A study of hypervelocity impact on cryogenic materials

This paper reports a result of hypervelocity impact experiments on cryogenically cooled aluminum alloys and a composite material. Experiments are carried out on a target palate at 122 K. Aluminum spheres at 1.95 km/s in 50 kPa air were impinged against the target plate at cryogenic temperature and the result was compared with room temperature target plates. Hypervelocity impact (HVI) processes were visualized with shadowgraph arrangement and recorded with high-speed video camera and to ensure the temperature dependence we compared HVI tests with metal target plates with AUTODYN 2D and SPH numerical simulations. We found that cryogenic impacts created slight differences of impact damage from room temperature ones, i.e., the shape and averaged diameters of HVI crater holes were less at cryogenic impacts.     

Alteration of internal stresses in SiO2/Cu/TiN thin films by X-ray and synchrotron radiation due to heat treatment

A break of wiring by stress-migration becomes a problem with an integrated circuit such as LSI. The present study investigates residual stress in SiO₂/Cu/TiN film deposited on glass substrates. A TiN layer, as an undercoat, was first deposited on the substrate by arc ion plating and then Cu and SiO₂ layers were deposited by plasma coating. The crystal structure and the residual stress in the deposited multi-layer film were investigated using in-lab. X-ray equipment and a synchrotron radiation device that emits ultra-high-intensity X-rays. It was found that the SiO₂ film was amorphous and both the Cu and TiN films had a strong {1 1 1} orientation. The Cu and TiN layers in the multi thick (Cu and TiN:1.0 μm)-layer film and multi thin (0.1 μm)-layer film exhibited tensile residual stresses. Both tensile residual stresses in the multi thin-layer film are larger than the multi thick-layer film. After annealing at 400 °C, these tensile residual stresses in both the films increased with increasing the annealing temperature. Surface swelling formations, such as bubbles were observed in the multi thick-layer film. However, in the case of the multi thin-layer films, there was no change in the surface morphology following heat-treatment.     

A novel chromatographic separation technique using tertiary pyridine resin for the partitioning of trivalent actinides and lanthanides

A novel chromatographic separation technique using a tertiary pyridine type resin has been applied to the partitioning of the trivalent actinides (An) and lanthanides (Ln) and several successful results have been shown. In an alcoholic hydrochloric acid system, the trivalent An were clearly separated from the Ln, while no such group separation was achieved in an alcoholic nitric acid system. On the other hand, the nitric acid system was more effective for the intragroup (i.e. individual) separation of the trivalent An and the Ln than the hydrochloric acid system. On the basis of these results, a novel concept for the partitioning of the trivalent An and Ln using the present separation technique and its flowchart have been proposed with its advantages and disadvantages.     

Activities of Phosphorus in Copper‐Iron Liquid Alloys Saturated with Copper‐Iron Solid Solutions

In order to determine the activities of phosphorus and iron in liquid {Cu‐Fe‐P} alloys, the two coexisting phases of liquid {Cu‐Fe‐P} alloys + <Cu‐Fe‐P> solid solutions were brought into equilibrium with a mixture of Al₂O₃ + AlPO₄ + Fe_xAl₂O₄ at temperatures of 1416K and 1526K. The oxygen partial pressures were measured with the aid of a solid‐oxide galvanic cell of the type: (+)Mo / Mo + MoO₂/ ZrO₂(MgO) / {Cu‐Fe‐P} + <Cu‐Fe‐P> + <Al₂O₃> + <AlPO₄> + <FeAl₂O₄> / Fe(‐) The equilibrium reactions underlying the experiments can be expressed by 2[P]_cu + (5/2) (O₂) + <Al₂O₃> = 2 <AlPO₄> and x[Fe]_Cu + (1/2) (O₂) + <Al₂O₃> = <Fe_xAl₂O₄> The Henrian activity coefficient referred to 1 wt pct solution in pure liquid copper could be well expressed by the formula log f_P° = (4.46±0.40) ‐ (8.67±0.59)/(T/K). The iron activities referred to pure solid iron could be formulated as log a_Fe =‐ (0.37 ± 0.12) + (500 ±200) /(T/K).     

Expression of fibrogenic cytokines in desmoplastic malignant melanoma

OBJECTIVE: Research has confirmed substantial links between OCD and AN. Not only are there psychopathological similarities between the two syndromes, but a marked neurochemical correspondence. Extensive exercising is a common feature of AN and also has relevance in its links with OCD. There is evidence from the exercise-induced weight-loss syndrome in animals that exercise and caloric restriction, in combination, tend to increase serotonergic activity in a synergistic manner. This syndrome has been proposed as a valid model of OCD as well as for AN. To date, little research has directly tested this theory in the human condition. METHOD: Fifty-three AN patients were categorized as high-level exercisers (N = 22) or moderate/nonexercisers (N = 31) based on the frequency of their physical activity over the year before assessment. RESULTS: Exercisers scored significantly higher on a measure of OC personality characteristics, OC symptomatology, and perfectionism--a personality factor associated with the development of Obsessive-Compulsive Personality Disorder. On the other hand, there were no group differences on other salient eating disorder characteristics such as body esteem, self-esteem, or weight preoccupation. There were also no differences in degree of emaciation as indicated by Body Mass Index. CONCLUSIONS: Findings suggest that among AN patients obsessional personality characteristics are linked to high-level exercising, and that exercising is associated with a greater degree of OC symptomatology. Results are discussed in the context of current theories of AN, OCD, and some biological mechanisms.     

