基于主观评价的非织造布质量客观评价方法——QualiVlies

非织造布在世界范围内广泛生产.全球标准是非织造布生产的一个竞争因素.目前,非织造布在市场中的优势不仅是价格便宜,而且质量优良.因此,为了保持非织造布的市场,有必要提高非织造布质量.在线检测系统可检测破洞、薄区、厚区等疵点,但影响非织造布质量的不仅仅是疵点,还取决于其光学均匀性.尤其对于面密度较小(如15 g/m2)的非织造布,明显的不规则纤维分布会影响顾客的主观评价.阐述了一种代表主观评价的客观图像分析方法.     

Controlling electrical percolation in multicomponent carbon nanotube dispersions

Carbon nanotube reinforced polymeric composites can have favourable electrical properties, which make them useful for applications such as flat-panel displays and photovoltaic devices. However, using aqueous dispersions to fabricate composites with specific physical properties requires that the processing of the nanotube dispersion be understood and controlled while in the liquid phase. Here, using a combination of experiment and theory, we study the electrical percolation of carbon nanotubes introduced into a polymer matrix, and show that the percolation threshold can be substantially lowered by adding small quantities of a conductive polymer latex. Mixing colloidal particles of different sizes and shapes (in this case, spherical latex particles and rod-like nanotubes) introduces competing length scales that can strongly influence the formation of the system-spanning networks that are needed to produce electrically conductive composites. Interplay between the different species in the dispersions leads to synergetic or antagonistic percolation, depending on the ease of charge transport between the various conductive components.     

Molecular insights into human taste perception and umami tastants: A review

Understanding taste is key for optimizing the palatability of seaweeds and other non-animal-based foods rich in protein. The lingual papillae in the mouth hold taste buds with taste receptors for the five gustatory taste qualities. Each taste bud contains three distinct cell types, of which Type II cells carry various G protein-coupled receptors that can detect sweet, bitter, or umami tastants, while type III cells detect sour, and likely salty stimuli. Upon ligand binding, receptor-linked intracellular heterotrimeric G proteins initiate a cascade of downstream events which activate the afferent nerve fibers for taste perception in the brain. The taste of amino acids depends on the hydrophobicity, size, charge, isoelectric point, chirality of the alpha carbon, and the functional groups on their side chains. The principal umami ingredient monosodium l -glutamate, broadly known as MSG, loses umami taste upon acetylation, esterification, or methylation, but is able to form flat configurations that bind well to the umami taste receptor. Ribonucleotides such as guanosine monophosphate and inosine monophosphate strongly enhance umami taste when l -glutamate is present. Ribonucleotides bind to the outer section of the venus flytrap domain of the receptor dimer and stabilize the closed conformation. Concentrations of glutamate, aspartate, arginate, and other compounds in food products may enhance saltiness and overall flavor. Umami ingredients may help to reduce the consumption of salts and fats in the general population and increase food consumption in the elderly.     

Utilisation of continuous atomic layer deposition process for barrier enhancement of extrusion-coated paper

The feasibility of a novel continuous atomic layer deposition process in improving the barrier properties of extrusion-coated papers was investigated. The polymer coatings on paper were low-density polyethylene, polypropylene, polyethylene terephtalate and polylactide. The new method was tested by depositing 100 nm aluminium oxide layers on the polymer side of the structures. According to test results, the aluminium oxide layer produced significant barrier improvements. The water vapour and oxygen transmission rates measured were approximately 3-5 times lower than those of the untreated samples. Even better improvements were found for the water vapour transmission rates of polyethylene terephtalate and polylactide coated papers being over 10 times lower than for the untreated structures. It is proposed that the better water vapour barrier improvements were found because of these polymers' disposition to water sorption in the non-processed samples. The continuous atomic layer deposition process caused also considerable changes in the topography and morphology of some polymers, which reduced the barrier properties and applicability of the structures. Further research is needed to enable the use of lower process temperatures in the continuous atomic layer deposition process, which would improve the feasibility of the new method.     

