Partner Selection Technique for Wireless Cooperative Communication

In wireless cooperative communication scheme, transmit diversity is achieved by coupling the distributed users. In this paper, a new partner selection algorithm is proposed. The selection scheme utilizes the basic work done by Almawgani on RS coded cooperation for wireless network. Users are classified into weak and strong ones based on the signal-to-Noise Ratio (SNR) uplink matrix. Users with good uplink channel SNR (strong users) are coupled with those experiencing weak uplink channel conditions (weak users). The proposed algorithm offers an improvement to the outage probability, \(P_{out}\) and power efficiency as compared to the established work. The algorithm shows a significant improvement of \(P_{out}\) at lower values of uplink SNR.     

Tuning of ultraviolet-curable ink printability via in situ ultraviolet irradiation during direct ink write applications

Direct ink write deposition facilitates line-by-line extrusion of inks spanning wide viscoelastic ranges. Following deposition, post processing technologies permit tuning of the extrudate's material property characteristics—ultraviolet (UV) irradiation, facilitating the photopolymerization of UV-reactive catalyst solutions, permits targeted modification of the extrudate's microstructure and in situ tuning of extrudate macrostructure. This report analyzes the morphological, rheological, and microstructural property relationships governing the printability, and processivity, of extruded UV-curable resin inks for delineation of sufficiency and optimization of ink printability utilizing direct ink write technologies. A design-of-experiments approach is implemented to quantify significance regarding an extrudate's dimensional response to extrusion parameter variation and in situ processing parameters, identifying proportionally of nozzle velocity, nozzle height, and UV irradiation exposure with extrudate aspect ratio, reflected by respective maximum extrudate aspect ratio increases of 158% and 109%, regarding 121 and 123K resin inks. Finally, the relationship between extrudate morphology and microstructure variation was assessed via dielectric cure monitoring, whereby an extrudate's ion viscosity was calculated in relation to its rheological modulus, reflecting the relationship between an extrudate's morphology, rheological response, and printability, regarding its microstructural variation.     

Analyse et modélisation de la permittivité effective statique de la ligne microruban suspendue

New numerical quasi-static model for the computer aided design (CAD) and analysis of suspended microstrip lines is reported. This model is applicable up to ε_r = 20 and over the range 0.001 ≤ u ≤ 1000, where u = w/h ₁ is the structure’s variable (w is the width of the strip and h ₁ is the air gap’s thickness). The practical cases are limited to a thickness h ₁ of the same order of h ₂ which is the dielectric’s thickness. This yields to choose 0.5 ≤ m ≤ 1.5. The parameter m is dependent on the structure’s variable u. This model is conceived to corroborate the results of the variational approach in any point of its ranges of validity, with a raised error with 1.2%. Although the variational approach allows accurate values of the effective permittivity, but the computing time is relatively high which quickly becomes prohibitory if the Finished Coupled Elementary Lines method is used. The present model is an improvement over the previous variational method as it not only takes lower computing time but it also valid up to high values of ε_r and over the range 0.001 ≤ u ≤ 1000. This work is important by the fact that it seeks to visualise the formal model of the effective permittivity, generally masked in a direct variational treatment.     

Hybridation des méthodes de recherche taboue et du recuit simulé pour l’optimisation d’une antenne en réseau adaptative

The increasing pollution of the electromagnetic environment has prompted the study of array pattern nulling techniques. These techniques are very important in radar, sonar and communication systems for minimising degradation in signal-to-noise ratio performance due to undesired interferences. Adaptive array antennas backed by strong signal processing algorithms are able to automatically change the beam pattern in accordance with the changing signal environment. It not only directs maximum radiation in the direction of the desired mobile user but also introduces nulls for interfering directions while tracking the desired mobile user at the same time. The adaptation is achieved by multiplying the incoming signals with complex weights and then summing them together to obtain the desired radiation pattern. Adaptive array optimization is an NP-hardproblem. In this paper, a technique based on the coupling between tabu search and simulated annealing methods is presented to solve this problem. Several illustrative examples of patterns with imposed single and multiple null directions are given to show the versatility of the present method.     

