Effect of Substrate Bias on Microstructure and Properties of Tetrahedral Amorphous Carbon Films

The microstructure and properties of tetrahedral amorphous carbon (ta-C) films deposited by the filtered cathodic vacuum arc technology has been investigated by visible Raman spectroscopy, AFM and Nano-indentor. The Raman spectra have been fitted with a s     

B－ISDN中的拥塞控制技术

Ｂ－ＩＳＤＮ是现代电信网的发展方向，拥塞控制技术则是其中的一个重要问题。由于Ｂ－ＩＳＤＮ采用新的信息传递方式──ＡＴＭ，使传统的拥塞控制方法不再适用。本文依据ＩＴＵ－Ｔ有关建议的最新内容对Ｂ－ＩＳＤＮ拥塞控制的基本思想、工作机制以及其中的主要功能作了较为详细的分析讨论，并提出了一些Ｂ－ＩＳＤＮ拥塞控制技术中尚需进一步研究的问题。     

川东地区长兴组缝洞型储层的识别

本文针对四川东部地区上二叠统长兴组(P_2~2)缝洞型储层的低孔、低渗及非均质性等特点,分析了影响这类储层识别的主要因素,提出了利用现有的地球物理测井手段定性识别储层的指标和定量综合识别储层的方法,这可望提高测试成功率。     

激光微焊接质量的模糊识别技术研究

讨论了激光微焊点焊接质量的模糊识别的概念，数学模型及其应用方法，并介绍了系统的硬件组成。     

低能重离子及其碰撞产生的级联原子在生物材料中的直接作用范围

用Ｍｏｎｔｅ Ｃａｒｌｏ法模拟计算了３０ｋｅＶ和２００ｋｅＶ的Ｎ＾＋与１１０ｋｅＶ的Ｆｅ＾＋在模拟细胞中的射程分布和径迹结构，并将１１０ｋｅＶＦｅ＾＋模拟计算的结果与ＲＳＢ测量的结果相比较，发现计算与测量的结果吻合较好，离子的作用范围小于１μｍ。计算和实验的结果都说明能量相当低的重离子不大可能直接作用引起麦胚深层生物效应。     

光纤式机器人触觉传感器静态特性的实验研究

介绍了一种光纤式机器人触觉传感器，分析了这种传感器的静态特性，并通过理论分析和实验研究提出了一种消除干扰的方法。实验结果证明，传感器的最大绝对误差为０．０５３ｋｇ，相对误差为０．６２％。     

二烷基硫代磷酸铵的捕收性能

本文研究了二烷基硫代磷酸铵（ＲＯ）２ＰＳＯＮＨ４（Ｒ＝乙基、丁基、己基、烯丙烯）系列捕收剂对非硫化矿孔雀石、锡石、赤铁矿、白铅矿、方解石和菱锌矿的浮选性能，并就药剂结构与性能关系进行了分析讨论．     

Structure and damping properties of polydimethylsiloxane and polymethacrylate sequential interpenetrating polymer networks

By using the technology of the sequential interpenetrating polymer network, a series of novel damping materials based on a polydimethylsiloxane (PDMS)/polyacrylate (PAC) matrix with polymethacrylate (PMAC) were synthesized. They have a controllable broad transition peak spanning the temperature range of 150–220°C and the medial value of loss factor with maximum of 0.35–0.60. Dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), and atomic force microscopy (AFM) were applied to analyze and characterize the transition behavior and the microphase structure of the materials. It was found that the size and height of a transition peak at both the low‐ and the high‐temperature zones change as a function not only of the concentration of PMAC and PDMS but also of the kind of PMAC; simultaneously, the low‐ temperature behavior was also governed by the crystallization of PDMS. The content of the crosslinking agent exerts a significant influence on the configuration of the curves of the transition peaks. AFM shows a characteristic phase morphology of double‐phase continuity containing a transition layer and domain less than 1 μm, indicating that the interwoven multilayer networks are the key to incorporation of the immiscible components and form a broad damping functional region. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 545–551, 2002     

Quantum-mechanical reaction rate constants from centroid molecular dynamics simulations: Barrier crossing in an asymmetrical double-well

Quantum-mechanical reaction rate constants were calculated from centroid molecular dynamics (CMD) simulations, for the case of barrier crossing in an asymmetrical double-well potential bilinearly coupled to a harmonic bath. The calculation is based on a recently proposed formulation of the reaction rate constant in terms of the position—flux correlation function, which can be approximated via CMD in a well-defined manner. The predictions of CMD and various simplified versions of it are compared to exact results, which were obtained via the quasi-adiabatic propagator path integral (QUAPI) method, and/or path integral quantum transition state theory (PI-QTST). The predictions based on CMD are found to be in good agreement with both.