Constant-phase-mode operation of the light-addressable potentiometric sensor

The constant-phase-mode operation of the light-addressable potentiometric sensor (LAPS) is proposed and demonstrated. In this new operation mode, the temporal change and the spatial distribution of the analyte concentration are recorded in the form of the bias voltage applied to the LAPS sensor plate, which is servo-controlled to maintain the phase of the photocurrent at a constant value with respect to the light modulation. The constant-phase-mode LAPS is advantageous for its wider measurement range and reduction of artifacts.     

Stability of liquid‐crystal layers based on the analysis of the adsorption on the alignment‐layer surface

Abstract— The adsorption strength of liquid‐crystal molecules on the alignment‐layer (polymer) surface was judged measuring temperature dependence of birefringence of an absorbed liquid‐crystal layer above the nematic—isotropic transition temperature. The relationship between the surface‐order parameter and the adsorption strength of liquid‐crystal molecules on the non‐rubbed polymer surface was also discussed.     

Novel screen technology for high‐contrast front‐projection display by controlling ambient‐light reflection

Abstract— One problem with front‐projection displays is that the screen contrast ratio decreases in bright ambient light. In this paper, we propose a new front‐projection display system that incorporates the control of reflection of ambient light in the screen design, providing a high contrast ratio even in a brightly lit room.     

Stabilization of geometrically nonlinear topology optimization by the Levenberg–Marquardt method

This paper deals with the design of compliant mechanisms in a continuum-based finite-element representation. Because the displacements of mechanisms are intrinsically large, the geometric nonlinearity is essential for designing such mechanisms. However, the consideration of the geometric nonlinearity may cause some instability in topology optimization. The problem is in the analysis part but not in the optimization part. To alleviate the analysis problem and eventually stabilize the optimization process, this paper proposes to apply the Levenberg–Marquardt method to the nonlinear analysis of compliant mechanisms.     

Face relighting using discriminative 2D spherical spaces for face recognition

As part of the face recognition task in a robust security system, we propose a novel approach for the illumination recovery of faces with cast shadows and specularities. Given a single 2D face image, we relight the face object by extracting the nine spherical harmonic bases and the face spherical illumination coefficients by using the face spherical spaces properties. First, an illumination training database is generated by computing the properties of the spherical spaces out of face albedo and normal values estimated from 2D training images. The training database is then discriminately divided into two directions in terms of the illumination quality and light direction of each image. Based on the generated multi-level illumination discriminative training space, we analyze the target face pixels and compare them with the appropriate training subspace using pre-generated tiles. When designing the framework, practical real-time processing speed and small image size were considered. In contrast to other approaches, our technique requires neither 3D face models nor restricted illumination conditions for the training process. Furthermore, the proposed approach uses one single face image to estimate the face albedo and face spherical spaces. In this work, we also provide the results of a series of experiments performed on publicly available databases to show the significant improvements in the face recognition rates.     

Scanning-laser-beam semiconductor pH-imaging sensor

We have constructed a two-dimensional (2-D) pH-imaging sensor that enables us to observe th H⁺ distribution produced by living cells. The pH-sensing principle is similar to that of thelight-addressable potentiometric sensor. The electrolyte-insulator-semiconductor (EIS) structure (electrolyte---Si₃N₄---SiO₂---Si) is illuminated by a focused (1 μm) and modulated (1–10 kHz) He—Ne laser bean from the backside of the semiconductor, and the a.c. photocurrent flowing through the EIS structure is measured. By scanning the laser beam, 2-D pH images can be obtained. By using this sensor, pH distributions of colonies of yeast (Saccharomyces cerevisiae) have been observed. The spatial resolution of this sensor could be improved by thinning the Si wafer.     

Sensitivity of an anadically oxidized aluminium film on a surface acoustic wave sensor to humidity

The sensitivity, transient response and sensitivity mechanism of a surface acoustic wave humidity sensor using porous anodically oxidized aluminium (alumina) films as mechanical interfaces have been studied theoretically and experimentally. It is found that the sensitivity of alumina films of 1.0 μm thickness is -0.034 m/(s %RH) and is the same order as that of polyimide films. The transient response of alumina films to humidity is about one order faster than that of polyimide films. For the sensitivity mechanism, the phase-velocity change is attributed to the mechanical perturbation caused by the absorption of water molecules. The equivalent density change of alumina films between 0 and 100%RH is about 0.7%. In addition, the actual stiffness constants of alumina films are two orders less than those of bulk alumina.     

A portable toolkit for supporting end-user personalization and control in context-aware applications

A context-aware application in the pervasive computing environment provides intuitive user centric services using implicit context cues. Personalization and control are important issues for this class of application as they enable end-users to understand and configure the behavior of an application. However most development efforts for building context-aware applications focus on the sensor fusion and machine learning algorithms to generate and distribute context cues that drive the application with little emphasis on user-centric issues. We argue that, to elevate user experiences with context-aware applications, it is very important to address these personalization and control issues at the system interface level in parallel to context centric design. Towards this direction, we present Persona, a toolkit that provides support for extending context-aware applications with end-user personalization and control features. Specifically, Persona exposes a few application programming interfaces that abstract end-user customization and control mechanisms and enables developers to integrate these user-centric aspects with rest of the application seamlessly. There are two primary advantages of Persona. First, it can be used with various existing middlewares as a ready-to-use plug-in to build customizable and controllable context-aware applications. Second, existing context-aware applications can easily be augmented to provide end-user personalization and control support. In this paper, we discuss the design and implementation of Persona and demonstrate its usefulness through the development and augmentation of a range of common context-aware applications.