Numerical and experimental analysis of unsteady heat transfer with periodic variation of inlet temperature in circular ducts

This work focusses on a numerical and experimental analysis of unsteady forced convection in hydrodynamically developed and thermally developing laminar air flow in a circular duct, subjected to a periodic variation of the inlet temperature. The experiments were conducted over a wide range of Reynolds number (281.2 ≤ Re ≤ 1024.3) and inlet frequency (0.01 ≤ β ≤ 0.20 Hz) of the periodic heat input. In the numerical study, the non-uniform inlet temperature amplitude profile derived from the experiments, was included in the numerical model. A fully explicit, second-order accurate finite difference scheme was developed and used for the solution of the unsteady energy equation. Numerical results are obtained with the fully developed parabolic velocity profile under the boundary condition of the first kind, which was verified by the experiments. Temperature variations along the centerline of the circular duct are observed to be thermal oscillations with the same frequency as the inlet periodic heat input and amplitudes that decayed exponentially with distance along the duct. Thermal response along the wall exhibits negligible amplitude variation with changes in Reynolds number and inlet frequency. The variation in the periods and amplitudes of the thermal oscillations are observed to be a function of spacial system variables only. Satisfactory agreement between the numerical and experimental results are obtained.     

Comparing Rasch analyses probability estimates to sensitivity, specificity and likelihood ratios when examining the utility of medical diagnostic tests

INTRODUCTION: Medical diagnostic tests are evaluated based on measures of sensitivity (Sn), specificity (Sp), and likelihood ratios (LR). These procedures are limited in the event of a biased gold standard or missing data. Interpretations of these measures are frequently inappropriate. PURPOSE: The Rasch measurement model (RMM) was examined as a method to provide evidence of diagnostic test utility in order to overcome the limitations of Sn, Sp, and LR. METHODS: Patients suspected of a knee ligament tear (n = 825) were studied, by evaluating four diagnostic tests. The RMM probability estimates for each test were compared to estimates of Sn, Sp, and LR. RESULTS: The RMM provided probability estimates for the diagnosis that were comparable to likelihood ratios. These probability estimates correlated with the estimates of Sn, Sp, and LR. The RMM estimates were not affected by missing data. DISCUSSION: The RMM may provide an alternative means to study the utility of medical diagnostic tests to estimate the probability of disease presence/absence.     

Sur un modèle précis de la permittivité effective statique de la ligne microruban suspendue uniforme applicable à la technique des LECF

An accurate modelling of static effective permittivity ?_eff of a uniform suspended microstrip line is presented. This modelling is built on the variational method of moments (Vm). But this method requires high times computing for line of arbitrary shape, the width w of the uniforme line is reduced by the thickness h₁ of the air gap. The stratified microstrip patch antennas with an air gap, of arbitrary shape present this type of situation in the analysis with the method of the Finished Coupled Elementary Lines (F.c.e.l). A formal model proposed in this work, is free of integration and derivation, and is connecting the physical parameters (such as the relative permittivities ?_ri of the mediums i = 1,2…) with those of the geometrical structure (u = w/h₁ and m — h₂/h₁ where h₂ is the thickness of dielectric). The new model is valid for the full 1 ≤ ?_r ≤20, 0.5 ≤m≤ 1.5, 10^?2 ≤ult; +∞ ranges. The model is successfully compared with mesured data. This work give an accurate evaluation of ?_eff then the frequency dependence of the effective permittivity can be easily determined.     

Enhancing the prediction of type 2 diabetes mellitus using sparse balanced SVM

Multimedia Tools and Applications - The natural population-based prediction of type 2 diabetes is costly since it needs a high number of resources. Even though much research has used machine...     

Ion sensitive field effect transistor based on graphene and ionophore hybrid membrane for phosphate detection

Microsystem Technologies - This paper reports ion sensitive field effect transistor (IS-FET) with graphene/ionophore hybrid membrane for phosphate detection. CVD graphene is used as a sensing...