Optical resolution of racemic amino acid derivatives with chiral polyamides bearing glutamyl residue as a diacid component

Novel chiral polyamides with chiral environment in their main chains were obtained from aromatic diamine, 4,4′‐diaminodiphenylmethane (DADPM), and the D ‐isomer or the L ‐isomer of N‐α‐protected glutamic acid, such as N‐α‐benzyloxycarbonyl‐D ‐glutamic acid (Z‐D ‐Glu‐OH) or N‐α‐benzyloxycarbonyl‐L ‐glutamic acid (Z‐L ‐Glu‐OH), in the presence of triphenyl phosphite (TPP). Two types of newly prepared polyamide showed optical rotation, implying that there were asymmetric carbons in their main chains. Circular dichroism studies demonstrated that resulting chiral poly‐ amides took a helical structure. Optical resolution ability of those two types of polyamide was studied by adopting potential difference as a driving force for membrane transport. Membranes showed permselectivity toward racemic mixture of N‐α‐acetyltryptophan (Ac‐Trp). The permselectivity was dependent on the absolute configuration of diacid component. The permselectivity was expressed by diffusivity selectivity, which was determined by the presence of chiral helicity. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Non‐Enzymatic Geometry‐Selective Acylation of Tri‐ and Tetrasubstituted α,α′‐Alkenediols

A highly geometry‐selective organocatalytic acylation of tri‐ and tetra‐substituted 2‐alkylidene‐1,3‐propanediols has been developed. The highly E‐selective acylation of various tetrasubstituted 2‐alkylidene‐1,3‐propanediols was achieved in 96 to >99% selectivity for the first time by a non‐enzymatic protocol.     

Graft polymerization of vinyl acetate onto silica

The free‐radical graft polymerization of vinyl acetate onto nonporous silica particles was studied experimentally. The grafting procedure consisted of surface activation with vinyltrimethoxysilane, followed by free‐radical graft polymerization of vinyl acetate in ethyl acetate with 2,2′‐azobis(2,4‐dimethylpentanenitrile) initiator. Initial monomer concentration was varied from 10 to 40% by volume and the reaction was spanned from 50 to 70°C. The resulting grafted polymer, which was stable over a wide range of pH levels, consisted of polymer chains that are terminally and covalently bonded to the silica substrate. The experimental polymerization rate order, with respect to monomer concentration, ranged from 1.61 to 2.00, consistent with the kinetic order for the high polymerization regime. The corresponding rate order for polymer grafting varied from 1.24 to 1.43. The polymer graft yield increased with both initial monomer concentration and reaction temperature, and the polymer‐grafted surface became more hydrophobic with increasing polymer graft yield. The present study suggests that a denser grafted polymer phase of shorter chains was created upon increasing temperature. On the other hand, both polymer chain length and polymer graft density increased with initial monomer concentration. Atomic force microscopy–determined topology of the polymer‐grafted surface revealed a distribution of surface clusters and surface elevations consistent with the expected broad molecular‐weight distribution for free‐radical polymerization. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 300–310, 2003     

Effect of acid treatment on thermal extraction yield in ashless coal production

Coals of different ranks were acid-treated in aqueous methoxyethoxy acetic acid (MEAA), acetic acid (AA), and HCl. The acid-treated coals were extracted with polar N-methyl-2-pyrrolidinone (NMP) and nonpolar 1-methylnaphthalene (1MN) solvents at temperatures from 200 to 360 °C for 10-60 min. The thermal extraction yields with NMP for some acid-treated low-rank coals increased greatly; for example, the extraction yield for Wyodak coal (%C; 75.0%) increased from 58.4% for the raw coal to 82.9% for coal treated in 1.0 M MEAA. Conversely, the extraction yields changed minimally for all the acid-treated coals extracted in 1-MN. The type and concentration of acid affected the extraction yield when NMP was used as the extraction solvent. With increasing MEAA concentration from 0.01 to 0.1 M, the extraction yield for Wyodak coal increased from 66.3 to 81.4%, and subsequently did not change clearly with concentration. Similar changes in the extraction yield with acid concentration were also observed with AA and HCl. The de-ashing ratio for coals acid-treated in MEAA, AA, and HCl also increased greatly with concentration from 0.01 to 0.1 M, which corresponded to the change in the thermal extraction yield in NMP. For the acid-treated coals, high extraction yields were obtained at lower extraction temperatures and shorter extraction times than for the raw coal. The mechanisms for the acid treatment and thermal extraction are discussed.     

