Continuous-velocity lattice gas cellular automata for miscible binary fluid and its application to simulation of interface instability

Continuous-velocity lattice gas cellular automata (CVLGA) is extended to miscible binary fluid systems. A new parameter is introduced in order to control the diffusivity of the fluids. The correlation between the diffusivity and the new parameter proves that there exists the maximum value of the diffusivity. Quantitative verifications of the model are carried out with numerical simulations of the diffusion phenomena across a falling fluid film. The model is then applied to the simulations of Rayleigh-Taylor instability during the gravitational mixing phenomena. The qualitative tendency of the growth of the interface instability is the same as that obtained in conventional numerical methods.     

Streptomyces aminopeptidase P: biochemical characterization and insight into the roles of its N-terminal domain

We purified and characterized the aminopeptidase P from Streptomyces costaricanus TH-4 (thAPP). This enzyme has a tetramer structure, a metal-ion preference toward Zn, broad substrate specificity and a narrow pH dependency for activity. The primary structure of thAPP, respectively, exhibits 91% and 65% identity with those of two other APPs-APP I and APP II-from Streptomyces lividans (slAPP I and slAPP II). We next overexpressed the genes encoding thAPP and slAPP II in Escherichia coli and characterized them. Two differences were apparent in their properties: slAPP II formed a dimer, whereas thAPP formed a tetramer; also, the alkaline side pKa for the catalytic action of slAPP II is higher than that of thAPP. Investigation using chimeras of both enzymes revealed that the N-terminal domain is associated with the determination of pKa values for catalytic action and quaternary structure.     

A 7 ns 1 Mb BiCMOS ECL SRAM with shift redundancy

A 7-Mb BiCMOS ECL (emitter coupled logic) SRAM was fabricated in a 0.8 μm BiCMOS process. An improved buffer with a high-level output of nearly V_CC is adopted to eliminate the DC current in the level converter circuit, and the PMOS transistor has a wide operating margin in the level converter. The configurable bit organization is realized by using a sense-amplifier switch circuit with no access degradation. A wired-OR demultiplexer for the ×1 output, having the same critical path as the ×4 output circuit, allows for the same access time between the two modes. The ×1 or ×4 mode is electrically selected by the external signal. A simplified programming redundancy technology, shift redundancy, is utilized. Address programming is performed by cutting only one fuse in the shift redundancy. The RAM operates at the ECL-10K level with an access time of 7 ns. and the power dissipation at 50 MHz is 600 mW for the × mode     

Detection of norovirus RNA in bivalve molluscs by using bacteria-culture-employed method (A3T method)

Norovirus (NV) RNA has rarely been detected in foods despite the use of highly sensitive methods such as RT-PCR and real-time RT-PCR. In the modified method (A3T method) reported previously, a bacterial culture process was introduced into the standard protocol for NV detection to remove some inhibitor(s) present in food ingredients. To confirm the efficiency of the A3T method and to examine NV contamination in bivalve molluscs, we tried to detect NV RNA in bivalve molluscs on the market and in oyster samples associated with foodborne outbreaks by using the standard method and the A3T method. NV RNAs were detected in 20 samples (18.0%) of 111 bivalve molluscs, including oysters, on the market by use of the A3T method, while only one sample (0.9%) was positive according to the standard method. NV RNA was also detected in 10 of 35 oyster samples related to foodborne outbreaks by the A3T method. Those results show that the A3T method is suitable for the detection of NV in bivalve molluscs in general laboratories.     

Electro-mechanical coupling in ionic gels

An ionic-polymer–metal-composite film shows electro-mechanical coupling. When the film is bent, electric current is induced. Measurement of the induced current indicates that the current depends on the speed of bending, but the total amount of the charge transferred across the film is independent of the speed, and depends only on the magnitude of the bending. The result indicates that in addition to previously proposed dynamical coupling effect, there is a static electro-mechanical coupling effect. Mathematical model is proposed to describe this phenomena.     

