Influence of modern plastic furniture on the fire development in fires in homes: large‐scale fire tests in living rooms

About 80% of all fire fatalities in Germany occur because of fires in homes. It has been known for some time that modern materials (synonym for materials consisting mostly of synthetic polymers) tend to burn differently from older materials (synonym for materials consisting mostly of fibrous cellulosic substances) and it has been acknowledged that the amount of combustible plastics in homes has increased significantly over the last decades. To investigate the influence of modern furniture and ventilation conditions of fires in homes, a series of four large‐scale tests in two living rooms (LRs) with adjacent rooms (ARs) was performed by BAM and the Frankfurt fire service. Two LRs, one with older furniture and one with modern furniture, were tested twice each. Each test started with the ignition of a paper cushion on an upholstered chair. The influence of modern materials on the fire development was investigated, as well as the influence of the ventilation on the fire development. In all settings, an upholstered chair was the first burning item. Results of the test series show that fires in rooms with modern furniture develop faster than fires in rooms with older furniture. This is true for temperature development in the rooms as well as for smoke production.     

Complex‐Shaped Cellulose Composites Made by Wet Densification of 3D Printed Scaffolds

Cellulose is an attractive material resource for the fabrication of sustainable functional products, but its processing into structures with complex architecture and high cellulose content remains challenging. Such limitation has prevented cellulose‐based synthetic materials from reaching the level of structural control and mechanical properties observed in their biological counterparts, such as wood and plant tissues. To address this issue, a simple approach is reported to manufacture complex‐shaped cellulose‐based composites, in which the shaping capabilities of 3D printing technologies are combined with a wet densification process that increases the concentration of cellulose in the final printed material. Densification is achieved by exchanging the liquid of the wet printed material with a poor solvent mixture that induces attractive interactions between cellulose particles. The effect of the solvent mixture on the final cellulose concentration is rationalized using solubility parameters that quantify the attractive interparticle interactions. Using X‐ray diffraction analysis and mechanical tests, 3D printed composites obtained through this process are shown to exhibit highly aligned microstructures and mechanical properties significantly higher than those obtained by earlier additively manufactured cellulose‐based materials. These features enable the fabrication of cellulose‐rich synthetic structures that more closely resemble the exquisite designs found in biological materials grown by plants in nature.     

Ultrathin Polydopamine Films with Phospholipid Nanodiscs Containing a Glycophorin A Domain

Cellular membranes have long served as an inspiration for nanomaterial research. The preparation of ultrathin polydopamine (PDA) films with integrated protein pores containing phospholipids and an embedded domain of a membrane protein glycophorin A as simplified cell membrane mimics is reported. Large area, ultrathin PDA films are obtained by electropolymerization on gold surfaces with 10–18 nm thickness and dimensions of up to 2.5 cm². The films are transferred from gold to various other substrates such as nylon mesh, silicon, or substrates containing holes in the micrometer range, and they remain intact even after transfer. The novel transfer technique gives access to freestanding PDA films that remain stable even at the air interfaces with elastic moduli of ≈6–12 GPa, which are higher than any other PDA films reported before. As the PDA film thickness is within the range of cellular membranes, monodisperse protein nanopores, so‐called “nanodiscs,” are integrated as functional entities. These nanodisc‐containing PDA films can serve as semi‐permeable films, in which the embedded pores control material transport. In the future, these simplified cell membrane mimics may offer structural investigations of the embedded membrane proteins to receive an improved understanding of protein‐mediated transport processes in cellular membranes.     

Autonomous Ultrafast Self‐Healing Hydrogels by pH‐Responsive Functional Nanofiber Gelators as Cell Matrices

The synthesis of hybrid hydrogels by pH‐controlled structural transition with exceptional rheological properties as cellular matrix is reported. “Depsi” peptide sequences are grafted onto a polypeptide backbone that undergo a pH‐induced intramolecular O–N–acyl migration at physiological conditions affording peptide nanofibers (PNFs) as supramolecular gelators. The polypeptide–PNF hydrogels are mechanically remarkably robust. They reveal exciting thixotropic behavior with immediate in situ recovery after exposure to various high strains over long periods and self‐repair of defects by instantaneous reassembly. High cytocompatibility, convenient functionalization by coassembly, and controlled enzymatic degradation but stability in 2D and 3D cell culture as demonstrated by the encapsulation of primary human umbilical vein endothelial cells and neuronal cells open many attractive opportunities for 3D tissue engineering and other biomedical applications.     

Elaboration and characterization of a refractory based on Algerian kaolin

A refractory material was elaborated from kaolin extracted from the region of Djebel Debbagh (Algeria). Kaolin grog was obtained by calcination at a temperature of 1350 °C during 1 h. It was used as aggregates with granulometric distribution composed of fine fraction (mean grain size: 100–250 μm) and coarse fraction (mean grain size: 1000–2500 μm). Crude kaolin (size < 75 μm) was also used as a binder with an amount representing 15% of the dry material. After a 9.28% moistening and a rotting of 1 day, cylindrical samples were shaped by uniaxial pressure at 80 MPa. The samples were submitted to a natural drying during 24 h, a stoving at 100 °C and a calcination at 600 °C during 1 h. They were fired at high temperatures between 1250 and 1450 °C.

An X-ray diffraction (XRD) analysis showed that the refractory samples are composed of mullite and silica. Silica is a mixture of a vitreous phase and cristobalite at 1300, 1350 and 1400 °C and becomes completely amorphous when the samples are fired at higher temperature (1450 °C). The sample porosity is about 30%. The mechanical tests carried out as a function of temperature revealed different behaviours of the material. From the ambient up to 600 °C, the refractory behaviour is pseudo-plastic caused by micro-cracking. Between 700 and 900 °C, the samples become more rigid. At 1000 °C, the material exhibits a visco-plastic behaviour. The amorphous phase governs the sample properties variation with temperature increasing. Its content varies between 28% and 34% according to the firing temperature. Thermal shock tests realized in water showed that the refractory samples present good thermal shock resistance.     

Fast electrostatic halftoning

Electrostatic halftoning is a high-quality method for stippling, dithering, and sampling, but it suffers from a high runtime. This made the technique difficult to use for most real-world applications. A recently proposed minimisation scheme based on the non-equispaced fast Fourier transform (NFFT) lowers the complexity in the particle number M from $\mathcal{O}(M^2)$ to $\mathcal{O}(M \log M).$ However, the NFFT is hard to parallelise, and the runtime on modern CPUs lies still in the orders of an hour for about 50,000 particles, to a day for 1 million particles. Our contributions to remedy this problem are threefold: we design the first GPU-based NFFT algorithm without special structural assumptions on the positions of nodes, we introduce a novel nearest-neighbour identification scheme for continuous point distributions, and we optimise the whole algorithm for n-body problems such as electrostatic halftoning. For 1 million particles, this new algorithm runs 50 times faster than the most efficient technique on the CPU, and even yields a speedup of 7,000 over the original algorithm.     

Synthesis of iron(II) complexes with asymmetric N<Subscript>2</Subscript>O<Subscript>2</Subscript> coordinating Schiff base-like ligands and their spin crossover properties

The synthesis of new Schiff base-like ligands with asymmetric substituents pattern and their iron complexes with pyridine as axial ligand is described. Two of the ligands and one of the iron(II) complexes were characterized by single crystal X-ray structure analysis. One of the the iron(II) complexes shows spin crossover behavior while the others remain in the high spin state. The influence of the reduced symmetry of the ligand on the properties of the complexes is discussed.

Open image in new window