Effects of dietary defatted squid on cholesterol metabolism and hepatic lipogenesis in rats

Male Sprague-Dawley rats were fed a cholesterol-free (Exp. 1) or cholesterol-supplemented (Exp. 2) diet containing 20% casein (control group) or 15% defatted squid and 5% casein (defatted squid group), as protein, for 14 d. Serum and hepatic cholesterol concentrations were lower in rats fed defatted squid than in those fed casein in both cholesterol-free (−20%, P<0.05 and −15%, P<0.05, respectively) and cholesterol-supplemented (−25%, P<0.05 and −15%, P<0.05, respectively) diets. Hepatic triglyceride concentration was lower in the defatted squid than in the control groups in both cholesterol-free (−51%, P<0.05) and cholesterol-supplemented diets (−38%, P<0.01). The activities of cytosolic fatty acid synthase and the NADPH-generating enzymes, malic enzyme and glucose-6-phosphate dehydrogenase, in the liver were lower in the defatted squid than in the control groups in both cholesterol-free (−21%, P<0.01, −33%, P<0.05, and −33%, P<0.01, respectively) and cholesterol-supplemented diets (−34%, P<0.05, −57%, P<0.05, and −67%, P<0.05, respectively). The activity of mitochondrial carnitine palmitoyltransferase in the liver was comparable between the control and defatted squid groups. The activity of Mg²⁺-dependent phosphatidate phosphohydrolase in the liver cytosol was lower in the defatted squid (−9%, P<0.05) than in the control groups only in the cholesterol-free diet. Fecal excretion of total steroids was stimulated by the feeding of defatted squid in both cholesterol-free (+77%, P<0.005) and cholesterol-supplemented diets (+29%, P<0.01). These results suggest that the nonlipid fraction of squid exerts a hypocholesterolemic effect by increasing the excretion of total steroids in feces. The fraction also induces a triglyceride-lowering activity in the liver by decreasing hepatic lipogenesis.     

Power characteristics of unsteadily forward–reverse rotating impellers in an unbaffled aerated agitated vessel

Power characteristics of an unbaffled aerated agitated vessel with unsteadily forward‐reverse rotating impellers, ie a new type of gas–liquid agitator named ‘AJITER’, treating viscous Newtonian liquids were studied experimentally. Measurements were first made on the agitation torque, ie the torque on the drive shaft on which forward–reverse rotating impellers with four delta‐type blades were attached, and the data obtained were analyzed by fitting them to an equation consisting of two terms with respect to the resistance of the fluid, one due to viscous drag and the other due to added moment of inertia. The effects of operating conditions and physical properties of liquids on the drag and added moment of inertia coefficients were then evaluated, and empirical relationships which estimate values of these coefficients, useful to predict the unsteady behavior and magnitude of agitation torque, were presented. Furthermore, equations were developed for estimating the average and maximum power consumptions as a function of the drag and added moment of inertia coefficients. Prediction of respective power levels in AJITER by these equations was also discussed. © 2001 Society of Chemical Industry     

Matrix influence on the piezoelectric properties of piezoelectric ceramic/polymer composite exhibiting particle alignment

This study was addressed to the influence of an electric field strength applied at fabrication process and matrix properties, such as the dielectric constant and the Young's modulus, on “pseudo‐1‐3 piezoelectric ceramic/polymer composite” in order to further enhance the piezoelectricity of that. The pseudo‐1‐3 piezoelectric ceramic/polymer composite consists of linearly ordered piezoelectric ceramic particles in polymer material. Silicone gel, silicone rubber, urethane rubber, and poly‐methyl‐methacrylate, which exhibit different dielectric constants and Young's modulus, were used as matrices to evaluate the matrix influence. The piezoelectricity of the pseudo‐1‐3 piezoelectric ceramic/polymer composite was evaluated using the piezoelectric strain constant d₃₃. The d₃₃ is one of the indices of the piezoelectric properties for piezoelectric materials. As a result, it was confirmed that d₃₃ of the pseudo‐1‐3 piezoelectric ceramic/polymer composite increased with the increase of the electric filed strength applied at fabrication process, though, it reached a constant value at a certain strength value. Further it was confirmed that dielectric constant of the matrix had a small influence on d₃₃ of the pseudo‐1‐3 piezoelectric ceramic/polymer composite, however, in case of matrix of lower Young's modulus, d₃₃ was increase. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41817.     

