Numerical modelling in wave energy conversion systems

This paper deals with a numerical modelling devoted to predict the flow characteristics in the components of an oscillating water column (OWC) system used for the wave energy capture. In the present paper, the flow behaviour is modelled by using the FLUENT code. Two numerical flow models have been elaborated and tested independently in the geometries of an air chamber and a turbine, which is chosen of a radial impulse type. The flow is assumed to be three-dimensional (3D), viscous, turbulent and unsteady. The FLUENT code is used with a solver of the coupled conservation equations of mass, momentum and energy, with an implicit time scheme and with the adoption of the dynamic mesh and the sliding mesh techniques in areas of moving surfaces. Turbulence is modelled with the k–ε model. The obtained results indicate that the developed models are well suitable to analyse the air flows both in the air chamber and in the turbine. The performances associated with the energy transfer processes have been well predicted. For the turbine, the numerical results of pressure and torque were compared to the experimental ones. Good agreements between these results have been observed.     

Optical Nanoscale Pool‐on‐Surface Design for Control Sensing Recognition of Multiple Cations

General design of optical chemical nanosensors is needed to develop efficient sensing systems with high flexibility, and low capital cost for control recognition of toxic analytes. Here, we designed optical chemical nanosensors for simple, high‐speed detection of multiple toxic metal ions. The systematic design of the nanosensors was based on densely patterned chromophores with intrinsic mobility, namely, “building‐blocks” onto three‐dimensional (3D) nanoscale structures. The ability to precisely modify the nanoscale pore surfaces by using a broad range of chromophores that have different molecular sizes and characteristics enables detection of multiple toxic ions. A key feature of this building‐blocks design strategy is that the surface functionality and good adsorption characteristics of the fabricated nanosensor arrays enabled the development of “pool‐on‐surface” sensing systems in which high flux of the metal analytes across the probe molecules was achieved without significant kinetic hindrance. Such a sensing design enabled sensitive recognition of metal ions up to sub‐picomolar detection limits (～10^?11 mol dm^?3), for first time, with rapid response time within few seconds. Moreover, because these sensing pools exhibited long‐term stability, reversibility and selectivity in detecting most pollutant cations, for example, Cr(VI), Pb(II), Co(II), and Pd(II) ions, they are practical and inexpensive. The key result in our study is that the pool‐on‐surface design for optical nanosensors exhibited significant ion‐selective ability of these target ions from environmental samples and waste disposals.     

Iterative interference cancellation for high spectral efficiencysatellite communications

The problem of efficient utilization of the frequency spectrum for satellite systems is investigated; one which results as a consequence of highly crowding adjacent channels. An analytical characterization of the resulting interference channel is introduced and then exploited for interference cancellation. Two classes of cancelers are investigated. The first approach does not benefit from the forward error control (FEC) coding information which limits the performance gain. This motivates the second approach where a joint implementation of interference cancellation and decoding is developed using soft-input-soft-output (SISO) modules along with the iterative structure. It is shown that iterative interference cancellation techniques can achieve significant gains compared with the single-user matched filter receiver     

Analysis and simulation of interrupt overhead impact on OS throughput in high‐speed networks

The paper presents analytical and simulation models to study the impact of interrupt overhead on operating system throughput of network elements such as PC‐based routers, servers, and hosts when subjected to high‐speed network traffic. Under such high network traffic, the system throughput will be negatively affected due to interrupt overhead caused by the incoming traffic. We first present an analytical model for the ideal system when interrupt overhead is ignored. We then present two models which describe the impact of high interrupt rate on system throughput. One model is for employing PIO in which network adapters are not equipped with DMA engines, and the other model is for employing DMA in which network adapters are equipped with DMA engines. The paper also describes detailed discrete‐event simulation models for the ideal system and for systems with DMA and PIO. Simulations results as well as reported experimental measurements show that our analytical models are valid and give a good approximation. Our analysis and simulation work can be valuable in providing insight to understand and predict system behaviour, as well as improving and maintaining good host performance. The paper identifies analytically critical design operation points such as that of overload condition. The paper also proposes solutions and recommendations for improving performance. Copyright © 2005 John Wiley & Sons, Ltd.     

The Effects of Embedded Dipoles in Aromatic Self‐Assembled Monolayers

Using a representative model system, here electronic and structural properties of aromatic self‐assembled monolayers (SAMs) are described that contain an embedded, dipolar group. As polar unit, pyrimidine is used, with its orientation in the molecular backbone and, consequently, the direction of the embedded dipole moment being varied. The electronic and structural properties of these embedded‐dipole SAMs are thoroughly analyzed using a number of complementary characterization techniques combined with quantum‐mechanical modeling. It is shown that such mid‐chain‐substituted monolayers are highly interesting from both fundamental and application viewpoints, as the dipolar groups are found to induce a potential discontinuity inside the monolayer, electrostatically shifting the core‐level energies in the regions above and below the dipoles relative to one another. These SAMs also allow for tuning the substrate work function in a controlled manner independent of the docking chemistry and, most importantly, without modifying the SAM‐ambient interface.     

