Correlation of analyte structures with biosensor responses using the detection of phenolic estrogens as a model

The apparent increase in hormone-induced cancers and disorders of the reproductive tract in wildlife and humans has led to a search for an accurate and reliable method for monitoring endocrine-disrupting chemicals (EDCs). This study presents a generic approach that may allow researchers to establish screening procedures for potential EDCs by correlating the analyte structures with biosensor responses and explain possible reaction mechanisms. A simple amperometric tyrosinase-based biosensor (Tyr-CPE) has been developed for the detection of phenolic EDCs. The investigation of the enzymatic oxidation of selected phenolic estrogens was first carried out using UV-vis spectroscopy. The result was used to correlate sensor responses to enzymatic activity. Natural phytoestrogen polyphenols, including resveratrol (RES), genistein (GEN), and quercetin (QRC), were compared with synthetic estrogens, for example, bisphenol A (BPhA), nonylphenol (NPh), and diethylstilbestrol (DES). The Tyr-CPE biosensor resulted in rapid, simple, and accurate measurement of phenolic estrogens with varying degrees of sensitivity, selectivity, and response times. The sensor responses have been evaluated for the detection of binary and tertiary mixtures of EDCs and natural estrogens. The results showed that BPhA could be successfully discriminated in a composite mixture containing NPh and DES at various ratios. In the case of natural phenolic estrogens GEN, RES, and QRC, the sensor allows the determination of a total phenolic content. The sensor was also validated for the detection of BPhA in a real environmental water sample, and the results was compared with standard ASTM method 9065. Mechanistically, our results indicated that the number of OH groups, the nature and the position of aryl ring substituents, or both could affect the detection limit and the biosensor sensitivity.     

Highly conductive polymer materials based multi-walled carbon nanotubes as counter electrodes for dye-sensitized solar cells

Poly(3,4-ethylenedioxxythiophene) (PEDOT), polyaniline (PANI) and polythiophene (PTh) based multi-walled carbon nanotube (MWCNT) composites were successfully prepared using RF-rotating plasma grafting method. Morphological characterizations of composites were determined using scanning electron microscopy (SEM), which showed that conducting polymers (CPs) of PEDOT, PANI and PTh were coated on the surface of CNTs. The surface properties of the Carbon Nanotube (CNT) composites were also determined by using Infrared Spectra (FT-IR), X-ray Photon Spectra (XPS), and Scanning Electron Microscopy-Energy Dispersive X-ray Spectra (SEM-EDX) analysis. X-ray photon spectra results confirmed the formation of the composites. Composites of MWCNT were used in dye-sensitized solar cells (DSSCs) as counter electrodes and exhibited short-circuit photocurrent densities of 11.19, 10.70 and 8.54 mA/cm² for PANI/MWCNT, PTh/MWCNT and PEDOT/CNT, respectively.     

Molecular Characterization of a Lysophosphatidylcholine Acyltransferase Gene Belonging to the MBOAT Family in Ricinus communis L.

Acyl-CoA:lysophosphatidylcholine acyltransferase (LPCAT, EC 2.3.1.23) catalyzes acylation of lysophosphatidylcholine (lysoPtdCho) to produce phosphatidylcholine (PtdCho), the main phospholipid in cellular membranes. This reaction is a key component of the acyl-editing process, involving recycling of the fatty acids (FA) mainly at the sn-2 position of PtdCho. Growing evidences indicate that the LPCAT reaction controls the direct entry of newly synthesized FA into PtdCho and, at least in some plant species, it has an important impact on the synthesis and composition of triacylglycerols. Here we describe the molecular characterization of the single LPCAT gene found in the genome of Ricinus communis (RcLPCAT) that is homologous to LPCAT genes of the MBOAT family previously described in Arabidopsis and Brassica. RcLPCAT is ubiquitously expressed in all organs of the castor plant. Biochemical properties have been studied by heterologous expression of RcLPCAT in the ale1 yeast mutant, defective in lysophospholipid acyltransferase activity. RcLPCAT preferentially acylates lysoPtdCho against other lysophospholipids (lysoPL) and does not discriminates the acyl chain in the acceptor, displaying a strong activity with alkyl lysoPL. Regarding the acyl-CoA donor, RcLPCAT uses monounsaturated fatty acid thioesters, such as oleoyl-CoA (18:1-CoA), as preferred donors, while it has a low activity with saturated fatty acids and shows a poor utilization of ricinoleoyl-CoA (18:1-OH-CoA). These characteristics are discussed in terms of a possible role of RcLPCAT in regulating the entry of FA into PtdCho and the exclusion from the membranes of the hydroxylated FA.     

