Addition polymerization of norbornene, 5-vinyl-2-norbornene and 2-methoxycarbonyl-5-norbornene with a catalyst based on a palladium(0) precursor complex

Pd(dibenzylideneacetone)₂, when activated in situ with 1 equiv of [CPh₃][B(C₆F₅)₄] in the presence of 1 equiv of P(C₆H₁₁)₃, efficiently catalyzed the addition polymerization and copolymerization of norbornene and its derivatives. Homopolymerization of 5-vinyl-2-norbornene took place regio-selectively with the endo-cyclic double bond to give high-molecular weight polymers, while the exocyclic double bond remained intact so that the resulting polymer had pendent vinyl groups along the polymer chain. In the polymerization of a mixture of the endo-/exo- isomers of 2-methoxycarbonyl-5-norbornene, the endo-isomer was consumed prior to consumption of the exo-isomer, contrary to the well-known tendency in Pd(II)-based catalyst systems. Another notable feature of the present catalytic system was the strong dependency of the molecular weight on the reaction temperature, which was studied in detail for the copolymerization of 2-methoxycarbonyl-5-norbornene with norbornene: we could control the molecular weight without the use of a chain transfer agent. The extracted oligomeric fraction of poly(norbornene) showed the presence of a terminal CC double bond as well as a C₆F₅ unit that was bound to the first norbornane unit in the polymer chain.     

Electro-mechanical coupling in ionic gels

An ionic-polymer–metal-composite film shows electro-mechanical coupling. When the film is bent, electric current is induced. Measurement of the induced current indicates that the current depends on the speed of bending, but the total amount of the charge transferred across the film is independent of the speed, and depends only on the magnitude of the bending. The result indicates that in addition to previously proposed dynamical coupling effect, there is a static electro-mechanical coupling effect. Mathematical model is proposed to describe this phenomena.     

Predictive factors of psychological disorder development during recovery following SARS outbreak.

Objective: To investigate strategies for broad mass isolation during outbreaks of infectious diseases. Design: A survey using a self-administered questionnaire was conducted on 300 printing company workers in Beijing, China, which was under mass isolation following the 2003 SARS outbreak, in the 7-8 months after the isolation was lifted. Main Outcome Measures: Individuals with psychological disorders were classified on the basis of scores on the 30-item General Health Questionnaire during the recovery period. Psychological disorders were observed in 49 of 187 respondents (26.2%; 95% CI = 20.2, 32.7). Results: The predicting factor with the highest correlation was income reduction, with an odds ratio of 25.0. Other items obtained were gender, range of activities, eating restrictions, restrictions in going out, disinfection of clothing, and infection control, with odds ratios of 3.2, 5.5, 3.9, 3.2, 0.2, and 0.1, respectively, and the contribution ratio was 87.7%. Conclusion: Securing income is suggested to be important in future strategies. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Mechanism for change in leakage current waveform on a wet silicone rubber surface-a study using a dynamic 3-D model

This paper describes the results of experiments and simulations made to examine the waveform of leakage current flowing through the surface of HTV (high temperature vulcanized) silicone rubber specimen exposed to clean fog. Water droplets were placed on the surface of specimen energized with AC voltage and investigations of the surface state were done by a high-speed video camera in a wet condition produced by sprayed clean fog. Simultaneously, according to the experimental condition, a dynamic 3-D model was built to calculate the electric field and current density distribution on the specimen surface by a finite element software. A conducting water layer is formed due to the deformation of droplets and the development of dry band arcing. This caused large distortion and nonlinearly which increased the odd harmonic components in the leakage current waveform. This is in good agreement with the simulating calculation. The information from the leakage current frequency characteristic was extracted and correlated with the insulation surface condition. It can be considered as a diagnostic index for electrical characteristics and insulation state of polymer insulators in the wet condition.     

User Modeling in Spoken Dialogue Systems to Generate Flexible Guidance

We address the issue of appropriate user modeling to generate cooperative responses to users in spoken dialogue systems. Unlike previous studies that have focused on a user’s knowledge, we propose more generalized modeling. We specifically set up three dimensions for user models: the skill level in use of the system, the knowledge level about the target domain, and the degree of urgency. Moreover, the models are automatically derived by decision tree learning using actual dialogue data collected by the system. We obtained reasonable accuracy in classification for all dimensions. Dialogue strategies based on user modeling were implemented on the Kyoto City Bus Information System that was developed at our laboratory. Experimental evaluations revealed that the cooperative responses adapted to each subject type served as good guides for novices without increasing the duration dialogue lasted for skilled users.     

A pivot nonlinearity compensation by use of variable structure estimator for hard disk drives

This paper discusses robust seeking control of hard disk drives by the use of a variable structure multi-rate estimator (VSME). Compensation of pivot nonlinearity is one concern in the design of the seeking control, systems. Pivot nonlinearity is subject to uncertainties, and is difficult to deal with by a linear controller. The VSME estimates a class of uncertain disturbances and nonlinearities and yields compensation current through the linear feedback gain, which reduces the residual vibration and error during settling. Several experiments were carried out on several drives including a 3.5 in. 7,200 rpm drive. These experiments confirmed that the off-track probability after settling, which is defined by the number of seek failures over all trials, is much reduced to less than 1% when the drive is operated under a special temperature condition that increases pivot nonlinearity while the corresponding performance of a conventional linear controller is 12%. The seek failure is defined as the case when the position cannot be maintained within ±2.5% of a track pitch for a certain duration after track seeking mode.     