Java multimedia telecollaboration

Using Java-based tools in multimedia collaborative environments accessed over the Internet can increase an application's client base. Most operating systems support Java, and its "compile once-run everywhere" architecture is easy to maintain and update. The Java-based tools presented here let users share Internet resources, including resources originally designed for single use.     

Software‐defined networking approach for enhanced evolved packet core network

The evolved packet core (EPC) network is the mobile network standardized by the 3rd Generation Partnership Project and represents the recent evolution of mobile networks providing high‐speed data rates and on‐demand connectivity services. Software‐defined networking (SDN) is recently gaining momentum in network research as a new generation networking technique. An SDN‐based EPC is expected to introduce gains to the EPC control plane architecture in terms of simplified, and perhaps even software‐based, vendor independent infrastructure nodes. In this paper, we propose a novel SDN‐based EPC architecture along with the protocol‐level detailed implementation and provide a mechanism for identifying information fields exchanged between SDN‐EPC entities that maintains correct functionality with minimal impact on the conventional design. Furthermore, we present the first comprehensive network performance evaluation for the SDN‐based EPC versus the conventional EPC and provide a comparative analysis of 2 networks performances identifying potential bottlenecks and performance issues. The evaluation focuses on 2 network control operations, namely, the S1‐handover and registration operations, taking into account several factors, and assessing performance metrics such as end‐to‐end delay (E2ED) for completion of the respective control operation, and EPC nodes utilization figures.     

在RGB显示器中生成一致的LED亮度

发光二极管（LED）在各种终端设备中已经被广泛使用，从汽车前照灯、交通信号灯、文字显示器、广告牌及大屏幕视频显示器，到普通及建筑照明和LCD背光等最新应用，LED的迅速采用使得最普通的设备也需要重新设计。随着LED效率与亮度的增加以及成本的减少，LED有可能会取代消费类应用中的传统照明技术。本文通过比较采用基于LED的LCD背光的大屏幕显示器中所使用的一些技术，阐述如何解决在使用LED时所面对的一些设计挑战。     

A Survey on IP Watermarking Techniques

Intellectual property (IP) block reuse is essential for facilitating the design process of system-on-a-chip. Sharing IP designs poses significant high security risks. Recently, digital watermarking emerged as a candidate solution for copyright protection of IP blocks. In this paper, we survey and classify different techniques used for watermarking IP designs. To this end, we defined several evaluation criteria, which can also be used as a benchmark for new IP watermarking developments. Furthermore, we established a comprehensive set of requirements for future IP watermarking techniques.     

Petrographic and petrophysical characterization of some Paleozoic rocks,Um Bogma area,Southwest Sinai,Egypt

Sixty-two samples were collected from the five formations at Um Bogma area, (Southwest Sinai, Egypt). Nine samples were collected from Sarabit El Khedim Formation, ten samples were collected from Abu Hamata Formation, eighteen samples were collected from Adedia Formation, eight samples were collected from Um Bogma Formation and eighteen samples were collected from Abu Thora Formation.The Paleozoic rocks at Um Bogma area, consist mainly of sandstones, siltstones, shales, limestone and dolostones, which are unconformably overlie igneous and metamorphic rocks (granite, diorite and gneiss) of Precambrian age.The petrographic studies were applied to identify different rock units, different facies and its diagenetic history and to reveal its effect on the storage capacity properties. Different types of porosity (oversized, intergranular, fracture and vuggy porosities) have been identified based on the petrographic investigation of the studied thin sections.The Paleozoic sandstone rock samples are characterized by porosity average about 19% for Facies 1 (quartz wack) and about 18%for Facies 2 (quartz arenite) and permeability average 420?mD for Facies 1 (quartz wack) and 690?mD for Facies 2 (quartz arenite), so these rocks can be considered as good reservoir rocks. The Paleozoic carbonate rock samples (Facies 3) are characterized by poor porosity (less than 7%) and very low permeability (less than 0.5?mD), which caused by matrix and diagenetic processes and refer to bad reservoir rocks.Porosity can be linked to the two derived electrical properties (formation resistivity factor and electrical tortuosity) of the studied Paleozoic rocks at Um Bogma area. The electrical tortuosity has significant effects on both permeability and formation resistivity factor. The permeability decreases with increasing electrical tortuosity and the relation between both of them is inverse relationship with good coefficient of correlation. The permeability decreases with increasing electrical tortuosity and the relations between both of them are inverse relationships with high coefficient of correlation. The formation resistivity factor increases with increasing electrical tortuosity and the relations between both of them are positive relationships with a fair to very high coefficient of correlation.