Role of protein kinase Cbeta in rhythmic contractions of human pregnant myometrium

To assess the role of protein kinase Cbeta (PKCbeta) in human myometrial contractions during pregnancy, we evaluated the effect of a PKCbeta inhibitor (LY333531) on the pregnant and nonpregnant myometrial contractions and compared the level of PKCbeta in the pregnant myometrium with that in the nonpregnant myometrium. The effects of LY333531 on the myometrial contractions were examined by measuring contractile activity (frequency and amplitude). PKCbeta in human myometrium was assessed at mRNA level using real-time PCR method. The characteristics of contractile activity were different between the pregnant and the nonpregnant myometrium. The amplitude of rhythmic contractions in the preterm and term myometrium was increased 2- to 2.5-fold when compared with that in the nonpregnant myometrium, but the frequency of rhythmic contractions was decreased by about half. LY333531 (10(-6) M) reduced the increased amplitude in the preterm and term myometrium by about 50%, and the inhibitory effects of LY333531 in the pregnant myometrium were significantly greater than that in the nonpregnant myometrium (about 50 vs 25%). However, the frequency in the pregnant and nonpregnant myometrium was not influenced by LY333531. Real-time PCR revealed a significant, five- to sevenfold increase in the expression of PKCbeta mRNA in the preterm and term myometrium when compared with the nonpregnant myometrium. These findings suggest that the increased amplitude of human myometrial contractions during pregnancy is related to the increased level of PKCbeta. A PKCbeta inhibitor may reduce preterm uterine contractions and prevent preterm delivery.     

Continuous-velocity lattice gas cellular automata for miscible binary fluid and its application to simulation of interface instability

Continuous-velocity lattice gas cellular automata (CVLGA) is extended to miscible binary fluid systems. A new parameter is introduced in order to control the diffusivity of the fluids. The correlation between the diffusivity and the new parameter proves that there exists the maximum value of the diffusivity. Quantitative verifications of the model are carried out with numerical simulations of the diffusion phenomena across a falling fluid film. The model is then applied to the simulations of Rayleigh-Taylor instability during the gravitational mixing phenomena. The qualitative tendency of the growth of the interface instability is the same as that obtained in conventional numerical methods.     

Equilibrium and kinetic studies of selective adsorption and separation for strontium using DtBuCH18C6 loaded resin

A crown ether loaded resin was prepared by successive impregnation and fixing the 4′,4′(5″)-di(tert-butylcyclohexano)-18-crown-6 (DtBuCH18C6) and its molecule modifier, 1-dodecanol, onto the porous silica/polymer composite support (SiO₂-P particles). The characterization of DtBuCH18C6 loaded resin was examined by thermal gravimetry and differential thermal analysis and electron probe microanalysis. The adsorption behavior of Sr(II), Cs(I), Ru(III), Pd(II), La(III), Nd(III), Sm(III), Gd(III), Zr(IV), and Mo(VI) was investigated by the batch method. Furthermore, the column test for Sr (II) was performed. The batch experiments were carried out by varying the shaking times, HNO₃ concentration, and initial concentration of metal ions. A relatively large K _d value above 182 cm³/g for Sr(II) was obtained in the presence of 3 M HNO₃. In contrast, the K _d values of Cs(I), Ru(III), Pd(II), La(III), Nd(III), Sm(III), Gd(III), Zr(IV), and Mo(VI) were considerably lower than 10 cm³/g. The adsorption of Sr(II) was found to be controlled by chemisorption mechanism, and followed a Langmuir-type adsorption equation. The breakthrough curve of Sr(II) had S-shaped profile, and the elution percentage was estimated to be 99.9% by using the eluent of H₂O.     