Flexible microelectronics: New application for thin‐film transistors in fingerprint sensors

Abstract— Thin‐film transistors (TFTs) are field‐effect transistors that can be used to create large‐scale‐integrated (LSI) circuits. The combination of high‐performance TFTs and transfer technology of the TFTs has the potential to foster the rise of a new flexible microelectronics industry. This paper discusses the current status of flexible microelectronics, using a TFT fingerprint sensor (FPS) as an example. Technology used in active‐matrix displays can easily be applied to the TFT FPS. TFT technology should not be confined to the display industry; its use should be expanded into the semiconductor industry. With the result presented in this paper, we declare a new era of flexible microelectronics open.     

A relation between edit distance for ordered trees and edit distance for Euler strings

We consider a relationship between the unit cost edit distance for two rooted ordered trees and the unit cost edit distance for the corresponding Euler strings. We show that the edit distance between trees is at least half of the edit distance between the Euler strings and is at most 2h+1 times the edit distance between the Euler strings, where h is the minimum height of two trees. The result can be extended for more general cost functions.     

Susceptibilities of bacteria isolated from patients with lower respiratory infectious diseases to antibiotics (1996)

The bacteria isolated from the patients with lower respiratory tract infections were collected by institutions located throughout Japan, since 1981. Ikemoto et al. have been investigating susceptibilities of these isolates to various antibacterial agents and antibiotics, and characteristics of the patients and isolates from them each year. Results obtained from these investigations are discussed. In 16 institutions around the entire Japan, 557 strains of presumably etiological bacteria were isolated mainly from the sputa of 449 patients with lower respiratory tract infections during the period from October 1996 to September 1997. MICs of various antibacterial agents and antibiotics were determined against 98 strains of Staphylococcus aureus, 93 strains of Streptococcus pneumoniae, 84 strains of Haemophilus influenzae, 84 strains of Pseudomonas aeruginosa (non-mucoid strains), 17 strains of Pseudomonas aeruginosa (mucoid strains), 31 strains of Moraxella subgenus Branhamella catarrhalis, 21 strains of Klebsiella pneumoniae etc., and the drug susceptibilities of these strains were assessed except for those strains that died during transportation. 1) S. aureus S. aureus strains for which MICs of oxacillin (MPIPC) were higher than 4 micrograms/ml (methicillin-resistant S. aureus) accounted for 67.3%. The frequency of the drug resistant bacteria increased comparing to the previous year's 52.7%. Arbekacin (ABK) and vancomycin (VCM) showed the highest activities against both S. aureus and MRSA with MIC80s of 1 microgram/ml. 2) S. pneumoniae Imipenem (IPM) and panipenem (PAPM) of carbapenems showed the most potent activities with MIC80s of 0.063 microgram/ml. Faropenem (FRPM) showed the next potent activity with MIC80 of 0.125 microgram/ml. The other drugs except erythromycin (EM), clindamycin (CLDM) and tetracycline (TC) were active against S. pneumoniae tested with MIC80s of 8 micrograms/ml or below. 3) H. influenzae The activities of all drugs were potent against H. influenzae tested with MIC80s of 4 micrograms/ml or below. Cefotiam (CTM), cefmenoxime (CMX), cefditoren (CDTR) and ofloxacin (OFLX) showed the most potent activities with MIC80s of 0.063 microgram/ml. 4) P. aeruginosa (mucoid strains) Tobramycin (TOB) showed the most potent activity against P. aeruginosa (mucoid strains) with MIC80 of 1 microgram/ml. Ceftazidime (CAZ), cefsulodin (CFS), IPM, gentamicin (GM), ABK and ciprofloxacin (CPFX) showed the next potent activities, with MIC80s of 2 micrograms/ml. The MIC80s of the other drugs ranged from 4 micrograms/ml to 16 micrograms/ml. 5) P. aeruginosa (non-mucoid strains) TOB and CPFX showed the most potent activities against P. aeruginosa (non-mucoid strains) with MIC80s of 1 microgram/ml. The MIC80s of piperacillin (PIPC) and cefoperazone (CPZ) were 16 micrograms/ml in 1995, and they were 64 micrograms/ml in 1996. 6) K. pneumoniae All drugs except ampicillin (ABPC) were active against K. pneumoniae. CMX, cefpirome (CPR), cefozopran (CZOP) and carumonam (CRMN) showed the most potent activities against K. pneumoniae with MIC80s of 0.125 microgram/ml. The MIC80s of the other drugs ranged from 0.25 microgram/ml to 2 micrograms/ml. 7) M.(B) catarrhalis Against M.(B.) catarrhalis, all drugs showed good activities with MICs of 4 micrograms/ml or below. IPM and minocycline (MINO) showed the most potent activities with MICs of 0.063 microgram/ml. Also, we investigated year to year changes in the characteristics of patients, their respiratory infectious diseases, and the etiology. Patients' backgrounds were examined for 557 isolates from 449 cases. The examination of age distribution indicated that the proportion of patients with ages over 60 years was 71.0% of all the patients showing a slight increase over that in 1994. Proportions of diagnosed diseases were as follows: Bacterial pneumonia and chronic bronchitis were the most frequent with 35.9% and 30.3% respectively. They were followed by bronchiectasis with a proportion of 10.