Cancellation of the signal fading for 60 GHz subcarrier multiplexedoptical DSB signal transmission in nondispersion shifted fiber usingmidway optical phase conjugation

In millimeter-wave (mm-wave) optical double sideband (DSB) signal transmission systems, the received radio frequency (RF) power fades periodically because of the group velocity dispersion (GVD) and the self-phase modulation (SPM) of optical fibers. In this paper, cancellation of the signal fading by using midway optical phase conjugation in mm-wave subcarrier multiplexed (SCM) optical DSB signal is analyzed. Fading-free 60 GHz mm-wave optical DSB signal transmission over 100 km-long nondispersion shifted single-mode fiber at 1550 nm by using a semiconductor optical amplifier (SOA) optical phase conjugator (OPC) in the midway of optical link is experimentally demonstrated for the first time. Finally, the degradation factor of the OPC system is also discussed     

Polymers of α-substituted benzyl methacrylates as a new type of electron-beam resist

Summary Polymer of α-substituted benzyl methacrylate was found to be used as a new type of positive electron-beam resist, which forms methacrylic acid units in the polymer chain on the exposure to electron-beam and can be developed using alkaline solution as a developer. The sensitivity was dependent on the bulkiness of the ester group and the number of ?-hydrogen atoms in the ester group. The sensitivity and γ-value of atactic poly(α, α-dimethylbenzyl methacrylate) were improved by a factor of more than three over poly (methyl methacrylate).     

Measurement of vertical and horizontal vibrations of a probe for acoustic evaluation of food texture

Two‐dimensional (vertical and horizontal) vibrations of a wedge‐type probe upon food rupture were evaluated separately using two accelerometers placed perpendicular to a guide rod of a swing‐arm device for texture evaluation of the flesh of three varieties of apples and three types of potato chips. Voltage signals from the accelerometers were filtered using a half‐octave band‐pass filter. The energy texture index (ETI), based on kinetic energy of the vertical or horizontal probe vibrations, was calculated over low to high frequency bands (no. 1–21). The spectra for the flesh of the three varieties of apples included two common peaks for vertical ETI at band no. 11 (1,120–1,600 Hz) and 19 (17,920–25,600 Hz) and horizontal ETI at band no. 1 (0–10 Hz) and 15 (4,480–6,400 Hz). The spectra for the three types of potato chips had a common ETI peak at band no. 11 (1,120–1,600 Hz) for horizontal ETI and at no. 15 (4,480–6,400 Hz) for vertical ETI. The three apple varieties gave rise to different intensities of vertical and horizontal ETIs while the two peaks were maintained. The thick potato chip type had higher vertical and horizontal ETIs than the thin and soft varieties in most bands; however, the thin type had the highest vertical ETIs only in lower bands (0–200 Hz). The soft type had the lowest vertical and horizontal ETI. The above results suggest that different food textures can be distinguished by two‐dimensional vibration analyses of probe insertion into a food sample based on frequency bands.     

Structural analysis of iron oxide coated n-silicon heterojunction photoanodes

The iron oxide/n-Si heterojunction electrode was investigated as a possible efficient photoanode with the iron oxide prepared under various conditions. The oxide structure was studied by RBS (Rutherford backscattering spectrometry) and XPS (X-ray photoelectron spectroscopy) techniques and the correlation between photocharacteristics and its oxide structure was discussed. The iron oxide prepared by thermal oxidation and reactive-evaporation methods. The photocurrent in a 0.2 mol dm^?3 KOH solution was found to strongly depend on the preparation of the iron oxide. The reactive-evaporated Fe₂O₃/n-Si electrode showed the most effective characteristics of photoresponse and the 60 min thermally oxidized Fe₂O₃/n-Si electrode gave the best results in the thermally oxidized oxide system. The compositional analysis by RBS indicated that the oxide is formed stoichiometrically as Fe₂O₃ and that small amounts of a heavy-mass and a tungsten impurity are present in the thermally oxidized and the reactive-evaporated oxides, respectively. The XPS analysis of the chemical state of the iron in the oxide showed that the chemical state of the iron oxide formed by thermal oxidation varies as a function of depth and that the iron oxide formed by reactive- evaporation is in a almost constant chemical state throughout the film.     

Determination of captafol,cyhexatin, 1-naphthylacetic acid and quintozene in apple,Japanese pear and melon by simultaneous extraction

A simple and rapid method is described for the determination of the non-registered pesticides, captafol, quintozene (PCNB), cyhexatin and 1-naphthylacetic acid (NAA), in fruits. These pesticides were extracted with acidified acetone, then captafol and PCNB were purified with a Florisil mini column and analyzed by GC-ECD. Cyhexatin was ethylated with ethylmagnesium bromide, and the ethyl derivative was analyzed by GC-FPD (Sn filter). NAA was purified with liquid-liquid extraction and determined by HPLC equipped with a fluorescence detector. These analytes were identified with GC/MS or LC/MS. The minimum identified concentration of the pesticides was below 0.2 ng per injection, which corresponds to a detection limit of below 0.02 microgram/g in the original samples. Recoveries of the pesticides spiked at 0.1 microgram/g into apple, Japanese pear and melon were greater than 61%.     