Microstructure and Thermal Shock Resistance of Molten Glass-Coated Carbon Materials Fabricated by Interfacial Control

Carbon substrates were coated completely with a molten silicate glass, where the wettability of carbon to glass was improved by infiltration and pyrolysis of perhydropolysilazane. Microstructures of the carbon–glass interface were dependent on P n ₂ during coating. Coating at lower P n ₂ induced the formation of cristobalite at the carbon–glass interface. When the coating was performed at higher P n ₂, the glass and carbon were strongly adhered, without the formation of cristobalite. Coating at higher P n ₂ improved the thermal shock resistance of the glass layer, because crack initiation was not induced by the phase transformation of cristobalite during the cooling process. In the case of coating at higher P n ₂, an oxynitride glass layer was formed at the glass subsurface by dissolution of N₂. A porous glass subsurface layer with uniform spherical micro-pores could be produced by soaking near the glass transition temperature in a steam environment. The porous layer with fine and homogeneous microstructure acts as a thermal shock absorbing layer, so that glass-coated carbon with a porous glass layer has excellent thermal shock resistance in addition to steam oxidation resistance.     

Mechanical strengthening of Si cantilever by chemical KOH etching and its surface analysis by TEM and AFM

Mechanical strengthening of a Si cantilever by applying KOH wet etching was investigated. Two kinds of Si cantilever specimens having the different crystallographic orientations of the sidewall surfaces, i.e., Si{100} and Si{110}, were fabricated from the same SOI wafer by a Bosch process. The typical height and pitch of the scalloping formed on the sidewall were 248 and 917 nm, respectively. A 50 % KOH (40 °C) chemical wet etching was applied to increase the fracture stress of the Si cantilever. The fracture stress in the both of Si{100} and Si{110} cantilevers increased with the advance of the etching. The obtained maximum fracture stress in Si{100} and Si{110} were 4.2 and 3.7 GPa, respectively. Sidewall surface of the cantilever was analyzed to investigate the mechanical strengthening of Si cantilever by wet etching. The etched surface crystalline was analyzed by the transmission electron microscope (TEM), and confirmed that the thickness of the affected flow layer was less than 10 nm from the obtained TEM image. Then the change of the surface roughness by the KOH etching was analyzed by the atomic force microscope. The surface was smoothened with the advance of the KOH etching. The roughness value of Ra in Si{100} and Si{110} decreased to 12.1 and 37.7 nm, respectively.     

Detection of norovirus RNA in bivalve molluscs by using bacteria-culture-employed method (A3T method)

Norovirus (NV) RNA has rarely been detected in foods despite the use of highly sensitive methods such as RT-PCR and real-time RT-PCR. In the modified method (A3T method) reported previously, a bacterial culture process was introduced into the standard protocol for NV detection to remove some inhibitor(s) present in food ingredients. To confirm the efficiency of the A3T method and to examine NV contamination in bivalve molluscs, we tried to detect NV RNA in bivalve molluscs on the market and in oyster samples associated with foodborne outbreaks by using the standard method and the A3T method. NV RNAs were detected in 20 samples (18.0%) of 111 bivalve molluscs, including oysters, on the market by use of the A3T method, while only one sample (0.9%) was positive according to the standard method. NV RNA was also detected in 10 of 35 oyster samples related to foodborne outbreaks by the A3T method. Those results show that the A3T method is suitable for the detection of NV in bivalve molluscs in general laboratories.     

Development of flexible displays using back‐channel‐etched In–Sn–Zn–O thin‐film transistors and air‐stable inverted organic light‐emitting diodes

We developed flexible displays using back‐channel‐etched In–Sn–Zn–O (ITZO) thin‐film transistors (TFTs) and air‐stable inverted organic light‐emitting diodes (iOLEDs). The TFTs fabricated on a polyimide film exhibited high mobility (32.9 cm²/Vs) and stability by utilization of a solution‐processed organic passivation layer. ITZO was also used as an electron injection layer (EIL) in the iOLEDs instead of conventional air‐sensitive materials. The iOLED with ITZO as an EIL exhibited higher efficiency and a lower driving voltage than that of conventional iOLEDs. Our approach of the simultaneous formation of ITZO film as both of a channel layer in TFTs and of an EIL in iOLEDs offers simple fabrication process.     

