Quick Activation of Optimized Zeolites with Microwave Heating and Utilization of Zeolites for Reusable Desiccant

Effectiveness of microwave heating in an activation treatment of zeolites was studied and utilization of zeolites for reusable desiccant was examined. X zeolite was chosen as a target material for its large adsorption capacity. Na-X zeolite easily caused a thermal runaway by microwave radiation of 500 W but Ca contained X zeolite merely reached ca. 573 K under the same conditions. Mixtures of Na-X and Ca-X with suitably mixed ratios did not cause the thermal runaway and their heating temperatures were controlled (>573 K) at will. Under the most suitable conditions, the mixture reached a dehydration degree of 92%. A degradation degree of adsorptive capacity of the mixture for water was examined after three treatments. The average degradation degree was 1.5% per treatment. The heating method is promising as a quick and easy technique to activate zeolite. By applying the method, the zeolites with suitable mixing ratios are usable as a reusable desiccant for home use.     

Estimation of Stress Exponent and Activation Energy for Rapid Densification of 8 mol% Yttria‐Stabilized Zirconia Powder

The rapid densification behavior of 8 mol% Y₂O₃‐stabilized ZrO₂ polycrystalline (8Y‐SZP) powder compacts at the initial stage of pressure sintering (relative density () below 0.92) has been investigated using an electric current‐activated/assisted sintering (ECAS) system. Data points corresponding to a fixed heating rate were extracted from the densification rate () versus ρ and versus temperature (T) curves. These curves were obtained experimentally by consolidation at a fixed current. Under fixed current ECAS, the heating rate () decreases continuously over sintering time. Using a quasi‐ constant heating rate (CHR) method, data points were extracted to plot vs. ρ, vs. T, and ρ vs. T curves at a fixed . The stress exponent (n), estimated from a log‐log plot of grain size (d)‐corrected /ρ and effective stress (σ_eff) at 1300–1400 K, shows an almost constant value of 1. In addition, the activation energy (Q) for rapid densification, estimated from an Arrhenius plot of d‐corrected /ρ also shows an almost constant value of 350 kJ/mol, which is considerably lower than the previously reported value of the activation energy for Zr⁴⁺ lattice diffusion of about 440 kJ/mol. These results suggest that rapid densification of 8Y‐SZP by ECAS seems to proceed by diffusional creep controlled by grain‐boundary diffusion of Zr⁴⁺ ions.     

Improvement of electrochemical properties of PEO–LiTFSI electrolyte by incorporation of boroxine polymers with different backbone lengths

A series of boroxine polymers (BP) with different backbone lengths were synthesized. Polymer electrolytes prepared by blending poly(ethylene oxide) (PEO) and BP with Li(N(SO ₂CF₃)₂) (LiTFSI) were evaluated. Better performance was observed by addition of BP in the PEO based polymer electrolyte. The effect of the backbone length of BP on electrochemical properties of PEO–BP–LiTFSI electrolyte systems was investigated. Compared with the PEO–LiTFSI system, about five times higher ionic conductivity at low temperature and five times higher lithium ion transference number at 70°C were achieved by incorporation of long chain BP in the electrolyte. Short chain BP exhibited outstanding performance in decreasing interfacial resistances on both anode and cathode surfaces. Good battery performance was also observed for these BP containing hybrid polymer electrolytes.     

Acceleration of the redox kinetics of VO2+/VO2 + and V3+/V2+ couples on carbon paper

The redox kinetics of VO²⁺/VO₂ ⁺ and V³⁺/V²⁺ couples on a carbon paper (CP, HCP030 N, Shanghai Hesen, Ltd., China) electrode were investigated in terms of their standard rate constant (k ₀) and reaction mechanism. The values determined for k ₀ for VO²⁺ ?? VO₂ ⁺ and V³⁺ ?? V²⁺ using the CP electrode are 1.0 × 10^?3 and 1.1 × 10^?3 cm s^?1, respectively. The value of k ₀ increases by one or two order(s) of magnitude compared with values obtained using electrodes composed of pyrolytic graphite and glassy carbon. The acceleration of the redox kinetics of vanadium ions is a result of the large surface area of the CP electrode. An inner-sphere mechanism for the reaction on the surface of the electrode is proposed. The kinetic features of vanadium redox reactions on the CP electrode reveal that CP is suitable for use as the electrodes in vanadium redox-flow batteries.     

