适用于高速长途DWDM系统的色散管理线路

对于高速长途密集波分复用（DWDM）传输，必需采用各种各样的色散补偿、色散管理技术，其中，交替使用正负色散光纤构成色散管理线路（DML）是可行的解决方案之一，在国际上已经取得显著进展，正成为人们关注的焦点，国内在这方面的研究报道还少见.文章以高速长途DWDM系统对传输线路的性能要求为基础，综述了有代表性的3种不同类型的DML的特点和最新进展。     

Model-based automated extraction of microtubules from electron tomography volume.

We propose a model-based automated approach to extracting microtubules from noisy electron tomography volume. Our approach consists of volume enhancement, microtubule localization, and boundary segmentation to exploit the unique geometric and photometric properties of microtubules. The enhancement starts with an anisotropic invariant wavelet transform to enhance the microtubules globally, followed by a three-dimensional (3-D) tube-enhancing filter based on Weingarten matrix to further accentuate the tubular structures locally. The enhancement ends with a modified coherence-enhancing diffusion to complete the interruptions along the microtubules. The microtubules are then localized with a centerline extraction algorithm adapted for tubular objects. To perform segmentation, we novelly modify and extend active shape model method. We first use 3-D local surface enhancement to characterize the microtubule boundary and improve shape searching by relating the boundary strength with the weight matrix of the searching error. We then integrate the active shape model with Kalman filtering to utilize the longitudinal smoothness along the microtubules. The segmentation improved in this way is robust against missing boundaries and outliers that are often present in the tomography volume. Experimental results demonstrate that our automated method produces results close to those by manual process and uses only a fraction of the time of the latter.     

Modular and rapid testing of SOCs with unwrapped logic blocks

Extensive research has been carried out for test planning of core-based system-on-a-chip devices. Most of the prior work assumes that all of the embedded cores are wrapped for test purpose. However, some designs may contain user-defined logic or cores that cannot be wrapped due to area constraints or timing violations. This paper discusses how these unwrapped logic blocks can be tested rapidly by adapting the TestRail architecture, which uses only the test control mechanism and the test instructions available through the IEEE 1500 standard for embedded core test. A new test scheduling algorithm, which facilitates a concurrent test of both unwrapped logic blocks and IEEE 1500-wrapped cores, is proposed, and experiments show that it outperforms a previous approach when the available number of tester channels and/or the number of unwrapped logic blocks are small.     

p型碲镉汞液相外延材料Ag掺杂的研究

利用SIMS和变温霍尔测量手段对P型Hg0.77Gd0.23Te液相外延材料的Ag掺杂技术、机理及掺杂碲镉汞材料的性能进行了研究。结果表明采用AgNO3溶液直接浸泡方式对该材料进行掺Ag是成功的，掺杂浓度与被掺杂材料中的汞空位浓度是一致的，掺杂后，P型碲镉汞材料的受主能级比掺杂前有明显的减小，从实验结果可看到掺Ag碲镉汞材料的电学性能在室温下保持稳定。     

线路故障位置对暂态稳定性的异常影响及其机理

发现稳定裕度除了随线路上的故障位置单调增加、单调减小、凸状变化外，还可能呈现凹状分布的形态。通过扩展等面积准则（EEAC）理论揭示其机理，以解析方式得到稳定裕度随故障位置凹状变化的条件，并在多机系统的仿真中验证了稳定裕度随故障位置的异常变化形式。该现象的发现和剖析不但有利于深入理解电力系统暂态稳定性的物理本质，也对工程分析提出了新的注意点。     

进口VPSA制氧装置的流程特点及配置

详细介绍了进口的VPSA制氧装置的流程特点、工艺参数及主要设备的配置。实际运转证明 ,该制氧装置具有运行可靠、启动时间短、部分负荷性能优越、负荷转换速度快等优点 ,能满足金隆铜业有限公司的实际生产要求。     

竖直狭缝通道中液氮沸腾强化换热的实验研究

实验表明，狭缝间隙对液氮自然对流核态沸腾换热有明显的影响，在低热流密度下，间隙小的狭缝沸腾换热比间隙大的狭缝明显增强，当狭缝间隙小于实验压力下气泡的脱离直径时，对于同样的热流密度，传热温差减小一个数量级以上，沸腾换热系数提高十几倍到二十倍以上，当热流密度增加一定程度（＞4W/cm^2)时，间隙小的狭缝沸腾换热比间隙大的狭缝有所减弱。     

微波法制取二氧化锡粉体材料

以SnCl_2·2H_2O为主要原料,用微波加热法制备SnO_2粉体。用粒度仪对制备的粉体进行了表征。结果表明:微波加热可使原料反应生成粉体颗粒,其反应物浓度、pH值、微波加热功率及反应时间都对粒径产生影响。在反应功率为400W;pH值为2～3;反应时间为20min;反应浓度为0.35×10~(-2)mol/L时,可以制备出SnO_2粉体。