Aqueous chromatography utilizing pH-/temperature-responsive polymer stationary phases to separate ionic bioactive compounds

Cross-linked poly(N-isopropylacrylamide-co-acrylic acid) (poly(IPAAm-co-AAc))-grafted silica bead surfaces were prepared and applied as new column matrix materials that exploit temperature-responsive anionic chromatography to separate basic bioactive compounds, specifically catecholamine derivatives, in aqueous mobile phases. Since poly(IPAAm-co-AAc) has a well-known temperature-responsive phase transition and apparent pKa shift, polymer-grafted silica bead surfaces are expected to exhibit simultaneous hydrophilic/hydrophobic and charge density alterations under thermal stimuli. Elution behavior of catecholamine derivatives from a copolymer-modified bead packed column was monitored using aqueous mobile-phase HPLC under varying temperature and pH. Catecholamine derivatives had higher retention times on poly(IPAAm-co-AAc) columns at higher pH in comparison with those on noncharged PIPAAm reference columns, suggesting an electrostatic interaction as a separation mode. Temperature also affected the retention behavior of catecholamine derivatives. Optimal separation of four catecholamine derivatives was achieved at elevated temperature, 50 degrees C, and at pH 7.0. This is due to the increased hydrophobicity of the stationary phase as evidenced by the elution of a nonionic hydrophobic steroid. From these results, mutual influences of both electrostatic and hydrophobic interactions between basic catecholamine derivatives and pH-/temperature-responsive surfaces are noted. Consequently, elution of weakly charged bioactive compounds is readily regulated through the modulation of stationary-phase thermoresponsive hydrophilic/hydrophobic and charge density changes.     

Bile Acid–Drug Interaction via Organic Anion-Transporting Polypeptide 4C1 Is a Potential Mechanism of Altered Pharmacokinetics of Renally Excreted Drugs

Patients with liver diseases not only experience the adverse effects of liver-metabolized drugs, but also the unexpected adverse effects of renally excreted drugs. Bile acids alter the expression of renal drug transporters, however, the direct effects of bile acids on drug transport remain unknown. Renal drug transporter organic anion-transporting polypeptide 4C1 (OATP4C1) was reported to be inhibited by chenodeoxycholic acid. Therefore, we predicted that the inhibition of OATP4C1-mediated transport by bile acids might be a potential mechanism for the altered pharmacokinetics of renally excreted drugs. We screened 45 types of bile acids and calculated the IC₅₀, K_i values, and bile acid–drug interaction (BDI) indices of bile acids whose inhibitory effect on OATP4C1 was >50%. From the screening results, lithocholic acid (LCA), glycine-conjugated lithocholic acid (GLCA), and taurine-conjugated lithocholic acid (TLCA) were newly identified as inhibitors of OATP4C1. Since the BDI index of LCA was 0.278, LCA is likely to inhibit OATP4C1-mediated transport in clinical settings. Our findings suggest that dose adjustment of renally excreted drugs may be required in patients with renal failure as well as in patients with hepatic failure. We believe that our findings provide essential information for drug development and safe drug treatment in clinics.     

Thermoelectric Properties of Multifilled Skutterudites with La as the Main Filler

Bulk multifilled n- and p-type skutterudites with La as the main filler were fabricated using the spark plasma sintering (SPS) method. The thermoelectric properties and thermal stability of these skutterudites were investigated. It was found that the interactions among the filling atoms also play a vital role in reducing the lattice thermal conductivity of the multifilled skutterudites. ZT = 0.76 for p-type La_0.8Ba_0.01Ga_0.1Ti_0.1Fe₃CoSb₁₂ and ZT = 1.0 for n-type La_0.3Ca_0.1Al_0.1Ga_0.1In_0.2Co_3.75Fe_0.25Sb₁₂ skutterudites have been achieved. Furthermore, the differential scanning calorimetry (DSC) results show that there is no skutterudite phase decomposition till 750°C for the La_0.8Ba_0.01Ga_0.1Ti_0.1Fe₃CoSb₁₂ sample. The thermal stability of the La_0.8Ba_0.01Ga_0.1Ti_0.1Fe₃CoSb₁₂ skutterudite is greatly improved. Using the developed multifilled skutterudites, the fabricated module with size of 50 mm × 50 mm × 7.6 mm possesses maximum output power of 32 W under the condition of hot/cold sides = 600°C/50°C.     

Locomotion Control of MEMS Microrobot Using Pulse‐Type Hardware Neural Networks

This paper presents the locomotion control of a microelectromechanical system (MEMS) microrobot. The MEMS microrobot demonstrates locomotion control by pulse‐type hardware neural networks (P‐HNN). P‐HNN generate oscillatory patterns of electrical activity like those of living organisms. The basic component of P‐HNN is a pulse‐type hardware neuron model (P‐HNM). The P‐HNM has the same basic features as biological neurons, such as the threshold, the refractory period, and spatiotemporal summation characteristics, and allows the generation of continuous action potentials. P‐HNN has been constructed with MOSFETs and can be integrated by CMOS technology. Like living organisms, P‐HNN has realized robot control without using software programs or A/D converters. The size of the microrobot fabricated by MEMS technology was 4 × 4 × 3.5 mm. The frame of the robot was made of a silicon wafer, equipped with rotary actuators, link mechanisms, and six legs. The MEMS microrobot emulated the locomotion method and the neural networks of an insect by rotary actuators, link mechanisms, and the P‐HNN. We show that the P‐HNN can control the forward and backward locomotion of the fabricated MEMS microrobot, and that it is possible to switch its direction by inputting an external trigger pulse. The locomotion speed was 19.5 mm/min and the step size was 1.3 mm. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(3): 43–50, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22473