Analysis of imazalil and its major metabolite in citrus fruits by GC-FTD

A simplified simultaneous analytical method of imazalil (IZ) and its major metabolite, alpha-(2,4-dichlorophenyl)-1H-imidazole-1-ethanol (IZM), in citrus fruits was developed, and commodities samples were investigated. A homogenate of citrus fruits was extracted with ethyl acetate under basic conditions. The crude extract was partitioned between 0.025 mol/L of sulfuric acid and ethyl acetate. The analytes were extracted from the aqueous fraction under basic conditions with ethyl acetate. The extract solution was purified with an ENVI-Carb cartridge, and then analyzed by GC-FTD and GC/MS. Recoveries of IZ and IZM added to grapefruit at the level of 0.05 microgram/g were 90.0 and 108.7%, and those in the case of lemon were 100.4 and 93.0%, respectively. The detection limits were 0.01 microgram/g in samples. By this method, IZ and IZM were analyzed in 46 citrus fruits on the market and were detected simultaneously in some samples.     

Thermogravimetric Study of the M-Co-O System: I, M = Ta and Nb at 1200°C

Phase equilibria in the Ta-Co-O and Nb-Co-O systems have been studied at 1200°C at oxygen partial pressures from 10^−0.68 to 10^−13.50 atm for the former and from 10^−0.68 to 10^−13.30 atm for the latter. In both systems, M₂CoO₆ and M₂Co₄O₉ are stable ternary compounds under the experimental conditions, and a new phase, Nb₅Co₂O₁₄, has been identified. The Ta-Co-O system is simple, whereas the Nb-Co-O system is somewhat more complicated because of the extra phase. The lattice constants of the ternary compounds have been determined and compared with previous values. The standard Gibbs energies of reactions have been determined using oxygen partial pressures in equilibrium with three solid phases.     

Effect of microstructures on dielectric breakdown strength of sintered reaction-bonded silicon nitride ceramics

Silicon nitride (Si₃N₄) was prepared from silicon by a sintered reaction-bonded silicon nitride method using yttria and magnesia as sintering additives. Post-sintering (PS) of nitrided compacts was carried out at 1850°C under a nitrogen pressure of 1 MPa. Effect of PS time on microstructure and dielectric breakdown strength (DBS) of the prepared Si₃N₄ ceramics was evaluated. The DBS was measured using specimens with four different thicknesses (0.30, 0.20, 0.10, and 0.05 mm) in order to examine the thickness dependence. The porosity of the sintered Si₃N₄ decreased by prolonging the PS time, and the full density could be achieved at the PS time of over 6 h. After full densification, rod-like β-Si₃N₄ grains grew up, and their maximum grain size increased from 45.1 to 154.7 μm by prolonging the PS time from 6 to 48 h. The DBS of the thick Si₃N₄ substrates (0.30 mm) showed little variation from 35.4 to 47.0 kV/mm, regardless of the PS time. On the other hand, that of the thin ones (0.05 mm) dramatically decreased from 99.5 to 9.8 kV/mm with increased the PS time from 6 to 48 h. Because the DBS sharply decreased at the thin substrate sintered for longer time in which some large-elongated grains might span the substrate thickness-wise throughout, it was inferred that the interface between β-Si₃N₄ grains and grain boundary phase/intergranular glassy films might be a path of the dielectric breakdown.     

The Wulff Shape of Alumina: IV. Ti4+-Doped Alumina

Controlled-geometry cavities, initially ≈20 μm × 20 μm × 0.5 μm, were introduced into     -plane titanium-doped (≈210 ppma;≈500 wt. ppm) sapphire substrates using photolithographic methods, and subsequently internalized by diffusion bonding. The samples were annealed in air for prolonged periods at 1600° and 1800°C to convert the titanium to the 4+ state and to allow the pore shapes to adjust. Pores with an equivalent spherical radius of ≈3.6 μm reached a quasi-equilibrium shape within 160 h at 1600°C and within 48 h at 1800°C. The Wulff shape was determined using optical microscopy, scanning electron microscopy, and atomic force microscopy. The Wulff shape of Ti⁴⁺-doped alumina includes well-defined c(0001),     , and     facets and smoothly curved sections. The     and a     facets, which are components of the Wulff shape of undoped sapphire, are not discernable. In contrast to undoped alumina, for which the r-plane has the lowest energy, the c-plane is the lowest energy plane in Ti⁴⁺-doped alumina. The surface energy sequence of the stable c, r, and p surfaces differs from that in undoped alumina. The Wulff shape varies with temperature. Samples equilibrated at 1800°C were re-annealed at 1600°C. Pore shape changes were reversible, indicating that the observed pore shapes were close to the equilibrium (Wulff) shape.     

Long Crack R-Curve of Aligned Porous Silicon Nitride

Long crack R -curve of a porous Si₃N₄ with aligned fibrous grains was investigated, using a chevron-notched beam technique. A crack was constrained to propagate normal to the grain alignment. The crack growth resistance of aligned porous Si₃N₄ was much larger compared with that of dense Si₃N₄ ceramics. Microstructure observations showed that pullouts of fibrous grains in aligned porous Si₃N₄ markedly increased during crack propagation relative to those of dense Si₃N₄, due to the existence of pores. The efficient grain pullouts in porous Si₃N₄ increased the bridging stress at the crack wake.