Effects of hydrophobic chain length on temperature dependence of monolayer behavior of ester-type tartaric geminis

Ester-type tartaric gemini amphiphiles bearing two carboxyl groups and two hydrophobic alkanoyl groups were prepared from L-tartaric acid, and the pressure-area (π-A) isotherms for a series of symmetric tartaric gemini amphiphiles were measured by the conventional film-balance technique. The effects of the length of the hydrophobic alkanoyl chains and of the subphase temperature (T(sub)) on the π-A isotherms for these compounds were examined. As the length of the hydrophobic alkyl chain increased, a more tightly packed monolayer was formed at the air-water interface. The melting temperature (T(m)) of the monolayer on the water surface was evaluated from the subphase temperature (T(sub)) dependence of the monolayer static elasticity ε(s), based on a π-A isotherm. A clear relationship between T(m) and hydrophobic carbon number (n) was observed for 2D monolayers of tartaric geminis on water surfaces, as well as for fatty acids and/or 3D solids.     

High oleic acid oil suppresses lung tumorigenesis in mice through the modulation of extracellular signal-regulated kinase cascade

This study was undertaken to estimate the effect of dietary high oleic acid oil (OA) on 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone (NNK)-induced lung tumorigenesis in mice. Diet containing 10% oil was fed to mice through experimental periods. On day 30 after NNK injection (100 mg/kg body weight, i.p.), the treatment increased the level of prostaglandin E₂ (PGE₂) as well as proliferating cell nuclear antigen, a marker of cell proliferation in a high linoleic acid oil (LA)-fed group but not in an OA-fed group. The NNK treatment also induced the activation of an extracellular signal-regulated kinase (Erk) cascade (Erk, Mek and Raf-1) in an LA-fed group. On the other hand, OA feeding abolished the NNK-induced activation of the Erk cascade. In conjugation with these events, OA feeding reduced lung tumor incidence and tumor multiplicity (percentage of mice with tumors) in mice compared with LA feeding at the 20th experimental week. These results suggest that OA suppresses lung tumorigenesis and that this suppression is correlated with the inhibition of PGE₂ production and inactivation of the Erk cascade.     

Morphology development of 10‐μm scale polymer particles prepared by SPG emulsification and suspension polymerization

Classicalparticle morphologies, core‐shell, hemisphere, sandwich, and so on, were all reproducible by starting from ca. 10‐μm uniform droplets composed of monomers, initiator, solvents, and polymer, and polymerizing them by subsequent suspension polymerization. SPG (Shirasu porous glass) membrane was employed to form uniform size droplets having the coefficient of variation (CV) around 10%. Styrene (ST) and acrylic monomers were used as monomers, and their polymers were dissolved in the droplets to investigate the development of phase separation. When hydrophilic methyl methacrylate (MMA) was polymerized in the droplets with a mixed solvent consisting of hydrophilic hexanol (HA) and hydrophobic benzene and hexadecane (HD), the resulting morphology shifted from hemisphere to sandwich and eventually to PMMA/solvent core‐shell with increasing hydrophilicity of the mixed solvent. The sandwich was converted to the core‐shell after several weeks elapsed. As styrene was added to MMA, the morphology shifted from hemisphere core/solvent shell to raspberry core/solvent shell as the fraction of ST increased. The domain of the mixed solvent in the raspberry core was reduced with increasing the hydrophilicity of the mixed solvent. All these morphologies were eventually converted to the copolymer core/solvent shell. When a mixed monomer of styrene and MMA dissolving polystyrene (PS) was polymerized, the resulting morphology shifted from salami to core‐shell with increasing the MMA fraction in the comonomer. The salami particles were then swollen with toluene, and after the swelling, toluene was removed under the different temperature and pressure. The final particle morphology converted to the core‐shell with a milder rate of toluene removal which was predicted from the thermodynamic model. When styrene and cyclohexyl acrylate (CHA), a pair with widely different reactivity ratios, were copolymerized, salami morphologies, with tiny CHA‐rich domains dispersed in the matrix, were obtained even at a higher fraction of CHA in comonomer. Effects of glass transition temperature of the polymers, molecular weight, and the composition of copolymers were taken in consideration whenever the final morphologies were discussed. By these experiments, the authors tried to demonstrate an advantage of using large uniform spheres for the particle morphology studies. SPG emulsification technique was a potential tool because of its free formulation of the droplets, and the subsequent polymerization could undergo without the breakup or coalescence of the droplets. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 79: 2200–2220, 2001     

