A dielectric study of the crystal and amorphous fractions in oriented polyethylenes

Polyethylenes have relaxation processes separately assignable to the crystal and amorphous components. The possibility thus presents itself for studying the interaction between the two phases by investigating the anisotropy of the separate relaxation processes induced by overall orientation of the material. Such a study was carried out here by the dielectric method on samples rendered dielectrically active by the introduction of a few carbonyl groups by oxidation. In addition to the usual advantage of ease of frequency variation, the dielectric method in this case has a very great advantage in interpretation resulting from the similarity of dielectric constants of the two phases. In specimens oriented by solid-state extrusion, it was found that the crystalline relaxation process (α) develops the expected anisotropy resulting from dipoles normal to C-axis alignment in the extrusion direction. In branched polyethylene (BPE) no accompanying anisotropy of the amorphous β and γ processes was observed. Since the extrusion was carried out well above the glass temperature of the amorphous component, this indicates that constraints from the crystal phase are not sufficient to prevent dissipation of amorphous orientation by segmental motion. However in linear polyethylene (LPE) (where there is no well-developed β process) some anisotropy of the γ process was observed. It is proposed that a higher degree of constraint of the amorphous component by the crystals in LPE results in suppression of the glass-rubber (β) relaxation and permits amorphous orientation to accompany crystal orientation.     

Severe jaw enlargement associated with uremic hyperparathyroidism

Marked enlargement of the jaws is a rare complication of renal osteodystrophy. This report describes a localized enlargement of the mandible due to a brown tumor in a patient undergoing chronic hemodialysis. Literature on jaw involvement in secondary hyperparathyroidism is reviewed.     

Using immersive virtual reality and anatomically correct computer-generated characters in the forensic assessment of deviant sexual preferences

Penile plethysmography (PPG) is the gold standard for the assessment of sexual interests, especially among sex offenders of children. Nonetheless, this method faces some ethical limitations inherent to the nature of its stimuli and could benefit from the improvement of its ecological validity. The use of computer-generated characters (CGC) in virtual immersion for PPG assessment might help address these issues. A new application developed to design made-to-measure anatomically correct virtual characters compatible with the Tanner developmental stages is presented. The main purpose of this study was to determine how the virtual reality (VR) modality compares to the standard auditory modality on their capacity to generate sexual arousal profiles and deviance differentials indicative of sexual interests. The erectile responses of 22 sex offenders of children and 42 non-deviant adult males were recorded. While both stimulus modalities generated significantly different genital arousal profiles for sex offenders of children and non-deviant males, deviance differentials calculated from the VR modality allowed for significantly higher classification accuracy. Performing receiver operating characteristic analyses further assessed discriminant potential. Auditory modality yielded an area under the curve (AUC) of 0.79 (SE = 0.059) while CGC in VR yielded an AUC of 0.90 (SE = 0.052). Overall, results suggest that the VR modality allows significantly better group classification accuracy and discriminant validity than audio stimuli, which provide empirical support for the use of this new method for PPG assessment. Additionally, the potential use of VR in interventions pertaining to self-regulation of sexual offending is addressed in conclusion.     

Self-calibration of stationary non-rotating zooming cameras

This paper proposes a new method for self-calibrating a set of stationary non-rotating zooming cameras. This is a realistic configuration, usually encountered in surveillance systems, in which each zooming camera is physically attached to a static structure (wall, ceiling, robot, or tripod). In particular, a linear, yet effective method to recover the affine structure of the observed scene from two or more such stationary zooming cameras is presented. The proposed method solely relies on point correspondences across images and no knowledge about the scene is required. Our method exploits the mostly translational displacement of the so-called principal plane of each zooming camera to estimate the location of the plane at infinity. The principal plane of a camera, at any given setting of its zoom, is encoded in its corresponding perspective projection matrix from which it can be easily extracted. As a displacement of the principal plane of a camera under the effect of zooming allows the identification of a pair of parallel planes, each zooming camera can be used to locate a line on the plane at infinity. Hence, two or more such zooming cameras in general positions allow the obtainment of an estimate of the plane at infinity making it possible, under the assumption of zero-skew and/or known aspect ratio, to linearly calculate the camera's parameters. Finally, the parameters of the camera and the coordinates of the plane at infinity are refined through a nonlinear least-squares optimization procedure. The results of our extensive experiments using both simulated and real data are also reported in this paper.     

Service Oriented Approach State of the Art

For many years, computer systems have emerged; they now occupy an important place in our daily lives. The growing needs and ever increasing use of computer systems have made application development more and more complicated, The complexity of these applications poses problems such as reuse, installation, administration and evolution of applications. The development of applications is related to the evolution of paradigms and approaches to developing them. This paper presents different approaches and paradigms of development starting with the procedural approach, coming up for service, through the component and object-oriented approaches. Also, for each of the approaches we determine the advantages and limitations.     

Visual Recommendations for Network Navigation

Understanding large, complex networks is important for many critical tasks, including decision making, process optimization, and threat detection. Existing network analysis tools often lack intuitive interfaces to support the exploration of large scale data. We present a visual recommendation system to help guide users during navigation of network data. Collaborative filtering, similarity metrics, and relative importance are used to generate recommendations of potentially significant nodes for users to explore. In addition, graph layout and node visibility are adjusted in real‐time to accommodate recommendation display and to reduce visual clutter. Case studies are presented to show how our design can improve network exploration.     

The effects of phosphorus additions on the sedimentation of contaminants in a uranium mine pit-lake

We investigated the usefulness of phytoplankton for the removal of surface water contaminants. Nine large mesocosms (92.2m(3)) were suspended in the flooded DJX uranium pit at Cluff Lake (Saskatchewan, Canada), and filled with highly contaminated mine water. Each mesocosm was fertilized with a different amount of phosphorus throughout the 35 day experiment to stimulate phytoplankton growth, and to create a range in phosphorus load (g) to examine how contaminants may be affected by different nutrient regimes. Algal growth was rapid in fertilized mesocosms (as demonstrated by chlorophyll a profiles). As phosphorus loads increased there were significant declines (p<0.05) in the surface water concentrations of As, Co, Cu, Mn, Ni, and Zn. This decline was near significant for uranium (p=0.065). The surface water concentrations of Ra-226, Mo, and Se showed no relationship to phosphorus load. Contaminant concentrations in sediment traps suspended at the bottom of each mesocosm generally showed the opposite trend to that observed in the surface water, with most contaminants (As, Co, Cu, Mn, Ni, Ra-226, U, and Zn) exhibiting a significant positive relationship (p<0.05) with phosphorus load. Selenium and Mo did not respond to nutrient treatments. Our results suggest that phytoremediation has the potential to lower many surface water contaminants through the sedimentation of phytoplankton. Based on our results, we estimate that the Saskatchewan Surface Water Quality Objectives (SSWQO) for DJX pit would be met in approximately 45 weeks for Co, 65 weeks for Ni, 15 weeks for U, and 5 weeks for Zn.