Development of Laser Ionization Techniques for Evaluation of the Effect of Cancer Drugs Using Imaging Mass Spectrometry

Recently, combined therapy using chemotherapy and photodynamic therapy (PDT) has been proposed as a means of improving treatment outcomes. In order to evaluate the efficacy of combined therapy, it is necessary to determine the distribution of the anticancer drug and the photosensitizer. We investigated the use of imaging mass spectrometry (IMS) to simultaneously observe the distributions of an anticancer drug and photosensitizer administered to cancer cells. In particular, we sought to increase the sensitivity of detection of the anticancer drug docetaxel and the photosensitizer protoporphyrin IX (PpIX) by optimizing the ionization-assisting reagents. When we used a matrix consisting of equal weights of a zeolite (NaY5.6) and a conventional organic matrix (6-aza-2-thiothymine) in matrix-assisted laser desorption/ionization, the signal intensity of the sodium-adducted ion of docetaxel (administered at 100 μM) increased about 13-fold. Moreover, we detected docetaxel with the zeolite matrix using the droplet method, and detected PpIX by fluorescence and IMS with α-cyano-4-hydroxycinnamic acid (CHCA) using the spray method.     

Numerical Evaluation of Toughening by Crack-Face Grain Interlocking in Self-Reinforced Ceramics

Crack bridging associated with the pull-out process of interlocking grains in self-reinforced ceramic materials is studied through a micromechanical simulation. The pullout of a single inclined grain is modeled via the numerical solution of a general contact problem. The bridging-force versus crack-opening-distance curve indicates a nonlinear, springlike response for the pullout of interlocking grains. The sliding friction along the debonded interface, induced by highly localized contact stresses, dominates the total bridging force. The bridging force increases with grain inclination until eventual bridge failure. The pullout of misaligned grains mainly affects short-crack toughening, with a rising R -curve, whereas aligned grains contribute to long-crack toughening. The residual stresses of the thermal expansion anisotropy play a minor role in the pull-out process of grain interlocking and the resultant toughening. The proposed mechanism is operative in both single-phase and composite ceramics in which pullout of elongated grains/reinforcements occurs.     

Evaluation of temperature characteristics of high-efficiency InGaP/InGaAs/Ge triple-junction solar cells under concentration

Temperature characteristics of the open-circuit voltage (V_oc) were investigated in the temperature range from 30°C to 240°C for the InGaP/InGaAs/Ge triple-junction cells. Also, single-junction cells that had the similar structure to the subcells in the triple-junction cells were studied. In the high-temperature range (from 170°C to 240°C), the temperature coefficients of V_oc of the InGaP/InGaAs/Ge triple-junction solar cell (dV_oc/dT) were different from those in the low-temperature range (from 30°C to 100°C). This is because photo-voltage from the Ge subcell becomes almost 0 V in the high-temperature range. It was found that the open-circuit voltage of a Ge single-junction cell reduced to almost 0 V temperatures over 120°C under 1 sun condition.     

Steam gasification of coal cokes in an internally circulating fluidized bed of thermal storage material for solar thermochemical processes

A laboratory-scale prototype windowed internally circulating fluidized-bed reactor made of quartz sand and coal coke particles was investigated for steam gasification using concentrated Xe-light radiation as the energy source. The quartz sand was used as a chemically inert bed material for the fluidized bed, while the coal coke particles functioned as the reacting particles for the endothermic gasification reaction. The advantages of using quartz sand as the bed material for the directly irradiated gasification reactor are as follows: (1) The bed height is maintained at a constant level during the gasification. (2) The quartz sand functions as a thermal transfer/storage medium inside the reactor. The gasification performances such as the production rates of CO, H₂, and CO₂; carbon conversion; and light-to-chemical energy conversion were evaluated for the fluidized-bed reactor with a thermal transfer/storage medium (quartz sand). The effects of using the bed material (quartz sand) on the gasification performance are described in this paper.