α-Amylase immobilization capacities of mesoporous silicas with different morphologies and surface properties

α-Amylase was encapsulated in several mesoporous materials (folded sheet mesoporous silica (FSM), cubic mesoporous silica (KIT-6), and two-dimensional hexagonal mesoporous silica (SBA-15)) that differed morphologically in terms of particle shape, pore size, and pore structure. The encapsulation capacity and thermal stability of encapsulated α-amylase were examined. The amount of α-amylase encapsulated increased with increasing pore size in the following order: SBA-15 < KIT-6 < FSM. Nitrogen adsorption experiments were performed before and after α-amylase encapsulation in mesoporous silicas with pore sizes larger than the size of α-amylase, confirming that α-amylase was encapsulated in the pores. Among mesoporous silicas with similar pore sizes, FSM was found to have the highest capacity for α-amylase encapsulation both per weight and per surface area of silica. Furthermore, α-amylase encapsulated in FSM demonstrated high thermal stability at 90 °C relative to the thermal stability of free α-amylase or free α-amylase encapsulated in other mesoporous silicas. Zeta potential measurements showed that the FSM surface had an isoelectric point that was lower than that of other mesoporous silicas, and hydrophilicity measurements showed that its surface was more hydrophilic. The surface properties of FSM contributed to the high thermal stability of the α-amylase encapsulated within the pores.     

Role of zinc compounds on the formation, morphology, and adsorption characteristics of β-FeOOH rusts

To simulate the corrosion of galvanized steel in marine zone, β-FeOOH was prepared by aging the FeCl₃ solutions containing ZnCl₂ and zinc rusts such as ZnO and zinc hydroxychloride (Zn₅(OH)₈Cl₂·H₂O:ZHC). Adding ZnCl₂, ZnO, and ZHC inhibited the crystallization and particle growth of β-FeOOH and the inhibitory effect was in order of ZHC ≈ ZnO > ZnCl₂. The adsorption of H₂O and CO₂ was suppressed by adding ZnCl₂, ZnO, and ZHC. These results imply that the rust formed on galvanized steel in marine environment is more compact, amorphous, and hydrophobic in nature which may lead to improve the corrosion resistance.     

Study on dominant mechanism of high-cycle fatigue life in 6061-T6 aluminum alloy through microanalyses of microstructurally small cracks

The mechanism controlling the fatigue life of a precipitation-hardened Al–Mg–Si alloy (6061-T6) at a high-cycle fatigue (HCF) regime of over 10⁷ cycles was investigated in detail. It was found that over 90% of the total fatigue life was occupied by the growth process of a microstructurally small crack at relatively low stress amplitude. The small crack was often found to be arrested and halted for a long period (more than 10⁶ cycles) before it began to grow again, which resulted in a significantly slow growth process. The small crack was then analyzed not only by the conventional fractography but also by the cross-sectional observation of the crack tip region using a focused ion beam and transmission electron microscopy. These observations, supplemented also by a grain orientation analysis using electron backscattered diffraction, explicitly revealed the following points: (i) the small crack growth observed on the specimen surface is primarily related to facet-type cracking that occurs exclusively at the specimen surface; (ii) the growth direction of the small crack has strong anisotropy (i.e. surface-induced growth); (iii) the facet-type cracking is related to the formation of persistent fine slip bands that accompany no structural change of the matrix. On the basis of these results, the micromechanism of small crack growth and its relation to the concept of fatigue limit at the HCF regime is discussed in detail.