A Bound for the Order of Characteristic Set Elements of an Ordinary Prime Differential Ideal and some Applications

With respect to an elimination ordering, we give an upper bound for the order of characteristic set elements of an ordinary prime differential ideal. Using some results of complexity in the algebraic case, we show that computing characteristic sets of ordinary prime differential ideals, by change of ordering, is single exponential time. Received: January 8, 1997; revised version: May 6, 1999     

A distributed activity scheduling algorithm for wireless sensor networks with partial coverage

One of the most important design objectives in wireless sensor networks (WSN) is minimizing the energy consumption since these networks are expected to operate in harsh conditions where the recharging of batteries is impractical, if not impossible. The sleep scheduling mechanism allows sensors to sleep intermittently in order to reduce energy consumption and extend network lifetime. In applications where 100% coverage of the network field is not crucial, allowing the coverage to drop below full coverage while keeping above a predetermined threshold, i.e., partial coverage, can further increase the network lifetime. In this paper, we develop the distributed adaptive sleep scheduling algorithm (DASSA) for WSNs with partial coverage. DASSA does not require location information of sensors while maintaining connectivity and satisfying a user defined coverage target. In DASSA, nodes use the residual energy levels and feedback from the sink for scheduling the activity of their neighbors. This feedback mechanism reduces the randomness in scheduling that would otherwise occur due to the absence of location information. The performance of DASSA is compared with an integer linear programming (ILP) based centralized sleep scheduling algorithm (CSSA), which is devised to find the maximum number of rounds the network can survive assuming that the location information of all sensors is available. DASSA is also compared with the decentralized DGT algorithm. DASSA attains network lifetimes up to 92% of the centralized solution and it achieves significantly longer lifetimes compared with the DGT algorithm.     

Teacher beliefs and technology integration practices: A critical relationship

Early studies indicated that teachers’ enacted beliefs, particularly in terms of classroom technology practices, often did not align with their espoused beliefs. Researchers concluded this was due, at least in part, to a variety of external barriers that prevented teachers from using technology in ways that aligned more closely with their beliefs. However, many of these barriers (access, support, etc.) have since been eliminated in the majority of schools. This multiple case-study research was designed to revisit the question, “How do the pedagogical beliefs and classroom technology practices of teachers, recognized for their technology uses, align?”     

Mesoscopic nonequilibrium thermodynamics treatment of the grain boundary thermal grooving induced by the anisotropic surface drift diffusion

A systematic study based on the self-consistent dynamical simulations is presented for the grain boundary thermal grooving problem by strictly following the irreversible thermodynamic theory of surfaces and interfaces with singularities [T. O. Ogurtani, J. Chem. Phys. 124, 144706 (2006)]. This approach furnishes us to have auto-control on the otherwise free-motion of the grain boundary triple junction without presuming any equilibrium dihedral (wetting) angles at the edges. The effects of physicochemical properties and the anisotropic surface diffusivity on the transient grooving behavior, which takes place at the early stage of the scenario, were considered. We analyzed the experimental thermal grooving data reported for tungsten in the literature, and compared them with the carried simulation results. This investigation showed that the observed changes in the dihedral angles are strictly connected to the transient behavior of the simulated global system, and manifest themselves at the early stage of the thermal grooving phenomenon.     

Theatre in the Sky: a ubiquitous broadband multimedia‐on‐demand service over a novel constellation composed of quasi‐geostationary satellites

To meet an ever‐growing demand for wideband multimedia services and electronic connectivity across the world, development of ubiquitous broadband multimedia systems is gaining a tremendous interest at both commercial and academic levels. Satellite networks will play an indispensable role in the deployment of such systems. A significant number of satellite communication constellations have been thus proposed using Geostationary (GEO), Medium Earth Orbit (MEO), or Low Earth Orbit (LEO) satellites. These constellations, however, either require a potential number of satellites or are unable to provide data transmission with high elevation angles. This paper proposes a new satellite constellation composed of Quasi‐GeoStationary Orbit (Quasi‐GSO) satellites. The main advantage of the constellation is in its ability to provide global coverage with a significantly small number of satellites while, at the same time, maintaining high elevation angles. Based on a combination of this Quasi‐GSO satellites constellation and terrestrial networks, the paper proposes also an architecture for building a global, large‐scale, and efficient Video‐on‐Demand (VoD) system. The entire architecture is referred to as a ‘Theatre in the Sky’. Copyright © 2006 John Wiley & Sons, Ltd.     

A colloidal method for manganese oxide addition to alumina powder and investigation of properties

Various methods can be applied to introduce additives to ceramic materials. Of these methods, mechanical mixing may not always be suitable to obtain a uniform distribution of the small quantities of additive within the structure, requiring colloidal methods to be applied for the purpose. The addition of manganese oxide to alumina powder has been studied using a colloidal method. The effect of the manganese addition on alumina microstructure and the later stages of the densification behaviour was investigated, together with the hardness and mechanical strength. No evidence of secondary phase formation was detected between the manganese cation and alumina powder for up to 0.5wt% manganese addition, suggesting that manganese is in solid solution with alumina. The microstructural evidence presented suggests that small quantities of a manganese addition to alumina enhance the densification process through the formation of fast diffusion paths within the crystalline structure, similar to the effect of TiO₂ addition.