄取,并可通过活体光声/光热双模态成像对协同治疗进行有效监测.令人印象深刻的是,协同光热/饥饿疗法能完全消融4T1荷瘤小鼠的肿瘤,抗肿瘤效果明显优于单一疗法,且没有明显的系统毒性.本工作展示了一种光触发的纳米平台,可用于癌症协同治疗.