Immunological Effects of Oenothein B,an Ellagitannin Dimer,on Dendritic Cells

Oenothein B is a unique macrocyclic ellagitannin dimer that has been found in various medicinal plants belonging to Onagraceae, Lythraceae, and Myrtaceae, with diverse biological activities. The immunological effects of tannins in terms of cytokine-release from macrophages and monocytes have been discussed, while the effects on other immunocompetent cells have been the subject of minimal investigation. We evaluated the immunomodulatory effects induced by tannin treatment in human dendritic cells (DCs), which play a critical role in the initial immune response, by measuring the changes in cytokine production, cell differentiation, and cell viability. Oenothein B showed significant down-regulation of the expression of cell surface molecules, CD1a and CD83, suggesting the inhibition of DC differentiation and/or maturation. The suppressive effect on DCs was associated with the induction of apoptosis without the activation of caspase-3/7, 8, and 9, and this was supported by the morphological features indicating significant nuclear condensation. Oenothein B also markedly suppressed the production of inflammatory cytokines, such as IL-1β and IL-6, in a dose-dependent manner. These data may, in part, be able to explain the traditional use of tannin-containing medicinal plants for the treatment of a variety of inflammatory diseases, including inflammatory bowel disease, celiac disease, and rheumatoid arthritis.     

deNOx Performance and Reaction Mechanism of the Di-Air System

The detailed reaction mechanism of Di-Air, which showed the unprecedented high deNO_x performance at high temperature conditions, was studied in this work. Since the Di-Air phenomenon occurs with continuous short pulse injections of hydrocarbons over NSR (NO_x storage and reduction) catalyst, this study focused on the specific function of HC as an effective reductant for NO_x reduction reaction. As a first step, the deNO_x performance was compared with three different reductant gases including CO, H₂ and C₃H₆ in a modified synthetic gas bench equipped with a gas injector which enables continuous small amount of injections. At inlet gas temperature of 450 °C C₃H₆ showed the best deNO_x performance whereas H₂ was the best at 150 °C. Moreover the result of temperature programmed desorption showed that intermediate species represented by –NCO (isocyanates) produced from C₃H₆ was thermally more stable than that produced from CO. These results confirmed that the injected HC reacts with adsorbed NO_x on NSR catalyst generating thermally stable intermediates, which could contribute the high deNO_x performance at high temperature conditions.     

Catalytic Behavior of Bis(Pyrrolide-Imine) and Bis(Phenoxy-Imine) Titanium Complexes for the Copolymerization of Ethylene with Propylene, 1-Hexene,or Norbornene

This contribution reports the catalytic behavior of bis(pyrrolide-imine)Ti complexes 1 and 2 , [2-(RNCH)-C₄H₃N]₂TiCl₂ ( 1 , R = Ph; 2 , R = cyclohexyl), and bis(phenoxy-imine)Ti complex 3 , [2-(Ph-NCH)-3-t Bu-C₆H₃O]₂TiCl₂ for the copolymerization of ethylene with propylene, 1-hexene, or norbornene. An inspection of the X-ray structures of complexes 1–3 suggested that complexes 1 and 2 with pyrrolide-imine ligands would provide more space for olefin polymerization than complex 3 with phenoxy-imine ligands. In addition, DFT calculations also showed that active species derived from complexes 1 and 2 possess higher electrophilicity of the Ti center compared to that from complex 3 . Complexes 1 and 2 on activation with methylalumoxane (MAO) had higher affinity for propylene and 1-hexene and incorporated higher amounts of propylene ( 1 ; 30.5 mol%, 2 ; 23.4 mol%) and 1-hexene ( 1 ; 1.9 mol%, 2 ; 1.7 mol%) than complex 3 (propylene; 4.5 mol%, 1-hexene; 0.4 mol%). The incorporation levels of propylene and 1-hexene displayed by complexes 1 and 2 were lower than those for Cp₂TiCl₂ (propylene; 41.6 mol%, 1-hexene; 5.1 mol%) under identical conditions. In contrast, complexes 1 and 2 exhibited higher incorporation ability for norbornene and produced copolymers with much higher norbornene contents ( 1 ; 32.0 mol%, 2 ; 26.5 mol%) than Cp₂TiCl₂ (1.2 mol%) under the same conditions. Additionally, complex 3 also promoted higher norbornene incorporation (4.3 mol%) than Cp₂TiCl₂ and provided a copolymer with extremely narrow molecular weight distribution (M_w/M_n 1.14). A correlation exists between electrophilicity of the Ti center in active species and norbornene incorporation.