Fabrication of 5.8‐in. OTFT‐driven flexible color AMOLED display using dual protection scheme for organic semiconductor patterning

Abstract— A 5.8‐in. wide‐QQVGA flexible color active‐matrix organic light‐emitting‐diode (AMOLED) display consisting of organic thin‐film transistors (OTFTs) and phosphorescent OLEDs was fabricated on a plastic film. To reduce the operating voltage of the OTFTs, Ta₂O₅ with a high dielectric constant was employed as a gate insulator. Pentacene was used for the semiconductor layer of the OTFTs. This layer was patterned by photolithography and dry‐etched using a dual protection layer of poly p‐xylylene and SiO₂ film. Uniform transistor performance was achieved in the OTFT backplane with QQVGA pixels. The RGB emission layers of the pixels were formed by vacuum deposition of phosphorescent small molecules. The resulting display could clearly show color moving images even when it was bent and operated at a low driving voltage (below 15 V).     

Methanogenic digestion using mixed substrate of acetic, propionic and butyric acids

Experiments on methanogenic digestion using high concentrations of mixed substrate were conducted. The major intermediate products of anaerobic digestion such as acetic, propionic and butyric acids were mixed in a ratio of 2:1:1 (COD basis), respectively, and used as a substrate for feeding into continuous-flow chemostat reactors maintained at 35°C. These reactors were operated stably at higher feed substrate concentrations and shorter hydraulic retention times (HRT) than those of using a single component of volatile fatty acids as a substrate. At an HRT of 4.43 days, the methanogenesis occurred normally up to a feed substrate concentration of 70,000 mg COD I⁻¹. At a feed substrate concentration of 20,000 mg COD I⁻¹, the methanogenesis occurred normally up to an HRT of 2.91 days and the minimum SRT for microbial populations was calculated to be 2.42 days. An increase in feed substrate concentration adversely affected the propionate degradation strikingly, while a decrease in HRT significantly adversely affected the acetate and propionate degradation. The methane production was 0.301 g⁻¹ COD utilized, and it was independent of the feed substrate concentration and HRT. Bacilli were predominant in all reactors, but sarcinae appeared in the reactors with high feed substrate concentrations and short HRTs. Phenomena in digester failure due to methanogen washout were also observed.     

MiR-10a in Pancreatic Juice as a Biomarker for Invasive Intraductal Papillary Mucinous Neoplasm by miRNA Sequencing

New biomarkers are needed to further stratify the risk of malignancy in intraductal papillary mucinous neoplasm (IPMN). Although microRNAs (miRNAs) are expected to be stable biomarkers, they can vary owing to a lack of definite internal controls. To identify universal biomarkers for invasive IPMN, we performed miRNA sequencing using tumor-normal paired samples. A total of 19 resected tissues and 13 pancreatic juice samples from 32 IPMN patients were analyzed for miRNA expression by next-generation sequencing with a two-step normalization of miRNA sequence data. The miRNAs involved in IPMN associated with invasive carcinoma were identified from this tissue analysis and further verified with the pancreatic juice samples. From the tumor-normal paired tissue analysis of the expression levels of 2792 miRNAs, 20 upregulated and 17 downregulated miRNAs were identified. In IPMN associated with invasive carcinoma (INV), miR-10a-5p and miR-221-3p were upregulated and miR-148a-3p was downregulated when compared with noninvasive IPMN. When these findings were further validated with pancreatic juice samples, miR-10a-5p was found to be elevated in INV (p = 0.002). Therefore, three differentially expressed miRNAs were identified in tissues with INV, and the expression of miR-10a-5p was also elevated in pancreatic juice samples with INV. MiR-10a-5p is a promising additional biomarker for invasive IPMN.