Influence of High-Temperature Heat Treatment on Barrier and Functional Properties of Polyolefin-Coated Papers

In this study, the effect of heat treatment on barrier and functionality of polyolefin-coated papers was investigated. The aim was to find the optimal improvements on barrier without losing the applicability of the materials due to physical damages. The results of the study proved considerable improvement in barrier characteristics of the structures. Both water vapor and oxygen transmission rates of LDPE-coatings decreased linearly following the set-temperature until 200°C. At this point, the treatment caused a continuing decrease in oxygen transmission achieving 10 × lower transmission levels than the untreated structure, whereas moisture transport faced corresponding but lower increase. This was considered to be caused by the difference in diameter of the H₂O and O₂ molecules; the smaller water molecules are able to penetrate between spherulites, whose size increased due to higher treatment temperature followed by cooling.     

Effects of biomaterials for Lab-on-a-chip production on cell growth and expression of differentiated functions of leukemic cell lines

The rapid increase of the applications for Lab-on-a-chip devices has attracted the interest of researchers and engineers on standard process of the electronics industry for low production costs and large scale development, necessary for disposable applications. The printed circuit board technology could be used for this purpose, in particular for the wide range of materials available. In this paper, assays on biocompatibility of materials used for Lab-on-a-chip fabrication has been carried out using two tumor cell lines growing in suspension, the human chronic myelogenous leukemia K562 cell line, able to undergo erythroid differentiation when cultured with chemical inducers, and the lymphoblastoid cell line (LCL), extensively used for screening of cytotoxic T-lymphocytes (CTLs). We have demonstrated that some materials strongly inhibit cell proliferation of both the two cell lines to an extent higher that 70–75%, but only after a prolonged exposure of 3–6 days (Copper, Gold over Nickel, Aramid fiber filled epoxy uncured, b-stage epoxy die attach film, Tesa 4985 adhesive tape, Pyralux uncured, Copper + 1-octodecanethiol). However, when experiments were performed with short incubation time (1 h), only Aramid fiber filled epoxy uncured was cytotoxic. Variation of the results concerning the other materials was appreciable when the experiments performed on two cell lines were compared together. Furthermore, the effects of the materials on erythroid differentiation and CTL-mediated LCL lysis confirmed, in most of the cases, the data obtained in cytotoxic and antiproliferative tests.     

Bemessungsrelevante Kennwerte von Feinbeton für einaxiale Druckbeanspruchung

Design Parameters of Fine Grained Concrete for Uniaxial Compressive Loading Textile reinforced concrete (TRC) allows the design of thin‐structured concrete elements with a high load‐bearing capacity. The mechanical properties and stress‐strain relations under shortterm compressive loading of so called fine grained binder systems which are used as matrix are presented in this paper. The application of known mathematical formulations (e. g. simplified parabola‐rectangle stress‐strain curves for dimensioning purposes, prediction models for characteristic creep parameters) is investigated and design values of fine grained concrete are proposed.     

Identifying contemporary and historic sources of soil polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans in an industrial urban setting

A study of soil polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/F) concentrations was undertaken in the vicinity of a municipal solid waste incinerator (MSWI) in Newcastle upon Tyne as a result of concerns raised by local residents about potential contamination from fugitive and stack emissions. The study area was divided into four sectors (north-east (NE), south-east (SE), north-west (NW) and south-west (SW)) around the MSWI, and sampling sites were located up to a distance of 2.25 km. Based on air dispersion modelling, the sampling density was four times greater in the NE (downwind) sector compared to the SW (upwind) direction, and twice as great in the NW and SE sectors. PCDD/F concentrations found in soil samples ranged from 6 to 1911 ng I-TEQ/kg DW with a median of 32 ng I-TEQ/kg DW. There was no evidence of elevated concentrations downwind of the MSWI compared to other directions, nor of any trend in concentration at increasing distance from the MSWI. We concluded, therefore, that the MSWI fugitive and stack emissions were not a major source of PCDD/F contamination. Analysis of PCDD/F homologue profiles showed that samples exhibiting furan-dominated and OCDD-dominated profiles and a profile characteristic of the MSWI ash occurred in distinct clusters. Those samples showing the furan-dominated profile had the largest PCDD/F concentrations measured as I-TEQ, followed by samples with the incinerator profile, the deposition profile, and the OCDD-dominated profile. We identified some contamination hotspots located in the SW and SE sampling sectors (upwind of the MSWI), and potential sources for these hotspots were sought by using historic land use data from maps of the locality dating back to 1856. We concluded that the cluster of very high concentrations of PCDD/F in soils showing the furan homologue profile were most likely to have resulted from the disposal of graphite electrode sludges from brine electrolysis carried out at a chemical works between the 1890s and the 1930s.